Used Circular Saw Motor for sale (26,706)

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment Isdpfx Abodzp T Do Tetc - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: excellent (used), Circular saw flat motor KATT 11 kW / 1450 rpm, flange Ø 200 mm, right-hand thread, second stub shaft for hydraulic pump drive with pulley 150 mm Ø, tested and with new bearings. Itodpeh D Rt Aofx Ab Tjc

Condition: reconditioned (used), 1 pair of flat motors well suited for pre-cutting circular saws in front of log band saw systems, one right-hand thread and one left-hand thread, for continuous power 5.5 kW, with new ball bearings, with steel brackets for mounting Isdpfxsuqk Aze Ab Tjtc

Condition: new, Table size: 420 x 450 mm Table height: 215 mm Table swivels up to: 45 Saw or cutting blade Ø: 200 mm here cutting depth: 47 mm electrical connection: alternating current 230 V Iodpfxsc Snvfe Ab Tstc weight: 14,5 kg

Condition: used, Year of construction: 2004, saw blade diameter 450 mm cutting diameter 150 mm turning speeds 6 / 12 / 24 / 48 U/min capacity 90 degrees: flat 240 x 70 mm capacity 60 degrees: flat 170 x 70 mm capacity 30 degrees: flat 120 x 70 mm capacity 90 degrees: round 150 mm capacity 60 degrees: round 145 mm capacity 30 degrees: round 120 mm capacity 90 degrees: square 140 x 140 mm capacity 60 degrees: square 125 x 125 mm 100 x 100 mm total power requirement 3,6 kW weight of the machine ca. 1150 kg dimensions 1450 x 1610 x 1900 mm Itodpfx Abeyk E U Hs Tjc Semi-automatic mitre saw Equipment: - miter 30° / 60° / 90° - digital display - roller conveyor - Hydraulic clamping - Hydraulic saw blade feed

Condition: new, Year of construction: 2023, Capacity Ø 15 - 100 mm Itedpfxjyk Ihve Ab Toc sawing motor 11 kW saw speed 30-130 U / min hydraulic motor 2,2 kW Saw Feeding Servo 1,5 KW Siemens Material Feeding Motor 1,5 KW Siemens saw-blade dia. Ø360 x T2.6 x 2.25 x 40 mm cutting range min. 3000 mm cutting range max. 7000 mm control Siemens hydraulic Rexroth Valve coolant Pulverisiertes Schneidöl required space 2900 x 7400 m weight of the machine ca. 4900 kg GERD WOLFF GLS-160 High-performance circular saw From 10 to 250 Millimeters round material, within seconds, they cut steal of all kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine german with turkish mechanical engineering.

Condition: ready for operation (used), Only 2700 hours with protective device Itjdpfxeykmy De Ab Tjc

Condition: used, Year of construction: 1992, Used machine Year of manufacture: 1992 Equipment and technical data: - Swivels both sides up to 45° - Saw blade tiltable to one side up to 45° for vertical mitre cuts - Motor: 2 kW, 400 volt, 2800 rpm - Saw blade diameter: 300 mm - Extraction connection diameter: 75 mm - Cross cuts: 380 x 85 mm - Mitre cuts, saw blade vertical, 45° swivel to left or right: 265 x 85 mm - Mitre cuts, vertical, saw blade tilted 45° to the left: 380 x 60 mm Iedpfxoykvw Ss Ab Tjtc Availability: short notice Location: 63934 Röllbach

