Used Worm Hackers for sale (350)

Year of construction: 2006, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC Panel PC, overall weight: 2,100 kg, total width: 1,650 mm, total height: 2,050 mm, product length (max.): 1,200 mm, number of axes: 1, Surface grinding machine manufactured in 2006. This STAEHLI DLM 450 features a lapping wheel diameter of 450 mm and a maximum lapping wheel speed of 110 rpm. It has a robust machine weight of 2100 kg and dimensions of 1200 × 1650 × 2050 mm. If you are looking to get high-quality lapping capabilities, consider the STAEHLI DLM 450 machine we have for sale. Contact us for further details regarding this machine. Iodpfszyp Arex Ap Djbc - Voltage / Frequency: 400 V / 50 Hz- Max. Current: 50 A- Power Consumption: 26 kW- Wiring Diagram No.: S-2816- Machine Weight: 2100 kg (Nameplate) / Net weight 1900 kg- Dimensions: 1200 × 1650 × 2050 mm- Lapping Wheel Diameter: Ø 450 mm- Lapping Wheel Speed: 0–110 rpm- Max. Lapping Wheel Drive Power: 2 kW- Max. Load on Upper Lapping Wheel: 20 daN- Internal Drive Speed: 0–115 rpm- Max. Internal Drive Power: 0.5 kW- Lapping Wheel Drive Motors (DC Motor): Armature Voltage 260 V, Field Voltage 340 V, Speed 3110 rpm, Power 2 kW, Forced Ventilation 220 V (50/60 Hz)- Internal Drive Motor: Continuously variable DC Motor, Armature Voltage 260 V, Field Voltage 340 V, Speed 3110 rpm, Power 0.5 kW, Forced Ventilation 220 V (50/60 Hz)- Vertical Motion Motor: Stepper motor, 50 steps/sec, Torque 1100 Nm- Ring Gear Adjustment: AC brake motor (2 positions), 380 V / 50 Hz, Speed 700–1400 rpm, Power 0.25/0.37 kW, DC Brake 24 V (16 Nm)- Power Converter: Input 380 V / 50 Hz, Armature Voltage 270 V, Field Voltage 340 V- Worm Gear Ratios: Internal drive i = 1 : 30, Lower system i = 1 : 15.5, Upper system i = 1 : 15.5- Operating Compressed Air Pressure: 6–7 bar- Lapping Fluid Pump: 380 V / 50 Hz, Speed 2600 rpm, Flow rate 57 l/min, Protection class IP 44- Control and Measuring Device: Measuring range ±3 to ±11,000 mm (Millitron manual reference)- Inductive Sensor: Measuring range ±2 mm- Setpoint Adjustment Device: 4-digit display- Control Panel / System: Siemens SIMATIC Panel PC- Control System Processor: Intel Celeron M processor 1.50 GHz- System Memory: 1562624 KB (Ext. Memory), 640 KB (System Memory), 384 KB (Shadow Ram), 1024 KB (Cache Ram)- Hard Disk Storage: 40021 MB (Hard Disk 2)- BIOS / System Date: PhoenixBIOS, BIOS Date Operating System: Microsoft Windows XP Professional / Microsoft Windows Recovery Console

