Used Saw Motor for sale (27,028)

Condition: used, Veneer saw, veneer saw machine, jointing machine, fine cutting machine, fine cutting circular saw, Veneer saw drive motor -Veneer saw: SF Scheer drive motor EM 21 -Drive: 1.6 kW 2820 rpm Njdpfx Aoh Elztef Iewb -Dimensions: 265/270/H255 mm -Weight: 24 kg

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Nedpfxsdzp T Dj Af Iewb Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: reconditioned (used), 1 pair of flat motors well suited for pre-cutting circular saws in front of log band saw systems, one right-hand thread and one left-hand thread, for continuous power 5.5 kW, with new ball bearings, with steel brackets for mounting Nwedpfxsuqk Azj Af Isb

Condition: excellent (used), Circular saw flat motor KATT 11 kW / 1450 rpm, flange Ø 200 mm, right-hand thread, second stub shaft for hydraulic pump drive with pulley 150 mm Ø, tested and with new bearings. Nsdpeh D Rt Aefx Af Iewb

Condition: used, 900 band saw with 5 hp motor, used. Nwjdpfewtl S Ssx Af Isb

Condition: excellent (used), functionality: fully functional, Schorch electric motor 75 kW - 735 rpm. For direct frame saw drive. With reinforced bearings. Equipped with a 400 mm diameter pulley. Nwedpfx Asxvpqbof Isb

Condition: new, power capacity / kW volt / V ampere / A Njdoig A Ekspfx Af Iswb total power requirement 12,6 kW MOLL engine Type: Y2PE-160MA2B3 / ML1907010375 V: 400/690 A: 19.6 / 11.3 / 19.5 Speed: 2950 / 3540 Total power: 11kW / 12.6kW Condition: New

Condition: new, power capacity / kW volt / V ampere / A total power requirement 21,3 kW MOLL engine Type: Y2HE-180M4 PTC / MOLL130920373 V: 400/690 RPM: 1470 / 1764 Nwsdpfx Afouddlhs Ieb Total power: 18.5kW / 21.3kW Condition: New

Condition: new, power capacity / kW volt / V ampere / A total power requirement 42,5 kW MOLL-Motor Typ: Y2PE-200LB2B3 / ML2001011999 V: 400/690 A: 64,0 / 37,1 / 64,4 Nsdpfjif Sc Djx Af Iswb Rpm: 2970 / 3564

Condition: new, Year of construction: 2025, operating hours: 5 h, functionality: fully functional, fuel type: diesel, gearing type: automatic, number of seats: 1, operation weight: 2,000 kg, chain condition: 100 %, drive condition: 100 %, shovel volume: 0.025 m³, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, The HT20 PRO is a compact and powerful mini excavator in the 2.0-ton class, designed for professional applications in construction, landscaping, and municipal sectors. The machine stands out due to its robust build, precise hydraulics, and high operational reliability. The proven Kubota D902 3-cylinder diesel engine with 11.8 kW ensures smooth operation, low fuel consumption, and long service life. Thanks to its compact dimensions and adjustable undercarriage, the HT20 PRO is ideal for work on confined job sites. Technical Specifications: Engine: Kubota D902 3-cylinder diesel engine Engine power: 11.8 kW Low fuel consumption Very low vibration operation Hydraulics: Two-stage cast hydraulic pump Load-sensing hydraulic valve Drive motor with high/low speed Hydraulic hoses with steel wire reinforcement Work Equipment: Side-swing boom (left / right) Maximum digging depth: 1,995 mm Nwsdpfx Aex Hvvhjf Iob Maximum digging reach: 3,130 mm Maximum digging height: 2,875 mm Maximum dumping height: 1,930 mm Undercarriage: Adjustable undercarriage Reinforced undercarriage made of manganese steel Heavy-duty cast iron counterweights Rubber tracks with three layers of steel cord Track width: 200 mm Dimensions: Transport length: 2,650 mm Overall width: 970 – 1,270 mm (adjustable) Upper carriage width: 1,055 mm Overall height with ROPS canopy: 2,350 mm Track gauge: 770 – 1,070 mm Tail swing radius: 980 mm Minimum swing radius: 1,670 mm Gradeability: 30° Features: Fully enclosed cab Heating and air conditioning Excellent all-round visibility Ergonomic controls Joystick control LED work lights Comfort seat Reinforced steel construction Attachments / Implements (set includes): 20 cm trenching bucket with removable teeth 50 cm trenching bucket 100 cm grading bucket Hydraulic quick coupler incl. solenoid valves and hydraulic lines Optional: Hydraulic auger set up to Ø 300 mm (bits 150 / 200 / 300 mm + extensions) – SET PRICE 700€ RRP Maintenance & Warranty: Service intervals: every 250 operating hours or annually Warranty: 12 months across Europe Service & spare parts from stock in Rheda-Wiedenbrück (DE) Delivery & Availability: The excavator is available immediately and ready for operation. Europe-wide delivery can be arranged on request. This equipment complies with the highest safety standards and is CE certified. 2006/42/EC (Machinery Directive) 2014/30/EU (EMC Directive) 2011/65/EU (RoHS Directive) Interested? Contact us today! SET PRICE NET: €16,600 RRP Location: Rheda-Wiedenbrück