Condition: new, functionality: fully functional, For sale: New JET Table Saw JTS-600XL Clearance – B-Stock machines with cosmetic defects at a special price! Entry-level machine with precision-ground cast iron table and sliding table for accurate cuts. Saw unit is tiltable! Precision-ground cast iron table – The solid table made of high-quality cast iron provides a flat working surface and enables precise cuts. Sliding table – Manufactured from anodized aluminum extrusion profile (1,600 mm). Robust parallel fence – Features an integrated fine adjustment mechanism and round-rod guide, making the parallel fence an indispensable aid. User-friendly operation – Large cast iron handwheels ensure effortless adjustments. Extension table for added flexibility – Measuring 460 × 600 mm with a telescopic crosscut fence extendable up to 2,200 mm, the extension table accommodates large workpieces. Technical Specifications: Motor: 230 V / 1.5 kW Blade speed: 4000 rpm Blade diameter / bore: 250 / 30 mm Saw blade tilt: 0° – 45° Max. cutting depth at 0°: 80 mm Max. cutting depth at 45°: 54 mm Max. cutting width at rip fence: 610 mm Table dimensions: 800 x 350 mm Table extension: 415 x 350 mm Right table extension: 800 x 270 mm Precision sliding table: 1600 x 255 mm Max. cutting length: 1600 mm Overall dimensions: 1650 x 2200 x 1100 mm Weight: 157 kg Scope of Delivery: Sliding table 1600 x 255 mm Saw blade Ø 254 x 30 x 3 mm – 36 teeth (carbide tipped) Parallel fence Extension table 460 x 600 mm with telescopic crosscut fence 2200 mm Dust extraction port Ø 100 mm Shipping: Freight shipping: Austria: €70 incl. VAT Germany: €90 incl. VAT South Tyrol: €130 incl. VAT For freight shipping, you will be contacted by the carrier by phone one business day prior to delivery. The delivery time will be coordinated, and you can inform the carrier of any special requirements (access/limitations). Delivery is made to curbside or driveway by tail lift. Pickup of your order is possible at our KUCHL and SÖDING locations. After your order is received, we will check the earliest possible pickup time and contact you. The machine can be inspected during our business hours at any time. Subject to prior sale! Iedpfxsyk Abws Ab Tetc Related terms: circular saw, table saw, saws, panel saw

Condition: good (used), Year of construction: 1999, saw blade diameter 450 mm cutting diameter 150 mm saw blade diameter möglich: 400 + 370 mm Saw blade 50 mm saw blade feed stepless ca. 0 - 1000 mm/min rapid return speed 3300 mm/min table rotating + / - 90 Grad cutting speed 7 - 43 m/min total power requirement 4 kW weight of the machine ca. 1050 kg Overall size 1020 x 1350 x 2000 mm Iedpfx Absxqrdms Tstc Semi-automatic cold circular saw, made by Kaltenbach, type KKS450H, with Siemens S7 PLC control for cutting speed and sawing height, feed roller conveyor, discharge roller conveyors with hand crank, remote control and digital display. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Year of construction: 1983, machine/vehicle number: 3601, Saw blade diameter: 300 mm Ijdpoyh Hn Hefx Ab Totc Saw blade speed: 2800 rpm Cutting capacity at 90°: 70 x 120 or 50 x 140 mm Mitre stops left and right: 15/22.5/30/45°, any intermediate position lockable Drive motor: 380 V, 2.2 kW Weight: 50 kg

Condition: ready for operation (used), Capaciteit slang: max. 2 inch / 50 mm De slang wordt via een rupsbandsysteem in de machine gevoerd en aangestuurd door een elektromotor De invoersnelheid is instelbaar van 0 tot 40 m/min De afstand tussen de banden op het rupsbandensysteem wordt handmatig ingesteld met een handwiel dat is uitgerust met een digitale teller Ijdpjygywhsfx Ab Tetc Capaciteit: 500 programma's Eén programma omvat: de onderdeellengte, het aantal onderdelen, de verlengingsregelaar, de loopsnelheid van de slang, de naam van de slang, het programmanummer en de diameter van de slang De slang wordt gesneden met een speciale gekartelde schijf: 520x4x40mm 9 kW spindelmotor met rem Rotatiesnelheid: 3000 tpm Tijdens het snijden houden twee scharnierende kaken, handmatig verstelbaar door een wiel, de slang vast en geleiden deze Het buigen van de slang en het voortbewegen van de snijkop worden uitgevoerd door twee pneumatische cilinders Luchttoevoer: 6 bar Afmetingen H x B x L: 1300 x 1300 x 1350 mm Gewicht: 580 kg

Condition: ready for operation (used), empty load weight: 900 kg, semi-automatic with hydraulic clamping same as Kaltenbach type KKS Dia saw / abrasive - disk: 425 mm Max dia workpiece at 90°: dia 140 mm Max dia workpiece at 45°: dia 140 mm Max dimensions workpiece at 90°: 300 x 60 mm / 140 x 140 mm Itsdpfx Abeygyx Sj Tsc Turningspeeds: 13 + 26 m/min Power needed / motorpower: 2,9 kW Angle-input system (mitre)(number+°): R : 60° - L : 90°

Condition: excellent (used), Year of construction: 1982, Table saw ULMIA 1710s Isdpeufgnzsfx Ab Totc Year of construction 1982 Tilting angle 45° Cutting length on cart 750mm Blade diameter max 250mm. Cutting height 75mm. Cutting width between the saw and the attachment 650 mm Scale carriage for cutting angles Table size 1000x630mm

Condition: used, Cutting width: approx. 700 mm Cutting length: approx. 5,200 mm Iodpjx D U Sajfx Ab Tstc Longitudinal circular saw Jrion type HMS for precise rip cuts in solid wood, panel material, and wood-based composites. Availability upon agreement from February 2026.