Condition: excellent (used), Year of construction: 2019, MAXXMILL 750 5-SIDE UNIVERSAL MACHINING CENTER SIEMENS 840D SL, 15,000 RPM 5-Side Universal Machining Center with integrated tool magazine, 30 positions Control: Sinumerik 840D-sl / OPERATE o SHOPMILL dialog programming o USB interface o Network drive / Ethernet o 22" TFT color touch monitor o 3D simulation o EMCONNECT Spindle: Motor spindle, water-cooled Spindle power: max. 20 kW Speed: 50 - 15000 RPM Torque: max. 100 Nm Tool holder: ISO 40 DIN 69871 Drawbar: ISO7388/2 Type B (not included in the basic machine) Travel: X=750+50mm, Y=610mm, Z=500mm Spindle nose – table distance: 150–650 mm Rapid traverse X-Y-Z: 30 m/min B-,C: 25 RPM Table: Ijdpfx Apsz Anw Ho Debc driven by worm gear Cast table, ground with T-slots Number – Width – Spacing: 5 – 14 – 100 Clamping area: 750 x 600 mm Table load maximum: 300 kg Tool changer: Drum magazine with 30 tool positions. Tool change time (chip to chip): 4.9s (VDI2852) Standard equipment: o Advanced Surface (Siemens option) o LED work area lighting o Spindle air blow-out device for cleaning the tool holder during tool change o Central lubrication o Coolant pump 2 bar o Coolant tank 250 liters o Leveling elements (5 pieces) o Tool magazine door for maintenance o Direct measuring system B-axis Year of manufacture: 2019 Machine no.: M-007.038.19 includes: 8AO-PRESET750SIE LASER DEVICE MARPOSS 8AO-VOLREMSIE630 ELECTRONIC HANDWHEEL 8AO-ADDREFMM750EI AIR - LIQUID COOLING 8AO-TRASPMM750 HINGED BAND CHIP CONVEYOR MM750 8AO-IMPLAVXX50 SPRAY GUN 8AO-COMM750XX01 STANDARD PACKAGING 8AO-MAGUT750XX05 TOOL MAGAZINE FOR 40 TOOLS MM750 8AO-CICMI750SIE AUTOMATIC WORKPIECE MEASUREMENT WIRELESS 8AO-SUPTAVOLAMM750 FRONT SUPPORT TABLE 8AO-APPLGRMM751 ROTARY TABLE THROUGH SPINDLE 8AO-PLU08S00119A AUTOMATIC LOADING DOOR RIGHT MM750 8AO-ILU08X00119A MACHINE ROOM FLUSHING 8AO-ROTTSIE750 GLASS SCALE 3 AXES X-Y-Z SIEMENS 8AO-TRASFUM750MM 40-POSITION MAGAZINE ISO40 ACCORDING TO DIN69872 8AO-COPSUPXX750 UPPER MACHINE COVER MAXXMILL 750 8AO-INTROB012 STANDARD HANDLING INTERFACE PROFINET 8AO-CIN250LMSIE KINEMATIC MEASURING CYCLE 8AO-APPLEN750SIE DIRECT MEASURING SYSTEM B AND C 8AO-MM7503D 3D DATA MODEL MaXXmill 750

Condition: new, Year of construction: 2026, New machine Year of manufacture: 2026 Ibedpfxezpzzfs Ap Dec Technical specifications: Hopper opening with log spacer: 600 x 1,050 mm Hopper capacity: approx. 0.6 m³ Working width of the rotor: 600 mm Diameter of the rotor: 256 mm Drive power: 18.5 kW Rotor speed: 90 rpm Number of knives: 28 Type and size of knives: concave / 40 x 40 mm, cutting reversible tips Screen perforation: 15/20 mm Paint finish: Weima standard RAL 2002 / 7016 Connection value: 400 V +/- 5 % / 50 Hz Includes: Control cabinet incl. 5 m cable Electrical control Star-delta starter Rubber vibration dampers V-rotor (patented) with knife pockets milled into the profile Gearbox limit switch 2nd knife row Log spacer (free-cutting hopper) Hold-down device on the slide Availability: short notice Location: Solingen

Condition: good (used), DREISTERN P3.100.40/3 Profiling Line – 44 driven stations with flying shear Short title for platforms with character limitations: DREISTERN P3.100 Profiling Line, 44 Stations + Shear Platform Data * Machine Type: Profiling Line / Roll Forming Line * Manufacturer: DREISTERN-WERK * Model: P3.100.40/3 * Year of Manufacture: 2002 * Factory Number: 02 098 * Order Number: 38933-46 * Condition: Used, disassembled * Control System: Not available For sale is a comprehensively equipped DREISTERN profiling line, type P3.100.40/3, with 48 stations, 44 of which are driven, as well as an inline shear (“flying shear”). The line features quick-change plates, mechanical quick clamps, and a coolant piping system. Due to the large number of profiling stations, it is particularly suitable as a mechanical base for demanding, customer-specific roll forming applications. An expansion with additional stations is structurally possible. According to the previous operator, the line operated flawlessly until it was disassembled at the customer's plant. The control system is not available and is not included in the scope of supply. Recommissioning or control system adaptation by the buyer is therefore necessary. Machine Bed and Drive * Production direction: from right to left * Center distance: 330 mm * 48 stations total * 44 stations driven, with 44 gearboxes * Quick-change plates * Mechanical quick clamps * Coolant piping system * 1 × Baumüller DC motor, 42 kW * 1 × Baumüller DC motor, 15 kW Profiling Frames * Number included in scope of supply: 44 pieces * Tool width per frame: 275 mm * Working shaft diameter: 50 mm * Working shaft connection: 30 mm with keyway * Lower shaft mostly fixed; 6 frames with adjustable lower shaft * Axial adjustment * Adjustment range lower to upper shaft: 80–170 mm Gearboxes Iedpfxjzzyd Aj Ap Dobc * Worm gear ratio: 1:21 * Lower/upper shaft ratio: 1:1 Inline Shear * Travel path: 1,900 mm * Profile rail guidance * Ball screw drive * Bosch servo motor * Valve block with punching unit * Folding table length: 3,000 mm * Emergency stop Scope of Supply * Machine bed with gearbox support * Infeed table * Pneumatic measuring wheel unit * Straightening device * Belt filter unit, 800 liters * Hydraulic unit for the shear * 44 gearboxes * 44 profiling frames * 2 Baumüller DC motors * 66 universal joints * Inline shear according to the above description

