Used Circular Saw Motor for sale (27,994)

Condition: ready for operation (used), Eisele VMS 350 Saw, Metal Circular Saw, Circular Saw Maximum cutting cross-section, round at 90°: 120 mm Maximum cutting cross-section, rectangular at 90°: 170 x 100 mm Maximum cutting cross-section, round at 45°: 120 mm Maximum cutting cross-section, rectangular at 45°: 120 x 100 mm Gsdpfsz Il Evsx An Ejui Saw blade diameter: 350 mm Saw blade width: 3 mm Swiveling: 45-90-45-30° Rotational speed: 17 RPM; 34 RPM You are welcome to visit us for a viewing. We can gladly arrange cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be prepared. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the article may occur and are subject to change.

Condition: used, Miter saw for aluminum, EISELE, Type LMS II HVG-225 Machine no. 0107, year of manufacture 1980 Cutting range: 90° = 150 x 100 mm 45° = 120 x 100 mm Saw blade diameter: max. 400 mm Miter cut: +/- 45° Saw blade speed: 1700 / 3400 rpm Motor power: 1.4 / 1.9 kW Power supply: 380 volts, 50 Hz Table size in front of the stop angle: 580 x 350 mm - Motor type RF 1.5 / 4 / 2-7 - Saw unit for shifting cut, tiltable 45° to the left Gsdpfx Anjzinzro Eeui - Machine equipped with a saw blade for aluminum, Ø 400 mm - Hose connection for chip extraction, Ø 80 mm - Sturdy metal base Space requirement (L x W x H): 1050 x 1020 x 1700 mm Weight: 150 kg In good condition

Condition: used, Year of construction: 2009, machine/vehicle number: 10000850, Item No. 21166 Hydro-pneumatic metal circular sawing machine Technical data: - Saw blade diameter up to 350 mm - Saw blade feed, continuously adjustable, hydro-pneumatic Gujdozzpp Ispfx An Eji - Maximum opening width of the pneumatic vise 205 mm - Cutting range: - with saw blade diameter 350 mm - at 90°: - round 120 mm - square 110 mm - flat up to 200 x 90 mm - or 140 x 110 mm - at 45°: - round 100 mm - flat 100 x 100 mm - Miter adjustable: - left up to 45° - right up to 45° - 30° - 4 saw blade speeds 10 + 20 + 40 + 80 1/min - Drive 400 V / 1.4 / 1.9 kW - Air connection 6 - 8 bar - Micro-spray cooling system - Discharge conveyor with stop 4000 mm - Infeed conveyor 2000 mm - Space requirement approx. W 850 x H 1750 x D 950 mm - Weight approx. 400 kg

Condition: new, saw blade diameter: 400 mm, input voltage: 400 V, Equipment: documentation/manual, - Saw blade, Ø 400 mm - Double miter - Compound miter - 4 pneumatic clamping devices - Minimum quantity lubrication system - Compressed air gun - Protective cover - Documentation Gjdpfxsz D Niqj An Ejui - 400V

Condition: ready for operation (used), Year of construction: 2014, saw blade diameter 350 x Ø 32.0 mm capacity degrees: flat 175 x 75 mm capacity degrees: square 110 x 110 mm capacity degrees: flat 100 x 80 mm Gsdpfx Asyu U Dfjn Esui capacity degrees: square 85 x 85 mm turning speeds 3000 U/min total power requirement 1.5 kW weight of the machine ca. 180 kg dimensions of the machine ca. 870 x 710 x 1435 mm Equipment : - semi-automatic circular saw for cutting PVC and aluminum profiles - two-hand safety operation - Miter adjustment : * left * right 0 / / - Large protective hood, covers entire working area - Saw blade - 2x vertical pneumatic clamping cylinders - Adjustable blade and cutting feed - Air dust gun Work sequence 1) Setting the cutting angle 2) Inserting the material 3) Adjusting the stroke speed 4) Bring the clamping cylinder up to 20 mm of material 5) Clamp the material 6) The machine is ready for operation by pressing the start button. 7) Press and hold the two SAW buttons, the material is sawn. 8) At the end of the cycle, release both SAW buttons and press the STOP button 9) Open the vice and remove or push the material forward * Special accessories included : - ALU chip extractor

Condition: used, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200 x 88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,4 t dimensions 1,2 x 0,9 x 1,5 m Display machine - Never used - 45° left/right miter - Head tilts up to 45° for bevel cuts (compound cuts) Gujdpfszyva Rsx An Esi - Pneumatic dual quick-clamping system - Includes micro-spray system - Includes carbide saw blades

