Recutting circular saw

Esterer DKN

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Ijdpfxjfi Tg He Acqoba Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30

Condition: new, Year of construction: 2025, functionality: fully functional, Professional WoodMizer LT70 sawmill, complete configuration, still packaged. The machine was delivered in April 2025 and has never been used. It was assembled by the manufacturer and is ready for operation. Ibedpfxoyr I Dme Acqja

Condition: like new (used), Socolest DAS 200 twin-shaft multiblade feeding and receiving table - Made in Italy - centering feeding table - discharge receiving table - top drawing rollers TECHNICAL PARAMETERS: - cutting height 200 mm - cutting width 400 mm - engine power 2 x 55 kW - track width 630 mm - disc diameter max 350 mm - feed speed 40 m / min - hydraulic roller height adjustment - hydraulic cutting height adjustment - hydraulic feed Ibsdpfx Ajqup Anecqea - four top pulling rollers - four rows of anti-rejection latches - shaft diameter 70 mm - sleeve diameter 90 mm - pneumatic side pressure centering - diameter of ferrules 2 x 250 mm - minimum workpiece length 720 mm - laser - feeding table belt 5700 mm - width of table 600 mm - top roller pneumatic pressure roller - speed of table regulated on inverter - receiving table 9200 mm - width of rollers 800 mm - diameter of rollers 135 mm - four drop chains - distance between chains 1900 mm Transport dimensions 1300 cm x 240 cm x 200 cm weight 8 t

Condition: ready for operation (used), Year of construction: 2023, Load capacity: 1450/1125kg, load center: 600mm, lift height: 3200/4900mm, battery weight: 300-350kg, free lift: 900mm, mast height lowered: 2100mm, mast height extended: 4900mm, reach: 590mm, ground clearance under mast: 80mm, ground clearance at axle center: 50mm, track width: 1292mm, frame cross-section: 1058mm, front overhang: 655mm, wheelbase: 1120mm, rear overhang: 175mm, side shift: 80mm left / 80mm right, lost load thickness: 880mm, fork tilt back: 3°, fork tilt forward: 3°, min. turning radius: 1350mm, support arm height: 282mm, support arm length: 530mm, maximum speed: 6km/h, gradeability: 5%, battery capacity: 24V/270Ah, fork dimensions: 35x100x1070mm, front wheels (polyurethane): OD 200mm / width 50mm, rear wheel (solid rubber): outer diameter 250mm / width 75mm, AC drive motor: 24V / 2.5kW, AC pump motor: 24V / 5kW, rated power: 2.5kW, width: 1512mm, length: 1950mm, net weight without / with battery: 2800/3150kg, operating hours: 86h. An on-site inspection is possible. Ibsdpfxew S Tyae Acqja

Condition: good (used), Year of construction: 1995, Chipper with horizontal feed via vibratory chute Motor: 30 kW Ijdpfexc H Rlsx Acqsba Max. feed width: 320 mm Max. feed height: 80 mm With conveyor belt

Condition: new, Year of construction: 2025, MAX MAMMUT 400-500-600: High speed log profiling line (up to 600 mm in diameter) for the production of prisms, "river use", "trieste use" beams, boards in general and semi-finished products for pallets. FULLY HYDRAULIC MACHINERY Isdpfx Aehpbthecqeba Minimum diameter of logs 120 mm Maximum diameter of logs 600 mm Minimum working length mm 1.800 Maximum working length mm "Infinite" (∞) Tool holder shaft diameter 60-80 mm Cutter diameter mm 300 Feed speed mt / min. 5 - 70

Condition: used, Iseli BS 5 sharpening machine Iseli EBW leveling machine Ibodpjwgh H Ejfx Acqoa

Condition: reconditioned (used), Total length 550 mm including 2 hydraulic side pressure registers and 2 adjustment registers for frame posts 70 mm, max. tensioning force per saw blade 6.5 tonnes Iodpfsr Ezyxsx Acqeba If required: Magnetic gauges with 3 tubes, 2 magnets and 1 hole for insert sheets are in stock for the following wood dimensions: 18/20/24/25.5/38/40/45/48/50/58/60 and 75 mm, as well as inserts with 12 mm Ø fixing bolts in various widths from 2 to 12 mm

Year of construction: 2006, condition: ready for operation (used), Panel type: Tubular panels for 3-layer parquet, panel length: 2230mm, panel width: 782mm, panel thickness: 9mm-22mm, panel thickness tolerance: 0.5mm/panel, feed rate: 15m-50m/min, output: 12 cycles/min, working height: 1015mm, max. saw blade diameter: 250mm. Extraction included. Documentation available. On-site inspection is possible. Iedjt Amc Ijpfx Acqjba

Condition: good (used), Year of construction: 2000, Schroeder Mosaic Press 160mm. Gluing patterns - brick / English pattern plate 640x274mm and halves 640x137mm glued in 6 variants: - single brick offset 50% - double brick offset 50 % - triple brick offset 50 % - single brick offset 25 % - double brick offset 25 % - triple brick offset 25 % Ibodpfx Ajr Iyvbocqea