Condition: good (used), DREISTERN P3.100 Profiling Line – 16 driven stations and 2 × 18.5 kW Short title for platforms with character limits: DREISTERN P3.100 Profiling Line, 16 driven stations Platform data * Machine type: Profiling line / Roll forming line * Manufacturer: DREISTERN * Model: P3.100 * Year of manufacture: not known / to be added before publication * Condition: used, dismantled * Control system: not available For sale is a DREISTERN profiling line, type P3.100, with 18 stations, 16 of which are driven. The line is equipped with 16 profiling stands, 50 mm working shafts, quick-change plates, and two Bosch motors, each with 18.5 kW. The modular design with mechanical quick clamps and quick-change plates is suitable as a solid mechanical base for customer-specific roll forming applications. A constructive expansion with additional stations is possible. According to the previous operator, the line operated flawlessly until it was dismantled at the customer's site. The control system is not available and is not included in the scope of supply. Recommissioning or control system adaptation by the buyer is therefore necessary. Machine bed and drive * Production direction: from left to right * Axle distance: 330 mm * 18 stations in total * 16 stations driven, with 16 gearboxes * Quick-change plates * Mechanical quick clamps * Coolant piping * 2 × Bosch motor, each 18.5 kW Profiling stands * Number in scope of supply: 16 pieces * Tool width per stand: 275 mm * Working shaft diameter: 50 mm * Working shaft connection: 30 mm with groove * Fixed lower shaft * Axial adjustment * Adjustment range lower to upper shaft: 80–170 mm Ibodpfx Aezzyd Nep Dsc Gearboxes * Worm gear ratio: 1:7.5 * Lower/upper shaft ratio: 1:1 Scope of supply * Machine bed with gearbox support * Infeed table * Pneumatic measuring wheel unit * Special straightening device * 16 gearboxes * 16 profiling stands * 2 Bosch motors, each 18.5 kW * 32 universal joints

Condition: refurbished (used), Year of construction: 2027, functionality: fully functional, gear diameter: 250 mm, spindle speed (max.): 71 rpm, spindle speed (min.): 35 rpm, total height: 1,800 mm, total length: 2,200 mm, total width: 1,800 mm, controller manufacturer: Siemens Sinumerik ONE, drive type: Sinamics S120, control type: CNC control, Equipment: rotational speed infinitely variable, Economical production of straight-toothed bevel gears – both in single units and in series: The SW KF 250 is based on the proven cast iron bed of the Chemnitzer Modul ZFTK 250 and is completely rebuilt by Serwema Retrofit Solutions, with Siemens Sinumerik ONE, digital Sinamics S120 drives, and an electronic worm gear between the workpiece and weighing drive. The machine mills using the convoid process, a universal and highly economical process for straight-toothed bevel gears, as well as producing herringbone gears and spur couplings. Application areas: agricultural machinery, gearbox construction, drive technology, railways and mining – anywhere where straight-toothed bevel gears up to 250 mm are required and new machines are hardly offered. Delivery time is five to six months from order, with acceptance testing in Chemnitz together with you. The SerWeMa gear cutting software guides the operator through workpiece and tool data using masks, without the need for programming. Integrated technology cycles: plunging, rolling, plunging and rolling, and plunging with double rollers. Engagement angles from 14 to 28° can be freely selected, and the number of teeth can range from 6 to 100. The stiff, ribbed cast iron bed provides the static and dynamic rigidity for bevel gears up to module 7 with a tooth width of 40 mm; the hydraulic and coolant unit is integrated into the bed, with components from Rexroth, Parker and Hydac, and pulse lubrication from Bielomatik. All worm gears are newly manufactured in bronze. Technical data: max. bevel gear diameter 250 mm, max. module 7, number of teeth 6–100, max. tooth width 40 mm, engagement angle 14–28°, distance between workpiece spindle and bevel tip 40–280 mm, workpiece spindle mount 80 mm metric, cutter head diameter 355 mm with 22 cutters per side, cutter head speed 35–71 rpm, connection value 30 kVA. Installation dimensions approx. 2.5 × 2.1 × 1.9 m, weight approx. 6 t. Ibjdez E H Dbspfx Ap Dec Scope of supply: complete electrical equipment with Siemens Sinumerik ONE and Sinamics S120, climate-controlled control cabinet manufactured in-house, dialog software, all worm gears in bronze, magnetic chip conveyor, circulation and pulse lubrication, hydraulic unit, coolant system, new paint RAL 5015/7035, geometric acceptance test according to SerWeMa protocol based on DIN standards, documentation (operating manual, electrical diagrams with parts lists, hydraulic and lubrication diagram), CE marking. Optional: installation, commissioning and operator training at your site.