Condition: used, Electric motor, reversing motor, induction motor, reversible motor -Manufacturer: Sesame Motor Corp., Electric Motor Reversible Motor Nwedpfx Afsp Udipj Isb -Type: unfortunately without type designation -Speed: approx. 1480 rpm -Shaft: Ø 11 x 20 mm -Quantity: 3x motor available -Price per piece -Dimension: 150/90/H90 mm -Weight: 3.0 kg/pc.

Condition: used, servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control, converter, controller, servo module, stepper motor driver -Manufacturer: Oriental Motor, Controller Module with stepper motor driver -Controller modules: type CM 10-1 Nsdpfx Afsuuu E Us Iowb -Stepper motor driver: Type ARD-K -Delivery/Price: complete -Total dimensions: 90/55/H105 mm -Weight: 0.4 kg

Condition: used, Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, controller, converter, controller, servo module, stepper motor driver -Manufacturer: Oriental Motor, 2-phase stepping motor driver stepper motor driver unused original packaging Nwjdpfx Afjm Ui H Io Isb -Type: CSD2120-T -Dimensions cardboard: 140/90/H70 mm -Weight: 0.2 kg

Condition: used, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor -Manufacturer: Oriental Motor, Vexta Stepping Motor stepper motor unused original packaging -Type PK268-02B -Shaft: Ø 6 x 18 mm -Dimensions cardboard: 140/80/H70 mm Nwsdem Ui Idepfx Af Iob -Weight: 1.1 kg/pc.

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor -Manufacturer: Oriental Motor, Vexta servomotor stepper motor from Tiromat 3000/430 vacuum packaging system -Type PH268-E1.6-A1 -Shaft: Ø 6 x 20 mm -Number: 3x stepper motors available -Price: per piece -Dimensions: 97/57/H57 mm Nwjdjhwgdxepfx Af Ijb -Weight: 0.2 kg/pc.

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor Nwodpfxeq Dr Scs Af Ijb -Manufacturer: Oriental Motor, Vexta Stepping Motor stepper motor -Type C7219-9012K -Shaft: Ø 5 x 18 mm -Dimension: 67/42/H42 mm -Weight: 0.3 kg

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor, two-phase stepper motor Nedpfx Aoq Adpijf Iowb -Manufacturer: isert-electronic: two-phase stepper motor 1.8° -Gearbox: 3465 A2411-9212-A2 -Engine: Oriental engine type 2GK9K -Shaft: Ø 8 x 27 mm -Quantity: 6x stepper motor available -Price per piece -Dimension: 135/60/H60 mm -Weight: 0.9 kg/pc.