Condition: new, Year of construction: 2025, machine/vehicle number: 6972, cutting height (max.): 155 mm, cutting width (max.): 1,100 mm, saw blade diameter: 450 mm, cutting length (max.): 3,350 mm, cutting width at rip fence: 1,100 mm, Equipment: scorer, Table dimensions: 1,030 x 680 mm Sliding carriage dimensions: 3,200 x 350 mm Cutting length with scoring unit: 3,350 mm Cutting width at parallel guide: 1,100 mm Max. cutting height with 450 mm saw blade: 90°: 155 mm with saw blade at 45°: 110 mm 3 speeds: 3,000, 3,600 & 4,200 rpm Motors: Main saw: 5.5 kW / 7.5 HP / 50 Hz, Scoring saw: 0.55 kW / 0.75 HP Dust extraction port D = 120 + 80 mm Angle stop extendable to 3,600 mm, Programmable saw blade height adjustment Programmable saw blade tilt adjustment Programmable parallel guide adjustment Motors: Main saw: 5.5 kW / 7.5 HP Scoring unit with motor: 0.55 kW / 0.75 HP Sliding carriage made of anodized aluminum incl. high-precision guide made of hardened and ground steel Sliding carriage locking in any position Saw blade guard with swing-away device Outrigger with adjustable angle stop Godpjwz Nbaefx An Eeui with length compensation at 10°, 15°, 22.5°, 30°, 45° and 90° Belt change for speed adjustment from above (opening in the saw table) Display for set saw blade speed Electrical system and safety devices according to CE standard as inspected, Ex Works, from location Seevetal, without pre-carriage, freight and training, subject to prior sale.

Condition: new, Year of construction: 2026, Fully automatic cutting of large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and aluminium feeding rates for maximum process productivity. • Automatic optimiser mode with aluminium laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). Guedpfxol Sm Elj An Eji • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture Model: A700 Length: 3 m Material Length: 1680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2023, Capacity Ø 15 - 100 mm sawing motor 11 kW saw speed 30-130 U / min hydraulic motor 2,2 kW Saw Feeding Servo 1,5 KW Siemens Material Feeding Motor 1,5 KW Siemens saw-blade dia. Ø360 x T2.6 x 2.25 x 40 mm Gjdpjyk Ihvjfx An Ejui cutting range min. 3000 mm cutting range max. 7000 mm control Siemens hydraulic Rexroth Valve coolant Pulverisiertes Schneidöl required space 2900 x 7400 m weight of the machine ca. 4900 kg GERD WOLFF GLS-160 High-performance circular saw From 10 to 250 Millimeters round material, within seconds, they cut steal of all kinds with precision an ease. Equipped with a material feed system and components from Germany, we combine german with turkish mechanical engineering.

Condition: used, Year of construction: 2012, saw blade diameter 400 mm capacity 90 degrees: round 130 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 180 x 100 mm saw blade turning speeds 3000 U/min Gjdpfxjy N D Nhj An Esui total power requirement 2,2 kW weight of the machine ca. 0,51 t dimensions 3,8 x 1,6 x 1,7 m Automatic Aluminum Circular Saw - Outfeed roller conveyor (4000 mm) with handwheel, flip-up stop, and digital system - Infeed roller conveyor (3500 mm) - Transport dimensions 6.0m x 2.0m x 1.6m

Condition: new, Year of construction: 2025, saw blade diameter: 400 mm, – Saw blade 400 mm – Double mitre – 2 pneumatic clamps – Misting lubrication system Godpfxegg N Dre An Eeui – Blow gun – Protective cover – Documentation – 400V

Condition: used, saw blade diameter 400 mm cutting diameter 135 mm capacity 90 degrees: flat 280 x 70 mm capacity 90 degrees: square 120 x 120 mm capacity 45 degrees: flat 210 x 55 mm capacity 45 degrees: square 105 x 105 mm turning speeds max. 3000 U/min saw-blade dia. 400 x 3,2 x 40 mm motor 400 Volt total power requirement 4,0 kW weight 650 kg range L-W-H 910 x 1200 x 1700 mm Furnishing: Gsdpfxsxabg As An Eoui - Miter circular saw for light metal & plastic profiles - Precise and accident-free work by cutting from below - Quick setting for miter cuts - Workpiece clamping with adjustable vice and pressure piece - pneumatic tool clamping - Operation manual

Condition: used, Year of construction: 2018, saw blade diameter 550 mm weight ca. 650 kg Under-table saw for aluminum and PVC Hydropneumatic saw blade feed Two-hand operation Minimum-quantity lubrication system Table rotates on both sides, with locking positions at +/-45° and +/-60° Mitre cuts up to 60° on both sides Full protective guard Gedpjzvhm Ujfx An Eoui very good condition! The saw was rarely used; it served as a backup machine