Condition: used, Year of construction: 1992, Used Machine Ibodpfx Apezy Dzcj Dec Year of manufacture: 1992 Features and technical specifications: - Designed for small workshops, with 1 Combi unit for top-down sanding - Working width: 950 mm - Sanding belt dimensions: 970 mm wide, 1,700 mm long - 1 combined contact roller/sanding shoe unit, drive motor 7.5 kW, with contact roller rated at 85 Shore and a sanding shoe with felt pad and sliding lining - DFL veneer sanding unit - with workpiece-controlled air-cushion sanding shoe - Protected sanding shoe storage inside the machine - Sanding belt drive with automatic star-delta start and maintenance-free, wear-free electric braking system - Additional storage for an extra sanding tongue - Safety shut-off when the door is opened - Pneumatic sanding belt tensioning device - Belt feed mechanism, driven by a worm gear motor, feed speeds of 4 and 8 m/min, and automatic control for belt travel - LED digital display for workpiece thickness adjustment - Safety shut-off at the machine inlet in case of excessive workpiece thickness - Indicator lights showing operational readiness - Optimally positioned dust extraction hood with connection (D=160 mm) for the sanding belt - Roller table at the inlet - Complete pneumatic control system, including automatic pressure switch, control, and monitoring devices - All electrical switching elements—main switch, fuses, contactor control with motor protection relays, and display devices—in VDE-compliant design - Total connected load: approx. 9 kW - Operating voltage: 400 V, 50 Hz - Dimensions: W x L x H approx. 1560 x 1740 x 2000 mm - Exhaust port: 1 x 160 mm - Weight: approx. 1200 kg

Condition: used, Year of construction: 1995, functionality: fully functional, Drum Grinding and Polishing Unit Manufacturer: UHLIG, Type UB 22 Year: 1995 Technical Data: Make: Werner Uhlig Model: UB 22 Year of manufacture: 1995 Drive: Worm gear with motor Rotational speed: 5.6 – 54 l/min Shaft diameter: 25 mm, max. torque: 34 Nm Motor power: 0.25 kW Dimensions: approx. 1.00 x 0.90 x 1.20 m Weight: approx. kg (not specified) Equipment: - Control with frequency inverter - 2 single-chamber drums, approx. 200 mm wide, diameter 260 mm - Infinitely variable drum speed Iodpfxeyw Rhme Ap Dsbc - Fresh water rubber hose - Waste water drain connection All details are subject to change without notice. A demonstration under power is possible at any time in our exhibition hall.

Condition: good (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 06 03 1000, Country of manufacture: CH Voltage: 400V Dimensions: 1200 x 1650 x 2050 mm Net machine weight: 1900 kg TECHNICAL SPECIFICATIONS Machine: Disc rotation speed: 0–110 rpm Maximum drive power for discs: 2 kW Maximum upper disc load: 20 daN Disc diameter: Ø 450 mm Internal drive rotation speed: 0–115 rpm Maximum internal drive power: 0.5 kW Disc drive motors (continuous motor): Type: DC motor Armature voltage Ua: 260 V Field voltage Ue: 340 V Rotation speed: 3110 rpm Power: 2 kW External ventilation: 220V, 50/60 Hz Internal drive motor: Motor type: smooth operating mid-position control motor Armature voltage Ua: 260 V Field voltage Ue: 340 V Rotation speed: 3110 rpm Power: 0.5 kW Separate ventilation: 220V, 50/60 Hz Vertical drive motor: Type: stepper motor Steps per second: 50 Torque: 1100 Nm Crown gear adjustment: Type: AC brake motor 2 positions Voltage: 380V / 50 Hz Rotation speed: 700–1400 rpm Power: 0.25/0.37 kW DC brake: 24V Braking torque: 16 Nm Power converters: Input voltage: 380V / 50 Hz Induced voltage: 270 V Field voltage: 340 V Worm gear reduction ratio (internal drive): Ratio: i = 1 : 30 Worm gear reduction ratio (lower system): Ratio: i = 1 : 15.5 Worm gear reduction ratio (upper system): Ratio: i = 1 : 15.5 Operating pressure: Air circuit: 6–7 bar Iedpow T Tpdefx Ap Dobc Lapping fluid pump: Connection voltage: 380V 50Hz Rotation speed: 2600 rpm Flow rate: 57 L/min Protection: IP 44 Control and measurement device: Measurement range: 6 (±3 to ±11000 mm) See details in Millitron user manual Inductive probe: Measurement range: ±2 mm Setpoint adjustment device: Display: 4 digits Unless stated otherwise, all technical data are provided without guarantee and subject to change or error.