Condition: new, functionality: fully functional, power: 14.6 kW (19.85 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 2 l/h, fuel tank capacity: 20 l, color: orange, overall weight: 2,320 kg, operation weight: 2,200 kg, lifting height: 4,190 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.068 m³, suspension: other, Year of construction: 2025, operating hours: 5 h, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, The LT-25P is a compact, high-performance 2.5-ton mini excavator designed for professional use in construction, landscaping, as well as municipal and agricultural applications. Its robust build and advanced load-sensing hydraulics ensure efficient and precise operation even under demanding conditions. Thanks to the boom swing function, this machine is ideal for confined worksites and standard earthmoving or foundation tasks. Key Technical Features: - Boom swing for precise operation in tight spaces - Stable undercarriage (1,300 / 1,500 mm) providing excellent stability - Powerful Yanmar diesel engine - Load-sensing hydraulic valves for sensitive control - High-capacity axial piston pump - Hydraulic piston drive and swing motors - High digging and breakout forces - Durable rubber tracks Weights & Dimensions: - Operating weight: 2,200 kg - Operating weight with cabin: 2,320 kg - Bucket capacity: 0.068 m³ - Wheelbase: 1,500 mm - Track length: 1,940 mm - Ground clearance upper carriage: 220 mm - Counterweight swing radius: 670 mm - Undercarriage width: 1,300 / 1,500 mm - Track width: 230 mm - Track height: 50 mm - Transport length: 4,100 mm - Overall height: 2,440 mm Engine: - Model: Yanmar 3TNV80F - Displacement: 1.267 l - Engine power: 14.6 kW at 2,400 rpm (16.1 HP at 2,300 rpm) - Max. torque: 67.4 Nm at approx. 1,800 rpm - Engine oil capacity: 3.4 l - Fuel tank: 20 l Drive & Performance Data: - Travel speed: 2.0 – 3.8 km/h - Swing speed: 9.5 rpm - Max. gradeability: 30° - Max. drawbar pull: 23 kN - Ground pressure: 26.5 kPa Working Range: - Max. digging reach at ground level: 4,520 mm - Max. digging reach: 4,400 mm - Max. digging depth: 2,410 mm - Max. vertical digging depth: 1,930 mm - Max. dumping height: 4,190 mm - Max. dumping height: 2,880 mm - Min. turning radius: 2,130 mm - Bucket breakout force: 20 kN - Arm breakout force: 13.5 kN Dozer Blade: - Max. lift height: 260 mm - Max. lowering depth: 300 mm Undercarriage: - Track material: Rubber - Track model: 230 × 48 × 82 - Track tensioning system: Grease cylinder Hydraulic System: - Pump type: Axial piston pump - Flow rate: 67.2 l/min - Working pressure: 24.5 MPa - Hydraulic valves: Load sensing - Swing motor: Hydraulic piston motor - Travel motors: Hydraulic piston motors Equipment: - Boom swing - Fully enclosed cab with heating - Dozer blade - Joystick control - LED work lighting - Comfort seat - Rubber tracks - Hydraulic safety valves - Reinforced steel frame Accessories & Attachments – SET includes: - 25 cm trench bucket - 50 cm digging bucket - 100 cm grading bucket - Hydraulic quick coupler Optional: - Hydraulic quick coupler with tilt function – €1,400 RRP - Hydraulic auger set up to Ø 300 mm (augers 150 / 200 / 300 mm + extensions) – SET PRICE €650 RRP Maintenance & Warranty: - Service every 250 operating hours or annually - Warranty: 12 months Europe-wide - Service & spare parts available ex stock Rheda-Wiedenbrück (DE) Delivery & Availability: - Excavators available immediately - Europe-wide delivery can be arranged on request This machine meets the highest safety standards and is CE certified. - 2006/42/EC (Machinery Directive) - 2014/30/EU (EMC Directive) - 2011/65/EU (RoHS Directive) Interested? Contact us today! SET NET PRICE: €22,000 RRP Location: Rheda-Wiedenbrück Nedpfxex Hg Eto Af Iowb

