Used Wire Bending Machines for sale (66,027)

Condition: ready for operation (used), Year of construction: 2020, Shaft bottom/top: 30mm/30mm, max. round tube length: 48mm, max. round tube diameter: 3mm, max. flat bar dimensions X/Y: 50mm/10mm, max. square tube dimensions X/Y/Z: 40mm/30mm/3mm, weight: approx. 200kg. Documentation available. An on-site inspection is possible. Iodpoxt Rmrjfx Abrjan

Condition: ready for operation (used), Year of construction: 1999, Tube diameter: 25mm, wall thickness: 2mm, bending angle: 190°, feed length: 2000mm, weight: 2t, left-bending. Accessories: CNC IsoBend 2.0. Without mandrel bending device, monitor glass has impact damage but is still functional. An on-site inspection is possible. Iaedsxcx Atopfx Abron

Year of construction: 1987, condition: ready for operation (used), A Mitsubishi wire EDM machine including an automatic wire changer (AWF system) is available. Travel X/Y: 381mm/749mm, table dimensions X/Y: 647mm/797mm, max. workpiece dimensions X/Y/Z: 647mm/749mm/259mm, max. workpiece weight: 950kg. Machine dimensions X/Y/Z: approx. 1850mm/2600mm/1950mm, weight: approx. 4100kg. Including 12 wire spools and one ceramic replacement plate. The wire changer is defective. Documentation available. An on-site inspection is possible. Iasdpfx Abjx Hz Shjrsn

Year of construction: 1997, condition: ready for operation (used), Wire diameter (single wire): 6mm-14mm, wire diameter (double wire): 6mm-10mm, maximum bending angle: 180°, motor power: 22kW, feed rate: 1.5m/s, bending speed: 1000°/s, cutting time: 0.4s, hydraulic tank volume: 300l. Machine dimensions X/Y/Z: approx. 4900mm/1640mm/2200mm, weight: approx. 3300kg. Control system defective. Documentation available. On-site inspection is possible. Iasdpfx Ajuwrv Debren

Condition: ready for operation (used), Year of construction: 2005, Bending direction: clockwise, steel tube diameter: 50mm, steel tube thickness: 3mm, stainless steel tube diameter: 50mm, stainless steel tube thickness: 2mm, max. section modulus: 5cm³, bending angle: 180°+10°, max. tube length: 2000mm, max. radius range: 150mm, bending height: 1050mm, bending head length: 850mm, min. bend spacing: 400mm, nominal pressure: 250bar, operating pressure: 200bar. Machine dimensions X/Y/Z: approx. 3200mm/1400mm/1300mm, weight: approx. 1500kg. Documentation available. An on-site inspection is possible. Iaodpfexwyw Ijx Abrjn

Condition: ready for operation (used), A defective press brake Trumpf is available. Press force: 2000kN, bending length: 4080mm, ram stroke: 365mm, table-ram distance: 632mm, max. opening height: 535mm, angular adjustment: +/-10mm, throat depth: 410mm, frame distance: 3680mm, table width: 200mm, working height: 1050mm. Machine dimensions X/Y/Z: approx. 4650mm/2250mm/2900mm, weight: approx. 18000kg. The control board is defective. The machine is equipped with intact bending aids on both sides. Documentation available. On-site inspection is possible. Iajdpfx Abex I Rq Ajrsn

Condition: ready for operation (used), A mandrel tube bending machine Sommer is available. Tube diameter range: 15mm-65mm, tube feed length: 3000mm, max. bending radius: 150mm, chuck: 200mm, tube clamping: hydraulic. Including accessories. Documentation available. An on-site inspection is possible. Iedpfx Aboxl Up Uersan

Condition: ready for operation (used), An automated tube bending system with two Wafios bending heads and a Kuka twister robot is available. 1) Bending head Wafios RB20, bending direction: left and right, max. total tool height: 78mm, bending capacity: 360Nm, bending speed: 560°/s, bending radius: 57mm, repeat accuracy bending, turning and feed: +/-0.05mm. 2) Robot Kuka KR 16-2 KRC 2, axes: 6, payload: 16kg, max. reach: 1611mm, repeat accuracy: +/-0.05mm, weight: approx. 235kg. Including suspended magazine, Kuka control cabinet, outfeed conveyor, safety fence, movable control panel, docking station and work table. Documentation available. On-site inspection is possible. Isdpfxewwlkio Abrsan

Year of construction: 1990, condition: ready for operation (used), With dielectric, fully automatic water treatment system with ion exchanger, filtration system, clamping system with generator and adaptive discharge unit for precise machining, cooling and hydraulics, external pump and filtration systems. Without documentation, maintained internally, pneumatic hoses have been renewed, the machine has not been in operation since 2022 but was last functional. A clamping system is optionally available. An on-site inspection is possible. Iaodpfx Abew S Tygorjn

Year of construction: 2005, condition: ready for operation (used), Max. bending diameter: 30mm, an inspection is possible. Iodpfx Aerc Hiiebroan