Condition: used, Holac Industrial Dicing Machine – VA Series (VA 90 / VA 120) Manufacturer: Holac Type: Industrial Dicing / Cubing Machine Model: VA Series (exact model to be confirmed) Availability: Direct Ibsdpfx Apsx Ti Hmj Doc Description This Holac industrial dicing machine is designed for high-capacity and precise cutting of a wide range of food products. The machine is equipped with a robust worm feed system, ensuring consistent product flow and uniform cutting results. Suitable for cutting products into cubes, strips or slices, depending on the installed knife set. Ideal for meat, cheese, vegetables and plant-based products. The machine is fully stainless steel, hygienically designed and easy to clean. Equipped with an original Holac Panelware control panel. Key Features - High-capacity industrial dicing machine - Continuous worm feed system - Interchangeable knife grids for different cutting sizes - Suitable for fresh and lightly frozen products - Solid stainless steel construction - Reliable and proven Holac technology Technical Specifications (approx.) - Capacity: up to 1,500 – 3,000 kg/hour (product dependent) - Cutting sizes: approx. 5 x 5 mm up to 40 x 40 mm - Product temperature: fresh to approx. -2 / -3 °C - Power supply: 400V / 50 Hz - Installed power: approx. 5.5 – 7.5 kW - Material: stainless steel (food grade) Applications - Meat (fresh or lightly frozen) - Cheese - Vegetables - Plant-based products - Convenience & pet food - Machine is in good working condition and ready for production. Video available on request. 📍 Located in the Netherlands 🌍 Worldwide delivery possible The information contained in this advertisement is for general information purposes only. Although care has been taken to ensure accuracy, no liability is accepted for any errors or omissions. Specifications are subject to change. More photos and full specifications: /

Year of construction: 2016, condition: ready for operation (used), Offered is a high-precision worm and thread grinding machine MIKROMAT 20G, used as a test and trial machine, nearly all available options included, technically flawless condition. Capabilities: external thread grinding, internal thread grinding, whirling Whirling, grinding length max. 2000mm, workpiece diameter max. 320mm, distance between centers: 2250mm NC tailstock option: 2050mm, workpiece weight max. 200kg 350kg NC tailstock, pitch range: 0-400mm, 7-axis system, feed speed: up to 15000mm/min, setting angle: +/-40°, positioning accuracy: uncertainty 0.0024mm P, upgrade to 23.5kW continuous power/45kW maximum power, grinding wheel speed: up to 50m/s, special equipment internal grinding: internal thread diameter up to 100mm, length up to 50mm, coolant system: KNOLL compact unit vacuum rotary filter, 2500l tank volume and oil cooling, installation dimensions X/Y/Z: approx. 6500mm/4000mm/3000mm, total weight: approx. 13000kg, inspection possible by arrangement. Ibedpfxoylbr Do Ap Dsc

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface Ibsdpjyxdwdefx Ap Doc • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: excellent (used), Year of construction: 2019, Geared motor, electric motor, electric geared motor, worm geared motor, flat geared motor Ibjdpfx Aezu S Hpop Doc -Condition: Geared motor is unused -Manufacturer: NORD DRIVESYSTEMS, Flat gearbox series F -Type: SK7382AZH-180MP/4 TF -Speed: 22 rpm -Power: 18.5 kW -Protection rating: IP55 -Hollow shaft: Ø 70 mm -Dimensions: 930/450/H660 mm -Weight: 410 kg

