Overband magnet Block magnet Magnetic plate

mütek Hawk-Eye

Year of construction: 2026, condition: new, *Only the neodymium overbelt magnet is offered, not the conveyor belt underneath. *Neodymium magnets are among the strongest magnets in the world. They have an extreme pulling power and cannot be compared to ferrite magnets. Extremely high degree of separation, depending on the bulk height and the starting material. Probably the most compact overband magnet on the market. The competition often uses the less powerful ferrite magnets to save costs. dimensions approx. Length: 104cm Width: 22cm Height: 28 cm (at the motor) *Without controller Surcharge for simple manual start/stop control + 495 € A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600x68x36.5 mm * So nails are attracted to a length of 600 mm and thrown off to the side, in the area that is no longer magnetic. This overbelt magnet should be mounted approx. 5 - 9 cm above the material flow. *Assembly/suspension on site Ideal for separating nails from wood chips. Optionally also in a single-shaft shredder that is sucked off Requirements: *Your belt width or useful width inside (of the existing conveyor belt) should ideally be narrower than 55 cm *Suitable for separating nails from material flows that are less than 12 mm high and with a chip length of less than 25 mm. Dujdodubpuepfx Afnon ----- Optional at extra charge: Cross and ascending belt demonstrators from € 7,995 net

Year of construction: 2021, condition: new, Complete solution for the transport of bulk materials and demetalization of magnetic metal contaminants. Aluminum ascending conveyor belt including substructure Incline start area level ground (adjustable) Discharge height 1800mm (adjustable) Construction: height adjustable Construction for suspending the overband magnetic separator DMPM1200 included Conveyor belt width 500mm (adjustable) We deliver our conveyor belts in PVC, PU or rubber. PVC conveyor belt including carrier and corrugated edge Drive: Motor 0.25KW (adjustable), speed 0.3m / sec Connection 220 / 240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Wave edge: 40x35mm Duodpfxohh A Iye Afnon T-20 studs - 400mm pitch 2-ply particularly cross-stable Our core competence lies in delivering exactly what the customer really needs. We work together with our customers to develop customer-specific, individual solutions and deliver corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyors, magnetic separators, overbelt magnetic separators, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnets, magnetic belt separators, lifting magnets, filter rods, magnetic grids, magnetic grids, metal separators, block magnets, filter systems

Condition: new, Year of construction: 2026, Diameter: 160mm Also available in the diameters: 180, 200, 250, 300 mm for an additional charge, other diameters on request. Very stable industrial design. Dusdpjchuvrjfx Afnon Ideal for separating nails/metal parts from material flows. For example after a wood shredder. including 3 extremely powerful magnets * If desired, up to 6 magnets can be installed in the component - surcharge for each additional magnet + 49 € - Neodymium magnets are also available instead of ferrite for an additional charge Your advantages: + Extremely large inspection door with seal for easy stripping of the nails + Stable quick-release fastener +Made in Germany Inspection door / opening: 35x18 cm Installation length may vary

Year of construction: 2019, condition: refurbished (used), Overband plate magnet Version in VA 1.4301 tightly welded 420 x 250 x 100mm completely welded housing Ring eyelets for suspension Djdpfed Dzahex Afnjun

Year of construction: 1979, condition: ready for operation (used), A Gebr. Pfeiffer ball mill is available. Drive power: 330kW, diameter: 2400mm, length: 5000mm, number of motors: 2, motor weight: 180kg, flywheel width: 3.2mm. On-site inspection is possible. Djdpfxev Dwirj Afnjun

Condition: good (used), Year of construction: 1993, Vecoplan drum chipper VTH 75 / 22 / 5. Infeed dimensions: width 750 mm, height 220 mm. Motor: 75 kW. Duedexr Tp Hopfx Afnjn

Condition: used, functionality: fully functional, 2-shaft compulsory mixer Working dimensions approx. 900 x 3,500 mm Electric drive with 132 kW motor and gearbox on a semi-mobile steel structure with new control panel Dedpfxetrmvfe Afnsun

Condition: new, Year of construction: 2024, MONOBLADE EDGER lenht of cut from 4,2 to 8,2 mt max depth of cut 160 mm Dedpsfw Nv Refx Afnsun parallel guide hopper

Condition: good (used), Year of construction: 2014, Pellet Press Manufacturer - TEKNO UNO Model - TK 304 Dedpevdrtxofx Afnoun Year - 2014 Motor Power - 50 kw Capacity - 450 kg/h

Condition: new, Year of construction: 2026, Size: 5 Nominal heat output: 145kW -- BImSchV stage 2 and CE conform-- combustion chamber completely fireclayed For rooms of: 3.800 m³ (according to DIN) Duedpfx Afedlhcrsnsn Fuel: logs, chipboard, chips, chip briquettes fuel consumption: 35 - 40 kg/h Blower air capacity, free blowing: 9.400 m³/hour Blow-out opening: Ø 700 mm Flue pipe connection Ø 220 mm Weight: 1.950 kg SPS control cabinet: 380 Volt