Condition: used, Year of construction: 2015, saw blade diameter 350 mm Cutting capacity 90° (rectangle) 100 x 90 mm Cutting capacity 90° (square) 90 x 90 mm Cutting capacity 90° (round) Ø 95 mm Cutting capacity 45° (rectangle) 75 x 80 mm Cutting capacity 45° (square) 75 x 75 mm Cutting capacity 45° (round) Ø 90 mm spindle turning speed range 38/19 U/min power capacity 1,5 / 0,75 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Itodjygx Dyjpfx Ab Tjc Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2001, Technical details: Itedpfxowvbk Ao Ab Toc saw blade diameter: 250/285 mm cutting diameter: 50-70 mm total power requirement: 5,5 kW weight of the machine ca.: 1 t Saw type: circular saws Cutting direction: straight cut Automation: automatic Material type: structural steels, stainless steels, tool steels Material width: 60 mm Material height: 70 mm *

Condition: excellent (used), length ca. 3.200 mm width ca. 1.400 mm height ca, 1.600 mm Motors 2 table - swivable Ja Itedjxwbpfspfx Ab Tjc The stable Bäuerle KFL combined woodworking machine combines a sliding table saw, slot drilling machine, and table router with feed in one machine and comes with a wide range of accessories. Roller table: yes

Condition: used, Motor: 3 kW Triple combination table saw, slot mortiser, and milling machine Kirchner Leipzig. Itodpswzbcvofx Ab Toc Without milling arbor.

Condition: used, Saw blade ø: max. approx. 300 mm 1200064 Trennjäger sharpening machine for grinding small circular saw blades. Itodpfsulfftsx Ab Tec

Condition: used, Kölle Formatic Panel Saw - Year of manufacture: 1997 - 5.5 kW motor - 400 Volt - Weight: 1050 kg - Overhead control panel - 4 speeds - Electric lifting, lowering & tilting - Digital display for fence - Cutting width 1 m right of the blade - Brake motor - 2800 mm - Cutting height 145 mm without scorer Itedpfjx Ha Rvox Ab Tjc

Year of construction: 1998, condition: ready for operation (used), Feed rate: 50-1000 mm/min, operating voltage: 3x 400 V, control voltage: 24 V, rated current: 12 A. On-site viewing is possible. Ijdpfx Abeyln A Ns Totc

Condition: excellent (used), Catalogue number 7887 TECHNICAL DATA - Max. saw blade diameter: 350mm Iedjyg Il Tepfx Ab Totc - Saw blade bore diameter: 30mm - Max. cutting height: 100mm - Main blade adjustable up/down and at an angle - Saw blade guard - With side trolley - Cutting length on trolley: 920mm - Cutting width with fence: 600mm - Main motor: 4kW - Table dimensions: 102x900mm - Mitre gauge - Extraction port diameter: 110mm - Dimensions (LxWxH): 2110x1370x1000mm - Weight: 550kg ADVANTAGES – Made in Poland – With side trolley – Mitre gauge – Used saw, very good condition Net price: 7,900 PLN Net price: 1,880 EUR (exchange rate 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: excellent (used), For sale is a used Panhans V91 Twin II panel saw with a cutting length of 3200 mm. The machine is in very good condition and has been inspected by our qualified personnel. Technical specifications: - Double tilting saw unit - Cutting length: 3200 mm - Cutting width: 1250 mm - Cutting height: 173 mm - Max. saw blade diameter: 500 mm - Overhead control panel - Angle scale with length compensation - Motor power: 7.5 kW - Year of manufacture: 2012 Itodpfx Abowza N Ue Tec The panel saw is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Info Tel. 06244-20299 Related terms: saw, circular saw, panel saw, format Reference: R-S24F9

Condition: used, Technical details: Saw blade diameter: 400 mm cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Itjdpfx Abju Niuzo Tsc Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Without coolant system *