Condition: used, Year of construction: 2018, functionality: fully functional, Standard configuration: Control and operation: • Control system: HEIDENHAIN TNC 640 - Handwheel: HEIDENHAIN HR510 - Swiveling control panel with two 19" monitors - 3 potentiometers (feed rate, rapid traverse, speed) - 3-color status indicator light - HEIDENHAIN DCM; collision monitoring between the machine and the tool Standard configuration: Machine: Isdpfozzp Tasx Ap Dsbc - Travel range, X-axis = 1,000 mm - Travel range, Y-axis = 1,100 mm - Travel range, Z-axis = 810 mm - NC rotary table 1,000 x 800 mm with T-slots 18H7 / 100 mm, driven by a pre-loaded worm gear drive - Swivel range 1,350 mm - Direct measuring systems on all axes, manufactured by HEIDENHAIN, connected to the pneumatic system - Micro-Epsilon "Spindle Growth System" for detecting and dynamically compensating for thermally induced spindle growth - Full enclosure with a large angled door for crane loading and a quick-access door - View windows in the working area made of laminated safety glass - Coolant nozzle - Oil collection pan made of chrome steel sheet - Leveling elements - Machine paint: Blue and light gray Milling head: - Automatic horizontal/vertical swiveling milling head as a full-fledged, stepless NC axis from -1° to +90° - Speed: 16,000 min-1 - Main drive: 38 kW (100% duty cycle) - Torque: 105 / 135 / 155 Nm (100% / 40% / 25% duty cycle) - Tool holder: HSK 63-A Coolant supply: - Internal coolant supply: 30 bar, Form A, paper band filter and high-performance filter with integrated chip extraction system - Milling head external cooling via nozzle ring Tool changer: - Rack magazine with 85 positions - 5-position tool loading station - Dialog-based operating panel Chip removal: - Scraper conveyor for chip removal at the front along the machine bed, chip discharge height 1,100 mm Documentation: - Acceptance test report for circularity test, laser inspection - Technical documentation in duplicate - CE declaration of conformity Milling head: Compressed air through the spindle center The compressed air can be selected via an M-function. Internal coolant supply with paper band filter: - Internal coolant supply with 80 bar (Form A) with 20 l/min, incl. paper band filter, coolant nozzle, and additional fine filter, particle size minimal 40 µm. Pressure regulation for each tool via tool table or a switch on the control panel during operation. Measuring probe and tool measurement: - Radio measuring probe BLUM TC60 incl. software adaptation, fully set up, incl. KinematicsOpt and calibration sphere on magnetic stand - TRS2 tool breakage detection system non-contact. Only suitable for tools with a solid core from 2 mm, e.g. drills, tapping drills. Additional machine options: - Oil and emulsion mist extraction Mechanical air filter 1,800 m3/h suction capacity - DXF converter - HEIDENHAIN AFC "Adaptive Feed Control" adaptive feed rate control - HEIDENHAIN ACC "Active Chatter Control" active chatter suppression

Condition: used, Year of construction: 2008, control Siemens 840D Hobbing Machines for Large Gears Flexible and Versatile Gear Hobbing Gleason’s large hobbing machines offer maximum productivity for roughing and finishing operations on cylindrical gears for many industries: wind turbines, industrial gearboxes, mining, and shipbuilding, gear machining, and many more. The guideways are wide and feature hydraulically preloaded guides, which are used in combination with a separate linear guide and backlash- free rollers. This ensures precise slide movements with every feed. The design of the worktable ensures optimal conditions for absorbing and transferring cutting forces to the machine base. The use hydrostatic table bearings, combined with the proven backlash-free double-worm gear, guarantees precise table movements and the highest flatness and concentricity accuracies of the worktable. This holds true regardless of significant fluctuations in workpiece weight and/or high machining forces. The motorized gear hobbing heads for external and internal gear cutting are designed to meet the requirements of modern cutting tools. All machine sizes can be equipped with both external and internal gear hobbing heads. Ibedpfx Apjwzypne Dec The power range of the drive takes future tool developments into account. Naturally, the gear hobbing head drive is also backlash-free. These machines are particularly well-suited for use with state-of-the-art cutting materials. >> dry only, 1 chip conveyor, table diameter 1,870 mm

Condition: used, Manufacturer: Seydelmann Model: AG160B Year: 1999 Condition: Used Serial Number: 99463-1 Stock Number: 3432 Hole plate diameter: 160 mm Capacity: max 7000 kg/h Hopper: 400 litres Power: 3 x 400V, 50Hz, 42kW Dimensions: 2000 x 2750 x 2150 mm Weight: 1800 kg Feeding worm with 3 speeds, working worm with 2 speeds. Product temperature of maximum -10°C Hydraulic loading device for 200L tote bins. Ijdpozz Iyxjfx Ap Debc With safety guard over head and bayonet locking Including tool trolley.