Condition: ready for operation (used), Year of construction: 1979, Two Bihler GRM-50 are available, year of manufacture: 1979/1987. Feed length: 320mm, max. strip width: 40mm, wire diameter range: 0.5-5mm, center punch stroke: 52mm, max. production speed: 132 pieces/min. Dimensions X/Y/Z: approx. 2600mm/1500mm/1900mm, weight: approx. 3500kg. Iodpfx Abotvar Ijrsan

Condition: ready for operation (used), Year of construction: 2017, Performance range: 20mm-60mm, max. bending angle: 180°+10°, max. bending radius: 150mm, effective length: 3048mm, bending height: 1050mm, max. section modulus: 12.1cm³, bending tolerance: +/-0.1°, operating pressure: 200bar, connected load: 4kW, machine dimensions X/Y/Z: approx. 2000mm/900mm/1200mm, weight: approx. 500kg. Documentation available. On-site inspection is possible. Iedpjwg E Dhofx Abrsan

Year of construction: 1989, condition: ready for operation (used), An old folding machine Schröder is available. Working width: 2500mm, max. material thickness: 2.5mm, upper beam stroke: 80mm, adjustment: 160mm, speed: 120°/s, working height: 850mm, weight: approx. 3500kg. A visit on site is possible. Iodpfx Aboxxa U Nsroan

Year of construction: 1995, condition: ready for operation (used), X-axis: 400mm, Y-axis: 250mm, Z-axis: 256mm, max. workpiece weight: 400kg, max. workpiece dimensions: 580/860/250mm, support surface: 680/500mm, min. start hole diameter: 2mm, cutting rate: 185mm²/min, generator: Agiplus-MMD, control: Agimatic CF20. With dielectric processing unit DA-15/C. The display power supply is defective. The machine has already been dismantled, an on-site inspection is possible. Iaodjw Sxx Iepfx Abron

Year of construction: 2008, condition: ready for operation (used), A flat steel bending machine for the production of ZB frames is available. Pneumatic pressure: 8bar, hydraulic pressure: 100bar, weight: approx. 5000kg. An on-site inspection is possible. Iodpfxsxvrv Hs Abrjan

Year of construction: 1990, condition: ready for operation (used), Offered is a straightening machine with cold rolling unit. 2-fold wire coil payoff, installed are: GSG COMBI rolling stand year 1994, GSG KWG.3 rolling stand year 1991, roller driver GSG ERT year 2007, straightening and cutting unit Wafios RBK51M year 2000, wire drawing unit 1 pass, wire diameter 6.0mm-12.0mm, max. speed 120m/min, min. cutting length 1600mm, cutting rate up to 80cuts/min, inlet strength approx. 50daN/mm². Package dimensions for finished material up to max. 14000mm length, up to 1000 bars per bundle. Length of the system approx. 5000mm. The system is offered without safety fence. Viewing possible by arrangement. Iaedpexzikfjfx Abren

Condition: excellent (used), functionality: fully functional, CURVAPROFILI GAIANI DIAMETER 40 3 ROLLERS HORIZONTAL USED MACHINE INTERNAL CODE: SVR 370 Iaodpfxexzgnnj Abrsn

Condition: excellent (used), functionality: fully functional, Gade Bending Machine Iajdpewrrhwefx Abrjn 3100 X 25 Ton Mod. 30/25 Used Machine Internal Code: Svr 317

Condition: used, Year of construction: 2007, Amada punch press EMK 3610NT including MP300 loading unit for sale. We would like to sell the machine as a complete package with tooling and a Wilson X-Sharp grinding machine. The standard tools are listed in the attached inventory. I can send it to you via email. Iaedpow Hww Hjfx Abrsn

Year of construction: 1990, condition: ready for operation (used), Working width: 3000mm, max. sheet thickness: 110mm, with CNC control, central lubrication, cone bending device, infeed carriage, one upper and two lateral cylinder support devices. Iajdpfx Abjnvfc Eeron

Year of construction: 1981, condition: ready for operation (used), Working width: 2500mm, max. sheet thickness: 20mm, lateral cylinder support device with three adjustable support rollers and conical bending device, machine provided for exchangeable top rollers up to min. Ø 450mm, machine revision 2009, factory inspection 2012. Iodpfonvfdbox Abroan

Year of construction: 1990, condition: ready for operation (used), Working width: 3000mm, max. sheet thickness: 120mm, with optical display of roller adjustment, central lubrication, cone bending device, overrun brake and exchange top roller Ø820mm and Ø740mm. Isdpenvfdfjfx Abroan

Year of construction: 2011, condition: ready for operation (used), Max. working length: 2000mm, compressed air supply: 6bar, connected load: 1200W, the machine was hardly used. Iodpolc N Spefx Abrean

Year of construction: 1984, condition: ready for operation (used), Working width: 3000mm, max. sheet thickness: 12mm, with digital display of roller adjustment, central lubrication, air cooling, cone bending device and CNC controls. Iodpfx Aonvfctobrean

Year of construction: 1992, condition: ready for operation (used), Working width: 3050mm, workpiece thickness: 3-15mm, connected load: 9.6kVA, length: 4986mm, width: 2000mm, height: 1670mm, weight: 2.7t, including documentation. Isdpfxeibdn Hs Abrean