Condition: new, functionality: fully functional, power: 11.8 kW (16.04 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 1.5 l/h, fuel tank capacity: 19 l, color: orange, overall weight: 1,800 kg, operation weight: 1,800 kg, lifting height: 3,570 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.04 m³, digging bucket width: 485 mm, Year of construction: 2026, operating hours: 5 h, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, The LT-20PRO is a modern, powerful, and versatile 2-ton mini excavator designed for continuous professional use in construction, civil engineering, and landscaping. Thanks to its robust steel construction, state-of-the-art load-sensing hydraulics, and compact dimensions, this machine is ideally suited for work in confined job sites as well as demanding earthmoving and foundation operations. The fully enclosed cab with integrated heating makes the LT-20PRO a true all-season machine, offering excellent operator comfort, safety, and productivity, even in cold, rainy, or windy conditions. Key Technical Features: - Swing boom for precise operation in tight spaces - Telescoping undercarriage 990–1,300 mm for maximum stability - Integrated travel motors with high/low speed - Load-sensing hydraulic valves – energy efficient & highly responsive - Axial piston pump with variable displacement - Slew drive with plunger-type rotation motor - Dual cast counterweights for superior stability - Wear-resistant rubber tracks 230×48×70 Weights & Dimensions: - Operating weight: 1,800 kg - Bucket capacity: 0.04 m³ - Wheelbase: 1,230 mm - Track length: 1,595 mm - Ground clearance (superstructure): 460 mm - Counterweight swing radius: 735 mm - Undercarriage width: 990 / 1,300 mm (telescopic) - Track width: 230 mm - Track height: 380 mm - Transport length: 3,600 mm - Overall height: 2,450 mm - Bucket width: 485 mm Engine: - Kubota D902-E4B-CBH-1 - Displacement: 0.898 l - Engine output: 11.8 kW at 2,300 rpm (16.1 hp) - Max. torque: 51.3 Nm at 1,800 rpm - Engine oil capacity: 3.7 l - Fuel tank: 19 l Travel & Performance Data: - Travel speed: 2.2 / 4.5 km/h - Slew speed: 9.5 rpm - Maximum gradeability: 30° - Maximum drawbar pull: 18 kN - Ground pressure: 29 kPa Working Range: - Max. digging reach at ground level: 3,840 mm - Max. digging reach: 3,910 mm - Max. digging depth: 2,270 mm - Max. digging height: 3,570 mm - Max. dumping height: 2,480 mm Dozer Blade: - Max. lift height: 280 mm - Max. lower depth: 190 mm Hydraulic System: - Pump type: Axial piston pump Nwjdpfxex Hg D Ao Af Ieb - Flow rate: 64 l/min - Operating pressure: 23 MPa - Hydraulic valves: Load sensing - Slew motor: Hydraulic piston motor - Travel motors: Hydraulic piston motors - Hydraulic oil tank: 17.5 l Equipment: - Fully enclosed cabin incl. heating - Joystick control - LED work lights - Comfort seat - Rubber tracks 230×48×70 - Dozer blade - Hydraulic safety valves - Reinforced steel construction - Dual cast counterweights Standard Attachments & Accessories – SET includes: - 25 cm trenching bucket - 50 cm trenching bucket - 100 cm grading bucket - Hydraulic quick coupler Optional: - Hydraulic quick coupler with tilt function – €1,400 RRP - Hydraulic auger set up to Ø 300 mm (augers 150 / 200 / 300 mm + extensions) – SET PRICE €650 Maintenance & Warranty: - Service intervals: every 250 operating hours or annually - Warranty: 12 months Europe-wide - Service & spare parts ex-stock Rheda-Wiedenbrück (DE) Delivery & Availability: The excavators are available immediately. Europe-wide delivery can be arranged on request. This machine meets the highest safety standards and is CE certified. - 2006/42/EC (Machinery Directive) - 2014/30/EU (EMC Directive) - 2011/65/EU (RoHS Directive) Interested? Contact us today! SET NET PRICE: €20,500 RRP Location: Rheda-Wiedenbrück