Condition: ready for operation (used), Year of construction: 1996, filling capacity 400 Liter Usable Volume 300 Liter filling amount max. 850 kg workpiece sizes max. 850 x 200 mm Individual weight of workpiece max. 30 kg turning speeds 4.0 - 15.0 U/min Inner drum width 925 mm drive motor 380 V weight of the machine ca. 1950 kg. range L-W-H 3100 x 1600 x 2000 mm good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=xxnCddCmXe4 Description: - LIMA cleaning machines * for long concrete formwork parts, formwork clamps * for flame-cutting parts, plasma-cutting parts, laser-cutting parts * for punching and sawing parts - environmentally friendly, cost-saving, low-noise - drive with 5-fold V-belt via worm gear - maintenance-free spherical roller bearings - entire machine is highly soundproofed - dust extraction installed as standard - drum running time adjustable - speeds variably adjustable - the drum can be moved into any position using jog mode - space-saving thanks to compact design - extraction system built into the machine - single-lever drum quick release - machine bearings on vibration dampers - spacious unloading area, suitable for Euro standard containers - free access for forklifts or pallet trucks Working method: - the parts to be processed are moved by their own friction . deburred, descaled and derusted. - the closed design reduces the noise generated during deburring . to just 68 - 72 dB(A). - a direct-acting dust extraction system automatically removes . the dust generated during processing. - the machine can also process oily punched and sawn parts. - during this processing, additional sawdust is added to the drum. - a time delay switch switches the dust extraction system on individually. - the parts are thus deoiled and dried first. - only after this process does the dust extraction system switch on . automatically to suck the sawdust out of the drum. - by specifying the drum speed, optimal processing is guaranteed. - the LIMA-400 L deburring machine can be set up anywhere, . provided there is a solid surface/foundation. - after the work is complete, the drum remains in the position. . so that the drum flap can be opened quickly. - one work cycle takes about 20 minutes. Iodezcqzispfx Ap Djbc

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Grinding worm dimensions: Min./Max. outer diameter: 280/350 mm Width: 84/104 mm Max. pitch with limitations: MOD 8.0 (DP 3.2) Number of threads: up to 3 with limitations Max. usable width (shift distance): 90 mm Isdpfoyfnlkjx Ap Djbc For detailed technical information, please refer to the attached PDF file. Accessories: Several Fässler diamond wheels Dressing device Grinding stones Turbo separator

Condition: used, Year of construction: 1972, Technical details: grinding wheel diameter: 400 mm total power requirement: 3 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 1,5 x 1,4 x 1,3 m Dressing Grinder for gears REISHAUER AM max. width of grinding wheel 104 mm max. dia. of grinding wheel 400 mm max. module 7 Ibedpjwi Ni Tsfx Ap Dec min. module 0,5 pressure angle 10 - 30 ° grinding worm dia. 270 - 400 mm width of grinding worm 62/84/104 mm grinding worm turning speeds: at profiling 18/35/70 U/min electrics - voltage/frequency 380 / 50 V/Hz long. movement of crowning device 156 mm *

Condition: good (used), Peter Wolters AC500 lapping machine TECHNICAL DATA AND SCOPE OF SUPPLY TECHNICAL DATA Rolling device size: 42 TS 7/14 Working disk diameter: 415 mm Ring width: 54 mm Working disk thickness: 50 mm Possible wear of the disks to approx.: 20 mm Ibjdpfxjtxitvs Ap Doc Number of rotor disks: 14 Drive data: 380 V / 50 Hz Upper disk drive: 1.0 / 1.4 kW Worm gear motor: 56 / 112 rpm Lower disk drive: 1.0 / 1.4 kW Worm gear motor: 500 / 100 rpm Workpiece drive: 0.5 / 0.7 / 0.9 kW 3-pole worm gear motor: 6 / 18 / 36 rpm Tilt arm drive: 0.25 kW Digital load adjustment of the upper work disk: 0-250 daN Connection data Electrical connection: 5.0 kW Compressed air connection: 5-7 bar Compressed air consumption: Approx. 8 Nl/min OFFER SCOPE U.A: (list not exhaustive): Peter Wolters AC 500 lapping machine / fine grinding machine 1 inverter per motor documentation Exact scope of offer according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: used, Year of construction: 2005, Name: Sludge dewatering centrifuge used Manufacturer: Huber Type: RoD 1500 Year built: 2005 Driving force: 18,5 kW Throughput m³/h: 12 m3/h Permissible sediment density: 1,2 kg/dm³ Max. bowl speed: 4000 rpm Inner diameter drum: 365 mm Material: Stainless steel Dimensions: L 2800 x W 1000 x H 1100 mm Empty weight: 3000 kg Isdpfx Asy Edfbop Dobc Technical doc.: Yes Message: Immediate availability, Worm drive: Viscotherm Rododiff 10715, Hydraulics B/C 7.5 -16 Z HP Accessories: Control cabinet and a hydraulic system Condition: Second hand Price: On demand

