Used Worm for sale (314)

Condition: used, mileage: 101,381 km, power: 107 kW (145.48 HP), first registration: 04/2013, fuel type: diesel, empty load weight: 2,915 kg, maximum load weight: 3,085 kg, overall weight: 6,000 kg, axle configuration: 4x4, wheelbase: 2,200 mm, brakes: other, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 1,770 mm, loading space width: 1,114 mm, loading space height: 380 mm, operating hours: 8,519 h, Equipment: ABS, additional headlights, all wheel drive, cabin, crane, differential lock, immobilizer system, onboard computer, power assisted steering, soot filter, trailer coupling, * German vehicle * One owner * Complete documentation with inspection reports available * 8,519 operating hours * The Kiefer Boki is in visually very good condition * Model: Kiefer Boki 1151B with COPMA loader crane mounted at the rear and folded * 4x4 all-wheel drive Csdpfxsxxi Sws Ahmjrc * Front lift with municipal hydraulics * Loader crane COPMA 35.3 with 3 hydraulic extensions * Lifting capacities: at 2.75 m = 995 kg, 3.11 m = 885 kg, 4.44 m = 600 kg, 5.77 m = 450 kg, 7.10 m = 355 kg, 8.45 m = 250 kg * Hook height: 10.5 meters * 5+6 control circuits * Rotary servo * Two clamshell buckets available at additional cost * 2 hydraulic outriggers * 3-way tipper * Body dimensions: L=1,770 mm x W=1,114 mm x H=380 mm * Trailer coupling * Towing capacity: 3,500 kg * Snow plow blade available at additional cost * Winter service lighting * 5-speed gearbox * Cab with 2 seats * Worm drive * Heated windshield * Joystick control * Rotating beacon lights * ABS * Differential lock * Leaf spring suspension * Wheelbase: 2,250 mm * Gross vehicle weight (GVW): 6,000 kg * Empty weight: 2,915 kg * Payload: 3,085 kg * In case of sale to traders or for export (both inside and outside the EU), German commercial code applies. If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, DGUV certification, safety inspection (SP), or UVV regulation inspection. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to avoid misunderstandings about their condition and suitability on the buyer's side. Viewings and inspections are possible at any time by appointment and are expressly desired. All information is provided without guarantee. No liability for errors or incorrect information is assumed. The buyer is obliged to independently verify the condition and features of the goods/vehicles. We reserve the right to change, prior sale, and errors.

Condition: good (used), Year of construction: 2020, Geared motor, electric motor, electric geared motor, worm geared motor -Manufacturer: Dalian NET, worm gear motor -Gearbox: Type NMRV 1:10 Codjy Ai T Eepfx Ahmjrc -Speed: 143 rpm -Engine: Type Y2-90S-4 -Power: 1.1 kW -Protection rating: IP54 -Shaft: Ø 28 x 110 mm -Dimensions: 440/220/H260 mm -Weight: 24 kg

Condition: good (used), Year of construction: 2018, Geared motor, electric motor, electric geared motor, worm geared motor -Manufacturer: Dalian NET, worm gear motor -Gearbox: Type NMRV 050 1:100 -Speed: 9 rpm Crjdpfx Asy Ai N Hshmjc -Engine: Type Y2-802-6 -Power: 0.55 kW -Protection rating: IP55 -Shaft: Ø 25 x 90 mm -Dimensions: 390/200/H250 mm -Weight: 18.8 kg

Condition: excellent (used), functionality: fully functional, WMW Germany GFL-400 x 1000 mm Thread Milling Machine Manufacturer: WMW (Germany) Credpfjy Rgm Esx Ahmec Model: GFL-400 Centre Height: 205 mm Maximum Workpiece Length: 1000 mm Maximum Workpiece Diameter over Cross-Slide: 200 mm Maximum Swing Diameter over Bed: 400 mm Cutter Speeds: 55 rpm to 250 rpm Maximum Cutter Diameter: 100 mm Spindle Bore: 80 mm - Suitable for thread milling, worm milling, and spline milling. - Also capable of gear hobbing and spline hobbing. - Supplied complete with change gears, index plates, arbors, and additional accessories. - The machine is in excellent working condition.

Condition: used, Year of construction: 2010, Type: PowerGrind280 Serial number: 5000067561 Year of construction: 2010 Hole plate diameter: 280 mm Capacity: 5.5 - 8.5 t/h frozen blocks Hopper: 600 litres Power: 3 x 400V, 50Hz, 160kW Dimensions: 3250 x 1650 x 2450 mm Crsdpfx Aheyn Ntbsmoc Weight: 5000 kg Including trolley for removing breaking worm and trolley for screw, plates and knives