Condition: new, functionality: fully functional, power: 14 kW (19.03 HP), gearing type: automatic, fuel type: diesel, color: orange, operation weight: 2,500 kg, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.07 m³, Year of construction: 2025, operating hours: 5 h, Equipment: air conditioning, cabin, hydraulics, parking heater, quick-change device, steel tracks, The HT25PRO is a powerful, premium-class mini excavator in the 2.5 t category, specifically designed for professional and demanding applications. As a larger and more robust version of the HT20, it offers increased performance, reach, stability, and productivity. Equipped with an original Kubota diesel engine, load-sensing hydraulics, and a reinforced manganese steel frame, the HT25PRO is ideal for civil engineering, landscaping, municipal use, and agricultural operations. Technical Specifications: Engine: Kubota D1105 3-cylinder diesel engine Power: 14 kW rated (continuous operation), up to 18.4 kW peak output (no switchable power stages) Very low vibrations Fuel efficient Designed for continuous operation Hydraulics: Load-sensing hydraulic pump Load-sensing multi-way hydraulic valve Hydraulic pump pressure: 25 MPa System pressure: 22 MPa Hydraulic flow rate: 61.6 l/min Travel motor with high/low speed (Japan Standard) High-quality, heavy-duty hydraulic lines Dimensions & Weight: Length × width × height: 345 × 143 × 250 cm Chassis width: 140 cm Operating weight: 2,500 kg Working Range: Boom swing left/right Swing function Maximum digging depth: 2,370 mm Digging/dumping height: 3,500 mm Undercarriage & Superstructure: Manganese steel undercarriage with high torsional rigidity Extendable / telescopic undercarriage Laser-cut, high-precision steel components Heavy-duty cast iron counterweight Features: Steel tracks (very robust, professional use) Fully enclosed cabin Heating and air conditioning Excellent all-round visibility Ergonomic controls Joystick operation LED work lights Comfort seat Reinforced steel structure Accessories / Attachments (included as a set): 25 cm trenching bucket with removable teeth 50 cm trenching bucket 100 cm grading bucket Hydraulic quick coupler including solenoid valves and oil lines Optional: Hydraulic auger set up to Ø 300 mm (Auger sizes 150 / 200 / 300 mm + extensions) – SET PRICE €850 RRP Maintenance & Warranty: Service intervals: every 250 operating hours or annually Warranty: 12 months Europe-wide Service & spare parts available from stock in Rheda-Wiedenbrück (DE) Delivery & Availability: The excavator is available immediately and ready for use Europe-wide delivery can be arranged on request This machine meets the highest safety standards and is CE-certified: 2006/42/EC (Machinery Directive) 2014/30/EU (EMC Directive) Nwsdpfx Aox Hhu Nef Ijb 2011/65/EU (RoHS Directive) Interested? Contact us today! SET NET PRICE: €23,500 RRP Location: Rheda-Wiedenbrück

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor -Motor comes from a Weisser Heilbronn Type 29 CNC lathe -Speed: 2000 rpm -Power: kW -Design: B5 -Shaft diameter: Ø 30 mm -Quantity: 1 piece available Nwjdpfx Aeff Aqzof Ijb -Dimensions: -Weight: 20 kg

Condition: used, Year of construction: 1999, Electric motor, year approx. 1999 Nwedpfxsxu Ewne Af Isb

Condition: used, Electric motors Njdpfx Afsxfvzre Iewb

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 11 kW 660 V -Price: per piece -Quantity: 180 pieces available Nodpfxjb A N Alj Af Iewb -Weight: 0.5 kg

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 30 kW 660 V -Price: per piece -Quantity: 17 pieces available -Weight: 2 kg Nsdpeb A N Akjfx Af Ijwb