Condition: used, Year of construction: 2001, overall weight: 10,000 kg, total length: 3,000 mm, total width: 2,300 mm, total height: 2,500 mm, REISHAUER RZ 362 A – CNC Gear Grinding Machine Year of Manufacture: 2001 Iedpszy Tkmsfx Ap Dobc Serial No.: 75523 Max. Workpiece Diameter: approx. 360 mm Max. Module: 7 Max. Gear Width: approx. 175 mm Max. Workpiece Weight: depending on configuration, approx. 60 kg Grinding Worm Diameter: approx. 270–350 mm Helix Angle: up to approx. ±45° CNC Control: Reishauer Connected Load according to Nameplate: 26 kVA Weight approx.: 10,000 kg Dimensions (LxWxH) approx.: 3000 x 2300 x 2500 mm Year of construction: 2,001 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: Loaded on truck under power: No

Year of construction: 2019, condition: ready for operation (used), A Frenco workshop gear testing device is available. Bed length: 590mm, min. center distance: 45mm, max. center distance with fine adjustment/without fine adjustment/without intermediate plate: 105mm/155mm/320mm, repeatability: 1.5µm, intermediate plate length: 210mm, max. worm diameter: 78mm, center distance (worm lengths): 0mm-220mm, measuring table dimensions X/Y/Z: 800mm/700mm/940mm. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 330kg. Documentation available. An on-site inspection is possible. Ijdpfx Apoy Ax The Dobc

Condition: used, mileage: 101,381 km, power: 107 kW (145.48 HP), first registration: 04/2013, fuel type: diesel, empty load weight: 2,915 kg, maximum load weight: 3,085 kg, overall weight: 6,000 kg, axle configuration: 4x4, wheelbase: 2,200 mm, brakes: other, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 1,770 mm, loading space width: 1,114 mm, loading space height: 380 mm, operating hours: 8,519 h, Equipment: ABS, additional headlights, all wheel drive, cabin, crane, differential lock, immobilizer system, onboard computer, power assisted steering, soot filter, trailer coupling, * German vehicle * One owner * Complete documentation with inspection reports available * 8,519 operating hours Ibodpfxoxxbqfj Ap Dec * The Kiefer Boki is in visually very good condition * Model: Kiefer Boki 1151B with COPMA loader crane mounted at the rear and folded * 4x4 all-wheel drive * Front lift with municipal hydraulics * Loader crane COPMA 35.3 with 3 hydraulic extensions * Lifting capacities: at 2.75 m = 995 kg, 3.11 m = 885 kg, 4.44 m = 600 kg, 5.77 m = 450 kg, 7.10 m = 355 kg, 8.45 m = 250 kg * Hook height: 10.5 meters * 5+6 control circuits * Rotary servo * Two clamshell buckets available at additional cost * 2 hydraulic outriggers * 3-way tipper * Body dimensions: L=1,770 mm x W=1,114 mm x H=380 mm * Trailer coupling * Towing capacity: 3,500 kg * Snow plow blade available at additional cost * Winter service lighting * 5-speed gearbox * Cab with 2 seats * Worm drive * Heated windshield * Joystick control * Rotating beacon lights * ABS * Differential lock * Leaf spring suspension * Wheelbase: 2,250 mm * Gross vehicle weight (GVW): 6,000 kg * Empty weight: 2,915 kg * Payload: 3,085 kg * In case of sale to traders or for export (both inside and outside the EU), German commercial code applies. If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, DGUV certification, safety inspection (SP), or UVV regulation inspection. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to avoid misunderstandings about their condition and suitability on the buyer's side. Viewings and inspections are possible at any time by appointment and are expressly desired. All information is provided without guarantee. No liability for errors or incorrect information is assumed. The buyer is obliged to independently verify the condition and features of the goods/vehicles. We reserve the right to change, prior sale, and errors.

Condition: excellent (used), 1 roller table 3.0 m long x 0.77 m wide with 7 support rollers, with pneumatic lifting/adjustment chain with worm gear and bellows cylinder, with a timber transfer roller carriage with rubber turntable for 1-man timber feed, with 2 lift-up stop rollers for planks from the band saw that have already been trimmed on one side. 1 roller table 3.5 m long x 0.77 m wide with 8 support rollers, with or without transfer roller carriage. Ibedpfx Apet E Nw Te Doc Original PAUL roller tables in various widths and lengths, available in standard or heavy-duty versions for use in front of cross-cut, trimming and re-cutting circular saws; short work tables allow, for example, the transfer of material from the cross conveyor, passage through the table assembly or the loading of heavy beams by forklift; long work tables are also available in various dimensions