Condition: new, Year of construction: 2026, Fully automatic cutting of large aluminium profiles with simple-to-use automation. Put down any aluminium profile, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Optional fully automatic inline optimiser. Automatic measuring of aluminium profile lengths using a laser sensor and on-the-fly job list optimisation against the length measured for minimised wastage in offcuts. Automatic printing of job / part number labels for each part produced (optional). Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and aluminium feeding rates for maximum process productivity. • Automatic optimiser mode with aluminium laser length measure and optimisation for minimum waste (optional). • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture Godsmdqrkepfx An Eeui • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture Model: X70 Length: 4.5m Material Length: 3180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 316792, total length: 2,700 mm, total width: 1,450 mm, total height: 1,900 mm, type of input current: three-phase, overall weight: 1,500 kg, Equipment: documentation/manual, Kaltenbach SKL452 NA including ESTA DUSTOMAT – Year of manufacture 2023 We are offering our Kaltenbach SKL452 NA including ESTA DUSTOMAT for sale. We purchased the machine directly from Kaltenbach as a new machine in 2023 and have since used it in the metalworking department of our WfbM (workshop for people with disabilities). The machine was used exclusively for cutting aluminum profiles. It was operated in a single-shift system with a maximum of approximately 6 hours of machine runtime per day. Guedpfxjz H Sgdo An Eoi The machine can be inspected on-site after prior arrangement. Collection / Transport The machine is offered for sale exclusively at our location. Dismantling, loading, and transport must be organized and carried out by the buyer. If you are interested or would like to arrange a viewing appointment, please contact us.

Condition: used, The second-hand Kölle KS40 panel saw is designed for precise cutting work in professional woodworking. With a 3,000 mm-long sliding carriage, a maximum saw blade diameter of approximately 400 mm and a swivel range of up to 45°, it is suitable for sizing and angle cutting of wood-based materials. Technical data: - Motor: 5.5 kW - Sliding carriage: 3,000 mm - Saw blade diameter: max. approx. 400 mm - Swivelling: 45° Gusdpfx Aozyqrhsn Esi

Condition: used, functionality: fully functional, overall weight: 1,750 kg, Automatic band saw Brand: SABI Model: EB 320 A Type: Automatic straight-cut Weight: 1750 kg Gusdoyc Saaopfx An Esi Cutting capacity: 320 mm / 320x320 mm / round 320 mm Saw blade dimensions: 4570x32x1.1 mm Variable cutting speed: 16-100 m/min. Automatic feed length: 500-4500 mm UNITRONICS control system newly installed 2 years ago.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Sharpening machine for carbide-tipped circular saws. Sharpens the front and rear edges in a single pass. Godpfx Anjzl Snue Ejui Technically inspected. Technical specifications in the PDF.

Condition: new, saw blade diameter: 400 mm, – Saw blade 400 mm – Double miter cut – Compound miter cut – 4 manually operated clamping devices Godpfx Aoz Ehy Ren Esui – Protective cover – Documentation – 400V

Condition: used, Year of construction: 1976, functionality: fully functional, Year of manufacture: 1976 Machine was modernized in 2020. Guedpfxoz Ruhmj An Eei

Condition: used, Metal and non-ferrous circular saw MÖSSNER MK/14 Speed: from 80 to 3000 RPM Table size: 900 x 700 mm Gedpfx Aez I Dhvon Eoui Max saw blade diameter: Ø 315 mm Maxi cutting height: 85 mm Motor: 2 speed Ideal for sawing aluminum plates, bronze etc. Voltage: 380 V Length: 1100 mm Depth: 900 mm Total height: 1300 mm Weight: approx 500 kg

Condition: reconditioned (used), • 150 mm cutting height • 750 mm feed-through width Gujdpfew I Sg Dox An Eei • 350 mm wide slat bushing with used spacer rings and saw blades • Saw shaft fitted with new bearings • 55 kW saw motor • 1,170 mm working height • Infinitely adjustable feed • Roller lifting with hydraulic hand pump • Machine workshop-inspected • Machine newly painted

Condition: good (used), Year of construction: 1998, Robland E45 Saw blade diameter: 450 mm Cutting height: 150 mm Gsdpozznxzefx An Ejui Motor: 7.5 kW Saw blade can be tilted up to 45 degrees Saw blade width to the right of the saw: 1,220 mm Cutting length of the sliding table: 1,270 mm

Condition: used, Striffler Type 2750-E double mitre circular saw for precise mitre and cross cuts in timber profiles, mouldings and frames. The machine is ideally suited to mass production in the window, door and furniture manufacturing sectors, thanks to its two pneumatically swivelling saw units and electronic positioning. Gusdpfozryu Aox An Esi Technical data: - Cutting length: approx. 2,200 mm - Mitre angle: 45° – 90° - Workpiece: max. 50 × 70 mm - Further details: See PDF

Condition: new, Year of construction: 2026, No matter what job you need to cut A700 is the only saw you will ever need. Gsdemb U T Uepfx An Eoui With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the timber you may need to cut. Suitable for bundle-cutting many timbers at once and with high-precision. High-precision timber processing with PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø700 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Air gun and LED interior light • 2× Ø100 mm chip vacuum attachment points • Optional 2.2 kW chip vacuum extractor • Optional automated CNC mitre control system Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture