Used Worm Hackers for sale (352)

Condition: new, Year of construction: 2026, cutting height (max.): 150 mm, cutting range round steel at 45°: 108 mm, cutting range round steel at 90°: 108 mm, BERG+SCHMID Double Miter Bandsaw GBS 250 Super AutoCut, Speed: 35 + 70 • Miter angle left: 60° + right: 45° • Quick-release clamping device, adjustable • Solid clamping device + machine casting • Ball-bearing swivel table • Hydraulic brake cylinder • Large, robust material support • Cooling system Dedpfxjr Ik Sqj Ak Aokw • Worm gear running in an oil bath • Enclosed saw frame • Adjustable ball roller bearing • Tool compartment – door in the base • Cutting monitoring via ammeter • Cutting pressure feed rate regulator • Support roller (infeed side) • Machine base (delivered disassembled) GBS 250 Super AutoCut 3-Stage System: I. Automatic saw frame lowering via the hydraulic cylinder, steplessly adjustable feed rate, with limit switch at the end of the cut II. Fast lowering of the saw frame to the workpiece, then switching to normal sawing feed. (e.g., for scoring) III. Hydraulic cylinder acts as a brake cylinder: a) Manual operation (e.g., for ejecting) or b) Lowering in the rest position Saw band dimensions: 2765x27x0.9mm Additional accessories such as saw blades, roller conveyors, measuring stops, minimum quantity lubrication, etc. available upon request! Delivery time: from stock in Waiblingen, Beinstein.

Condition: used, Year of construction: 2001, overall weight: 10,000 kg, total length: 3,000 mm, total width: 2,300 mm, total height: 2,500 mm, REISHAUER RZ 362 A – CNC Gear Grinding Machine Year of Manufacture: 2001 Serial No.: 75523 Max. Workpiece Diameter: approx. 360 mm Max. Module: 7 Max. Gear Width: approx. 175 mm Max. Workpiece Weight: depending on configuration, approx. 60 kg Grinding Worm Diameter: approx. 270–350 mm Helix Angle: up to approx. ±45° CNC Control: Reishauer Connected Load according to Nameplate: 26 kVA Weight approx.: 10,000 kg Dimensions (LxWxH) approx.: 3000 x 2300 x 2500 mm Year of construction: 2,001 Condition: in working order Dkjdpfxezy Tkms Ak Ajw Terms of payment: 100% prepayment before pick-up Terms of delivery: Loaded on truck under power: No

Condition: ready for operation (used), SEW WF20 CMP50S/BP/KY/AK0H/SB1 worm gear motor, serial number 01.1896603719.0001X13, used, in good condition, 100% functional, scope of delivery as shown in the photos. Dkedpfx Aoy T Utfsk Aow

Condition: good (used), Horizontal-vertical rotary table with direct indexing, “MECA” design Table diameter: 320 mm Mounting: MK 3 Center height: 250 mm Table height, horizontal: 140 mm Weight, rotary table: approx. 70 kg Weight, tailstock: approx. 20 kg Accessories / Special features: • Horizontal and vertical • Indexing possible via scale drum and additionally via 24-step direct indexing 15° • Swivelable dividing worm for fast rotation • Tailstock Siegfried Volz Werkzeugmaschinen Djdpfszyyx Rex Ak Aekw Rüschebrinkstr. 151-153 D – 44143 Dortmund - Wambel / Germany

Condition: new, Year of construction: 2025, functionality: fully functional, power: 1.1 kW (1.50 HP), input voltage: 400 V, type of input current: three-phase, total height: 1,700 mm, total length: 1,400 mm, total width: 685 mm, overall weight: 200 kg, cutting range round steel at 45°: 145 mm, cutting range round steel at 90°: 225 mm, cutting range square steel at 45°: 150 mm, cutting range square steel at 90°: 190 mm, saw band length: 2,480 mm, saw band width: 27 mm, Saw band --- 2480 x 27 x 0.9 mm Saw speed --- 45 - 90 m/min Motor --- 400V - 1.1 kW Weight --- 200 kg Cutting capacity at 0° ----- 225 mm / 190 x 190 mm / 245 x 150 mm Cutting capacity at 45° ----- 145 mm / 150 x 150 mm / 190 x 150 mm Cutting capacity at 60° ----- 90 mm / 90 x 90 mm / 120 x 90 mm INCLUDED * Adjustable material clamp * Graduations up to 60 degrees * Automatic shut-off * Low-noise electric motor * Enclosed worm gear transmission * Hydraulic pressure control * CE emergency stop * Coolant pump * Base cabinet * Quick-release clamp Dkjdpfx Asga Tzqok Asw * M42 Bi-metal saw band

Condition: new, Year of construction: 2026, Weima Hacker / Shredder WL 8 with Top Features - 2nd knife row, log spacer, 4-sided segment base, discharge auger with gear motor, Fast reverse hydraulics with shock valve The single-shaft shredder WL 8 is a proven classic for shredding wood waste of all kinds. It is used, for example, thousands of times in woodworking companies worldwide. The high number of these highly sought-after shredders guarantees proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures extremely high durability (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display To ensure that the electronics are optimally adapted to the machine, we design, build and wire our control cabinets ourselves. We use only high-quality components – for example, from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as adjusting the slide timing or stop ensure a high throughput. The built-in overload protection also prevents damage to the machine. No material bridging due to self-cutting hopper design The hopper performs several tasks at once. First, the material to be shredded is fed into it – manually, mechanically or via a conveyor belt. The generous opening also makes it easy to fill very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridging, is crucial for the shredding process. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas spring are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robust due to its extreme stress during the shredding process. To prevent dust or foreign objects from entering it, we have separated it from the machine frame. This also makes it very easy to maintain and access. Dodpfxjpdqzxo Ak Askw Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (RPM): 80 - 125 Power (kW): 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): 15/20 mm or according to customer requirements Suction nozzle (mm): 200 Feed opening (mm): 1000 x 1250 Length (mm): 2045 Width (mm): 1740 Height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd knife row - Log spacer - 4-sided segment base - Discharge auger with gear motor - Fast reverse hydraulics with shock valve - Screen size 15/20 mm List price: €52,320, sold at a special price Location: In stock at 54634 Bitburg - available immediately - The pictures show a machine without a discharge auger; one will be available in stock.

Condition: new, Year of construction: 2026, Professional, very powerful and efficient band saw for metal with 45° swivel arm. The perfect solution for ironwork, production and craft workshops. Unparalleled for many years, the design and solid construction make it a perfect solution. Dkjdpfx Aew U Skvok Aew Machine description Professional, very powerful and efficient metal band saw with 45° swivel arm, CORMAK BS 712 SW is based on refined solutions making it unrivaled in its class. Arm made of shaped spheroidal cast iron ensures rigidity during operation and absorbs all vibrations. Control panel is located on the arm of the cutter. It features high efficiency and simple handling. Provides cutting in vertical plane and in the plane perpendicular to the axis of the cut material, or at any angle in 45° – 90° range. Element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Suitable speed of arm lowering is obtained thanks to the valve controlling oil flow between hydraulic cylinder chambers. Rugged, stable and refined construction as well as the arm made of uniform cast iron provide high rigidity and stability while cutting, ensuring accuracy and long-term reliability. The design of the 20 mm saw blade used in the machine makes it possible to cut large quantities of elements. Required band linear velocity is obtained by changing the ratio on the belt pulley between the worm gear and the driving motor. Technical data Motor power 1.1 kW Band speeds 22/33/45/65 m/min Power supply 400V Band dimensions 2360×20×0.9 mm Cutting range 45°L – 45°R Weight 145 kg Dimensions 1280x575x1140 mm Angle 0°.....Ø 205.....215×205.....205×205 45° L.....Ø 150.....100×200.....130×130 45° R.....Ø 140.....140×90.....90×90 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: good (used), Year of construction: 1984, max. wheel diameter 250 mm gear width 275 mm max. module 6 weight of the machine ca. 5,5 t The gear hobbing machine ZFWZ 250 is suitable for the economical production of all hob-processable cylindrical gear types, such a: - spur and helical gear, wormgears and worms, splined shafts, keyed shafts, serrated profiles, chain wheels and ratchet wheels,as well as conical and crowned spur and helical gears. Interchangeable wheels and milling accessories Technical data: - Workpiece diameter (max): 250 mm - Module (max): 6 mm - Axial feed travel (max): 275 mm - Tangential feed travel (max): 100 mm - Tooth helix angle (max): 45 degrees - Milling cutter diameter (max): 145 mm - Milling cutter length (max): 170 mm - Table clamping surface (min): 195 mm - Table clamping surface (max): 470 mm Power Milling cutter speeds - Stepped in 2 ranges: 56 ... 250 rpm - (Standard version): 90 ... 400 rpm Dkodpov T Nqaefx Ak Aew - Infinitely variable in 2 ranges: 63 ... 180 rpm - (special version DC motor): 140 ... 400 rpm Weights - Machine net: approx. 5000 kg - Electrical cabinet: approx. 800 kg - Hydraulic unit + coolant tank + chip transport: approx. 700 kg Overall dimensions (with oil mist filter) - Length: Standard version: 3950 mm DC drive: 3450 mm (or 3350 mm according to table) - Width: 3300 mm - Height: Machine: 1980 mm Machine with DC drive: 2150 mm Electrical cabinet: 2200 mm

Condition: used, Manufacturer: PFAFF Type: HSE63 Max. lifting force: 50 kN Max. tension: 50 kN Screw torque at max. lifting force: 190 Nm Max. permit. torque on the drive shaft: 168 Nm Dksdpfx Asugty Hsk Asw Screw: M16 Worm gear with oil lubrication Oil amount: 0.7 l Hub: 850mm The indicated price refers to 1 piece.

Condition: ready for operation (used), SEW WF10 CMP40M/BP/KY/AK0H/SB1 worm gear motor, serial number 01.1909224001.0001X13, used, in good condition, 100% functional, scope of delivery as shown in the photos. Djdpfx Asy T Urujk Aokw

Condition: used, maximum load weight: 2,280 kg, overall weight: 3,000 kg, axle configuration: 2 axles, first registration: 07/2026, loading space length: 5,000 mm, total width: 2,090 mm, Year of construction: 2026, Car transporter with overloader tipping design Comfort package - 100 km/h version - closed aluminium floor - spare wheel with bracket - continuous wheel chocks Low-frame chassis: Axle: continuous maintenance-free commercial axles with reinforced long bearings, hot-dip galvanized Brakes: 4-wheel overrun brake with fully automatic reversing mechanism and parking brake Suspension: individually sprung wheels with progressive effect and shock absorption – excellent running characteristics even under extreme loads; 4 Octagon shock absorbers and 100 km/h specification Wheel bearings: maintenance-free, water-protected, double-row angular ball bearings Drawbar: extra long V-drawbar frame, hot-dip galvanized; reinforced automatic jockey wheel Coupling: automatic coupling with safety and wear indicator Body: reinforced, torsion-resistant tipping frame (hot-dip galvanized) with closed full Alutec profile floor, anti-slip, low-bed version; 12 recessed tie-down rings Tipping mechanism: oil-hydraulic tipping system with 2 lifting cylinders Dsdpfezq Iprox Ak Aekw Winch: laterally movable winch stand with electric cable winch Standard accessories: spare wheel mounted under the loading bed with bracket; continuous, longitudinally adjustable and removable wheel chocks Lighting system: lighting according to StVZO. 12 Volt, 13-pin with reversing light; 4-chamber lights with tail, brake, and indicator lights; 2 rear fog lights, 2 triangle reflectors, and license plate lighting; yellow side marker lights left and right; cables and lights mounted protected. Sideways swiveling lighting system including foldable license plate holder with gas strut.

Condition: ready for operation (used), The Klingelnberg PSR 500 U worm gear testing machine was designed as a universal machine for the flexible testing of worm gears and is used by manufacturers of gear and transmission technologies for the single-flanking rolling test process for worm gear sets (EFWP). Technical data: Dodozxghvjpfx Ak Askw Max. worm gear diameter: 500 mm Max. spindle length: 500 mm Max. spindle diameter: 200 mm Center distance: 0 ... 400 mm Max. measuring speed: 60 rpm Braking torque: 2.5 Nm Max. worm gear weight: 150 kg Max. spindle weight: 50 kg Table diameter: 300 mm Machine weight: 800 kg Dimensions: 1500 x 1500 x 1600 mm The following parameters can be measured here: • Flank deviations Fi', fi', fl', fk' • Flank clearance, runout, roundness (option) • Contact pattern with digital camera • Pitch deviation • FFT analysis, spectrum *Image shows the machine in its current condition as a retrofit/modernized unit. *Further information about the machine is available upon request.

Condition: used, Worm gear, bevel gear Manufacturer: Sew-Eurodrive Type: DFY112ML/TH Output speed: 1400 rpm Torque: 24 Nm Power: 6.6 kW IP65 Voltage: 50 Hz V 230/400v Power consumption: A 49.50/16.50 Speed: 3000 rpm Gear ratio (i): 27.88:1 weight: 36 kg Dedpsudywgofx Ak Aekw

Condition: used, Professional meat grinder Duker Rex is designed for fast and efficient grinding of fresh and slightly frozen products with high capacity and reliable performance. This model is equipped with an automatic feeding worm system that enables continuous and even product transfer to the grinding unit, ensuring stable operation and high productivity. The large 120 liter hopper allows processing of bigger product quantities without frequent refilling, while the production capacity of up to 2000 kg/h makes this machine an excellent solution for intensive professional use. It is suitable for processing meat, poultry, fish, vegetables and other food products. The model uses the Unger cutting system with a 130 mm plate diameter, ensuring precise and high-quality grinding with a uniform final product texture. Stainless steel construction provides long service life, high hygiene standards and easy maintenance. Robust industrial design, powerful 11 kW motor and stable construction guarantee safe and reliable operation in demanding working conditions. Technical specifications: Machine type: Meat grinder Manufacturer: Duker Rex Capacity: up to 2000 kg/h Hopper capacity: 120 L Power: 11 kW Dsdpsy Izlksfx Ak Askw Voltage: 400 V / 3+N Frequency: 50 Hz Cutting system: Unger Plate diameter: 130 mm Loading height: 1300 mm Output height: 680 mm Dimensions: 800 x 1200 x 1370 mm Net weight: 674 kg Material: Stainless steel Operation: Stable, powerful and reliable Maintenance: Easy and simple

Condition: new, Year of construction: 2026, functionality: fully functional, nominal power: 5 kW (6.80 HP), 5 kW, 7.5 hp Cutting height 200 mm Dksdjdxw U Iepfx Ak Aow Tilts up to 60° to the left, up to 30° to the right via hand crank from the front Cutting height when tilted at 45°: 140 mm Cutting width 420 mm, cutting width when swiveled at 45°: 290 mm Swivels up to 60° to the left, up to 45° to the right Includes saw blade for wood 6,000 mm heavy-duty outfeed roller table, mounting side on the left, adjustable stop with handwheel from the machine in length, pneumatically lockable, length digitally readable, digital display in 230V version 4,000 mm heavy-duty infeed roller table, mounting side on the right Machine can be tilted on both sides from the front via hand crank and worm gear On request, various options are available, e.g., larger cutting height (215 mm and 240 mm), pneumatic material clamping, and laser cutting indicator With appropriate modifications, also suitable for aluminum processing The roller tables, type RLH-ST60 and RO-ST60, can be supplied in longer or shorter versions upon request.

Condition: excellent (used), max. wheel diameter 200 mm gear width 300 mm module 0,5 - 25 centre distance 750 mm Djdpfxey Umi Is Ak Ajkw weight of the machine ca. 0,2 t dimensions of the machine ca. 0,8 x 0,6 x 0,6 m worm testing roll-machine

Condition: new, table diameter 300 mm table load 100 Horizontal kg swivelling range 0 - 90.0 Grad turning speeds 0.2 - 2.0 U/min turning speeds 1.2 - 12.0 U/min Dsdpexaatnsfx Ak Askw bore 20.0 mm total power requirement 230 Volt weight of the machine ca. 50.0 kg dimensions of the machine ca. 480 x 325 x 470 mm Furnishing: - Precise drive unit with face plate, on a stable floor stand. - clockwise / counterclockwise - 2 speed series, stepless - Swivel range from 0 ° - 90 °. Manual tilt - DC gear motor with worm gear, infinitely variable. - diameter of 300 mm. Chrome-plated surface to protect against weld spatter. - The device's control panel is easy to understand and use. - Start / stop via a location-independent foot switch. - The speed and direction of rotation are set on the machine. - HF protected. Scope of delivery: - control (integrated) - foot switch

Condition: new, Year of construction: 2024, ✅ New goods ✅ Top price ✅ Immediately available ✅ Shipping possible ◾ SCHORR electric high lift truck ◾ Model RR12HH with 3500mm lifting height ◾ Low maintenance and smooth running ◾ Including 24V batteries and charging station ◾ 1.2t / 1200kg load capacity ◾ Top price-performance ratio ◾ AVAILABLE IMMEDIATELY! Gross price: 3.399,00€ incl. VAT Net price: 2.856,30€ excl. VAT The electric high lift trucks from SCHORR offer an excellent price-performance ratio. The off-centre drive unit allows a small turning radius with best all-round visibility. Each model is equipped with a multifunction tiller which displays the current battery level and can be started via the ignition lock. The tiller can be operated with both hands and also has a worm mode. The design of the pallet truck is both robust and easy to maintain; impact-prone areas are equipped with yielding plastic. The emergency stop switch is centrally located for easy access at all times. The lift trucks are equipped with tandem load rollers as standard, which overcome uneven surfaces such as paving stones with low noise and vibration. TECHNICAL DATA see picture Dkedpfx Akjidqr Sj Aew Further data and information on request, we look forward to your call or message!

Condition: used, first registration: 09/2012, TS Industrie Wood Chipper 190M Price incl. VAT. Dodpfx Akjzalrwe Askw * 1251 m³/h * Up to 19 cm trunk diameter * Hopper and discharge chute can be rotated * 50 hp Kubota diesel engine * Service and TÜV inspection included with purchase Errors and prior sale excepted.

Condition: good (used), Gear motor, electric motor, electric gear motor, worm gear motor, parallel shaft gear motor -Manufacturer: SEW-Eurodrive, gearmotor with integrated frequency inverter with brake -Square gear unit: F series -Type: FH67BDT71D4/BMG/MM03/RA1A/KPF6 -Speed: 1.2-6.1 rpm -Power: 0.075/0.37 kW -Protection class: IP54 -Hollow shaft: Ø 40 x 210 mm -Brake: 5 Nm Dsdpfx Akow Hz Nae Ajkw -Number: 4x motor available -Price: per piece -Dimensions: 425/280/H330 mm -Weight: 44 kg/piece

Condition: good (used), Gearbox, spur gear, worm gear -Gearbox: Flat gearbox, unfortunately without type designation -Part No.: R 8 395-2 -Translation: 2-stage 1:8 / 1:2 counter-rotating -Shaft: Ø 45 x 55 mm / Ø 20 x 22 and 25 x 75 mm Dodpfx Ajt Trwrok Ajkw -Dimensions: 550/270/300 mm -Weight: 40 kg

Condition: new, saw blade diameter 520 x Ø 50 mm cutting diameter 200 mm cutting length 420 mm Cutting height at 45° 140 mm dimensions of saw-blade 520x3,6/3,0x50 mm turning speeds 2800 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 310 kg. range L-W-H 1400 x 900 x 1650 mm - Crosscut and miter saws for crosscuts - Miter adjustment on both sides (60°/45°), with fixed stops - Shift cut on both sides (60°/45°), with fixed stops - Stable cast iron construction - Precise ball bearing guidance of the tool slide hardened and welded steel shafts - manual saw feed Dkedpfsxaaxdox Ak Ajw - Saw blade infinitely adjustable in height - socket for opt. suction Furnishing : - 3.0 kW motor for ALU cuttings - Saw blade can be tilted via handwheel and worm gear (shift cut) - Saw blade diameter 520 mm - Saw blade mounting hole 50 mm - Saw blade speed 2,800 rpm - 400 Volt / 3 kW (S6/40%) motor with brake and automatic. Star-delta motor circuit - Machine weight approx. 250 kg Cutting data : - Cutting length at 90° = 420 mm - Cutting height at 90° = 200 mm - Cutting length at 45° = 295 mm - Cutting height at 45° = 140 mm Special accessories included: - HM saw blade 520x3.6/3.0x50 mm - Hydraulic feed brake, continuously adjustable - Pneumatic material clamping from above best. from : 2 vertical clamping cylinders adjustable with lever valve - pneumaschine saw blade spray device - Machine can be tilted from the front on both sides using a hand crank - Machine stand

Condition: used, Universal Tool Milling Machine MAHO Type MH 600 P Machine No. 61742 Year of manufacture: approx. 1982 Travel (X) table cross movement: 500 mm Travel (Z) head movement: 400 mm Travel (Y) vertical movement: 370 mm Table size: 720 x 410 mm Spindle taper: SK 40 Spindle speed: 40 - 2000 rpm, 18 steps Feeds X, Y and Z: 5 - 500 mm/min, stepless Rapid traverse X and Z: 1.2 m/min Rapid traverse Y: 0.8 m/min Quill travel horizontal: 80 mm Quill travel at vertical head: 80 mm Distance spindle nose to table: max. 370 mm Dodpfxoyy Df Ds Ak Aekw Spindle drive motor power: 4 kW Electrical connection: 380 Volt, 50 Hz - Digital display with HEIDENHAIN TNC 131 positioning control - Vertical milling head swivels +/- 90° - Hydromechanical tool clamping - Universal swivel-tilt rotary table - Hydromechanical clamping for table rotary motion - Table rotation with direct and indirect indexing and indexing disc feature (hand crank with locking pin missing) - Table rotation worm gear ratio 1:120 - Automatic central lubrication - Control cabinet fixed to machine - Coolant system integrated in machine base - Machine lamp - Operating manual and circuit diagram Required space (L x W x H): 1800 x 1800 x 1900 mm Weight: 1650 kg Very good condition

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 135414, measuring range X-axis: 4,200 mm, measuring range Y-axis: 1,600 mm, measuring range Z-axis: 2,100 mm, controller model: C99, No reserve price – guaranteed sale to the highest bidder! Dodpfx Aey R Taxsk Aokw The machine is currently not operational. There are defects on the Y-axis and Z-axis. Further details can be found in the attached service report and calibration certificate. TECHNICAL DETAILS Measuring range X: 4,200 mm Measuring range Y: 1,600 mm Measuring range Z: 2,100 mm Measuring table: 5,000 x 1,800 mm Calibrated measuring volume X-direction: 4,200 mm Y-direction: 1,600 mm Z-direction: 1,600 mm MACHINE DETAILS Control unit: C99 EQUIPMENT Probe head: TP20 #5M2409 Measuring software: CMM-OS 5.4.00 CAA File: 03.06.2025 Calibration sphere: #134983 Note: The measuring computer HP Z420 Windows 7 can be supplied upon request. Please note this device has a virus infection caused by a hacker attack.

Condition: used, For converting electrical energy into kinetic energy. Conversion of torque and speed through gearing. Used electric motors, available with and without gearbox, with and without brake, in various designs and with different equipment and key figures. Speeds: 67 rpm Power factors: cosφ Power ratings: kW Amperages: A Voltages: 22 V Frequency: 50 / Hz Gear types: spur gear, worm gear, bevel gear, parallel shaft gear, variable speed gear. Gearbox speeds: 8 - 559 rpm Torques: 5 - 840 Nm Drive: rpm Power factor: 0 cosφ Gearbox drive: 559 rpm Dedpfx Ajvcqrkok Ajkw Torque: 840 Nm Power: - kW Current: - A Voltage: 22 V Frequency: 50 / Hz