Circular saw flat motors 5,5 kW + 11 kW

PERSKE + KATT

Condition: used, Year of construction: 2025, operating hours: 2 h, Operating hours: 2 New tractor with dealer daily registration prior to delivery Standard equipment / technical data Engine Rated power (ISO): 82 / 110 kW/hp at 2200 rpm Maximum power: 86 / 115 kW/hp at 2000 rpm Maximum torque: 460 Nm at 1600 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4-cylinder / 4.4 l, 4 valves, STAGE 5 Regulated turbocharger, SCR catalytic converter DOC – Diesel oxidation catalyst SC soot particle filter One-piece, tiltable engine hood Exhaust on right side, in front of cab Fuel tank capacity: 198 liters / AdBlue: 18 liters Transmission / PTO 16/16-Speed Dyna-4, SpeedMatching, 40 km/h PowerControl left-hand operation with powershift reverser, 4-step powershift Permanently cooled wet multi-plate clutches with independent lubrication system Dual-speed PTO: 540 / 540E / 1000 rpm Electronic shift in cab PTO START/STOP button on left rear fender Hydraulics / Rear linkage Open Center system, 58 l/min total flow, max. 200 bar 2 control valves with hydraulic couplers: 1x single/double-acting, pressure relief + 1x single/double-acting, neutral leak, SST Category 3 quick coupler with balls and catcher bowls CAT 3/2 Dsdpfx Asyvmq Ijffekk Lower link draft control 5,200 daN maximum lift force, 2 external lift cylinders Adjustable lift rods on both sides and 2 side stabilizers EHR with external operation on both rear fenders Electrical equipment Thermostart, 120 A alternator Electric battery isolation switch 12 Volt power supply for external devices with socket Axles / Additional weights Rear axle ND with flange hub Oil-cooled disc brakes Height-adjustable automatic drawbar Rear fender outer width 2.00 m, without extensions Front weight carrier with integrated drawbar and towing pin Driver's station Standard cab with vibration damping, standard roof, ventilation and heating, air conditioning Integrated safety frame with tinted glass Doors on both sides with safety steps Adjustable steering column (height & tilt) Air-suspended driver's seat with armrests, swivel adapter, and seat belt 2 large telescopic exterior and wide-angle mirrors Interior mirror Analog-digital dashboard (SIS) Radio pre-wiring with antenna and speakers 4 work lights each at the front and rear of the cab roof 2 headlamps each in the engine hood and on the handrails, 2 work lights on rear fenders Rear window washer/wiper All-wheel front axle with selectable differential lock Special equipment With fuel tank protection PowerControl & brake to neutral (clutch effect) 100 l/min Open Center hydraulic system oil flow sharing (58+42 l/min) Leak oil collector at quick couplers 3 control valves: 1x pressure relief, double-acting, float, SST + 1x double-acting, neutral leak, SST + 1x double-acting, neutral leak, SST + free return 2.5 t front linkage, 1 hydraulic hose set, electrical socket 480/70R38 ADJ Ø1.69m & 380/70R28 ADJ Wide rear fender extensions Air conditioning Cab with mechanical suspension Telescopic exterior and wide-angle mirrors Passenger/instructor seat with belt Air-suspended driver's seat, automatic setting with seat belt, swivel adapter, and armrests Rear window washer/wiper Automatic battery isolation switch, 12

Condition: good (used), Three-phase motor, electric motor -Power: 5.5/8/22 kW -Speed: 740/975/1475 rpm Dodpfx Aed E Tfneffokk -Shaft: Ø 55 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 750/510/H390 mm -Weight: 275 kg

Condition: new, Year of construction: 2025, Cardboard Core winder maschine for Toilet Tissue paper rolls Specifications • Carton web width 60 - 76 mm • Production speed 35 - 40 m / min Dkedpfxjit N Rvj Affok • Core i. diameter 40 mm - 80mm • No. of plies 2 , 3, 4 plies. (more optional) • Cut off length 600-2900 mm Features • Operation with either hot or cold glue. • Exchangeable mandrels. (for different core size) • Crush cutting by two or three circular cutters with synchronized movement. • Variable speed – electronic. (three phase)

Condition: used, functionality: fully functional, F 90 panel saw, non-tilting, table extension, table length approx. 3000 mm top extraction, sliding carriage length 3000 mm, scorer, Dksdpfxoyaq Aho Affjk 1000 mm to the right of the blade, saw blade diameter 400 mm, max. cutting height 130 mm weight 900 kg Price ex-works Transport available at extra cost!

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, 4 spindle speeds: 3000/4500/6000/9000 rpm. Right-/left-hand rotation Control panel on top Table extensions and pull-out table support Motor 4.7/5.7 kW Dkjdpfx Aoxwxrqeffjk Spindle diameter 30 mm Weight approx. 1000 kg With feed unit WEGOMA VS 34, 3 rollers Tenoning table for cross machining

Condition: used, table surface area 170 x 170 mm base plate surface area 170 x 170 mm throat 185 mm quill stroke 65 mm spindle turning speed range 500 / 896 / 1473 / 2428 U/min column diameter 65 mm total power requirement 0,37 kW Dksdpsvh Nbbofx Affjk

Condition: new, range L-W-H 960 x 460 x 860 mm weight 75 kg 7 St. Tool Trolley – 8 Drawers – Partially Equipped (6 Drawers) High-quality workshop trolley with 8 ball-bearing drawers, 6 of which are fully equipped with tools. The trolley is lockable and equipped with 4 sturdy casters (2 swivel, 2 lockable) for comfortable and safe operation. A robust polypropylene worktop completes the set. Features & Quality: – Ball-bearing, extendable drawers – Central locking mechanism / lockable – 4 casters (2 swivel, 2 lockable) – Tools made of chrome vanadium steel – Tools neatly stored in foam inserts Drawer 1 Ratchet and socket sets 1/4", 3/8", and 1/2", including ratchets, universal joints, extensions, and short and long sockets (approx. 4–30 mm). Drawer 2 Extensive ratchet accessories: Torx (with/without bore), Allen, slotted, Phillips (PH/PZ), spline, Ribe, and five-point – for 1/4", 3/8", and 1/2". Drawer 3 Open-end/ratchet wrench set (approx. 8–22 mm), double box-end wrench set, and torque wrench. Drawer 4 Precision, slotted, Phillips, and Torx screwdrivers in various sizes, including soft-grip versions. Drawer 5 T-handle hex/Allen key set with ball end and T-handle Torx set (T10–T40). Drawer 6 Djdpju Img Ssfx Affokk Pliers and hand tool set: circlip pliers (internal/external), combination and needle-nose pliers, side cutters, pipe wrench, claw hammer, and center punch set.

Condition: excellent (used), HA 4 surface planer planing width 450 mm total table length 2500 mm Feed table 1500 mm Machine height 820 mm Max. Chip thickness 15 mm Dkodsinkfnspfx Affok Cutter shaft revolutions 4800 rpm Motor power 4 HP Weight 660 kg 3-piece cutterhead

Condition: new, VKM supplies spare parts for Oswald and some Bezner-Oswald machine, BÖGLI bandsaws and replacement knives for various woodworking machines. Partly the parts can be delivered from stock. For the knives, send us your desired dimension and we can offer and supply them to you at a reasonable price. Dkjdpfx Aog Rn Avoffjk Send us your inquiry today!

Condition: excellent (used), Year of construction: 1982, Table saw ULMIA 1710s Year of construction 1982 Tilting angle 45° Cutting length on cart 750mm Blade diameter max 250mm. Dodpfxoufgnzo Affskk Cutting height 75mm. Cutting width between the saw and the attachment 650 mm Scale carriage for cutting angles Table size 1000x630mm