Condition: new, Year of construction: 2026, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Cjdpfx Ajudi Unshmsrc Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle 0º ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: used, mileage: 10,539 km, power: 75 kW (101.97 HP), first registration: 10/2011, fuel type: diesel, empty load weight: 2,515 kg, maximum load weight: 985 kg, overall weight: 3,500 kg, axle configuration: 4x4, wheelbase: 1,850 mm, next inspection (TÜV): 01/2027, brakes: other, color: orange, driver cabin: day cab, gearing type: other, emission class: euro5, suspension: steel, number of seats: 2, loading space length: 1,750 mm, loading space width: 1,250 mm, loading space height: 300 mm, maximum speed: 50 km/h, Equipment: additional headlights, all wheel drive, cabin, differential lock, immobilizer system, onboard computer, power assisted steering, soot filter, * German vehicle * Multiple units available * Only 10,539 km – original * ONLY 974 operating hours * MOT valid until 01/2027 * Condition as shown in the photos * KIF snow plough blade * Clearing width: 1,700 mm * KIF combination rear spreader * HAKO broom available at extra cost * With only 1.32 meters width, the Tremo is the ideal compact tool carrier for pedestrian zones, narrow alleys, driveways, etc. * Three-way tipper with steel floor and aluminium drop sides * Body dimensions: L=1,750 x W=1,250 x H=300 mm * 4x4 all-wheel drive with crawler gear * Four-wheel steering selectable – turning circle only 3.10 meters Crsdpfxox Srams Ahmjc * EasyDrive (hydrostatic drive) (SN) * Heated front windscreen * Front linkage * VW industrial engine * Joystick controls * Radio CD * Comfort cabin with 2 seats * Municipal hydraulics + rear hydraulics * Rotating beacon * Worm gear drive * Winter service lighting * Work lights * Wheelbase: 1,850 mm * GVW: 3,500 kg * Unladen weight: 2,515 kg * Payload: 490 kg * ... * Various attachments for year-round use available at extra cost Should a new MOT inspection be required, we will be happy to provide a quote from our partner workshops. Our offer generally does NOT include new MOT, new DGUV, new periodic inspection, or new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to avoid any misconceptions regarding their condition and suitability. Viewings and inspections are possible at any time by prior appointment and are expressly desired. All information provided without guarantee. We accept no liability for errors or incorrect information in this offer. Buyers are required to independently verify the condition and equipment of the goods/vehicles for themselves. Subject to change, prior sale, and error.

Condition: used, Butter-Homogenizer / Microfix, fationalizes the processing and packaging of cold store butter by reducing the time of defreezing (butter having a temperature of ±4 °C can be homogenized by the Microfix, homogenizing butter having lower temperatures depends on the consistency of the butter). Automatic adaption of the Microfix to the output of the combined packaging machine by means of a feeler switch is possible (not on the machine at this moment). Improving the quality of the butter by ensuring finest water dispersion resulting in an increased shelf life of the homogenized and packed butter. Likewise, the spreadability of the butter is improved. Reducing the loss of water during the packaging operation. The Microfix is adapted to the actual quality of butter by means of a variable feed worm drive, rotors having different numbers of knives (this machine is equiped with a stainless steel rotor with knives) and the regulation of the flow speed in the outlet. Motor: 15 kW for the drive of the rotor and 3 kW for the drive of the feed worms. Capacity: 1400 kg/hr Motor: 15 kw on rotor Homogeniser Motor on Screw feed: 3 kw Dimensions: 180 x 90 x 165 cm Weight: 890 kg Crodpfx Ahsymkfcsmec

Condition: good (used), Year of construction: 2006, Hurco machining center VMX 24 i IKZ chip worm spindle mount Sk 40 Crsdpfsudb I Tex Ahmec

Year of construction: 1940, condition: used, Automatic universal hobbing machine for the production of spur gears worm gears Largest milling diameter 120 mm Smallest milling diameter 5 mm Crsdpfxokw T Rmj Ahmsc Smallest tooth pitch module 0,30 Largest tooth pitch 2 mm largest milling length 100 mm with all accessories

Condition: good (used), Year of construction: 2015, functionality: fully functional, Description: The machine is in good technical condition, with the possibility of testing by prior agreement. Heidenhain iTNC 530 control. Dimensions in mm. Spindle: 15,000 rpm, SK40, 38 tool positions. Tilting rotary NC table Ø 440 mm. Worm drive for C-axis. Single-sided drive for A-axis. T-slots for the rotary table Ø 440 mm. Standard coolant device. Scraper conveyor. High-pressure coolant (IKZ). Blowing device. Through-spindle air blast. Manually operated cabin doors. Manually operated cabin top. Polycarbonate safety glass. Electronic handwheel, Heidenhain operating module. Renishaw or BLUM measuring probe. The price of a new machine was approximately 270,000 EUR. We have a complete specification of the supplied components and options for this machine – can be sent upon request. Crsdpfey Rgfnsx Ahmjc

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, cutting height (max.): 250 mm, total height: 1,806 mm, total length: 1,012 mm, total width: 1,916 mm, cutting range round steel at 45°: 200 mm, saw drive: 1,500 W, 250 x 420mm Metal Cutting Semi-auto Horizontal Scissor Type Band Saw Machine SH-1018JA 250 x 420mm Industrial-Use Semi-Automatic Horizontal Band Saw equipped with manual vise and adjustable hydraulic down feed. It is an ideal tool for the small to medium machine shop, maintenance shop, metal fabricating shop, school, and limited run production work. It is a great machine for cutting solids, square, round, rectangle and tubing material. Its solid construction ensures many years of reliability and accuracy at a high level of performance. Standard Features A 2 hp motor, heavy-duty reducer. The 4-speed transmission is equipped with the best worm gear speed reducer. Cast iron quick set up vise. Rigid guide arms with carbide blade guides. Integral coolant system. Blade brush to remove chips from blade gullet. Down feed rate & cutting pressure control. Csdpfxsv R Drao Ahmorc Secure clamping via a dependable manual lead screw system with anti-slip hand wheel. Easy blade change with front access at waist level. Adjustable material stop. Bi-metal saw blade. Tools, leveling pads, and an additional wire brush. Operation & parts manual. Optional Accessories Infinitely variable blade speed Specification Type of Saw: Horizontal Automation: Semi-Automatic Miter: NO Production Line: Horizontal-Pivot Capacity-Max. Height (mm): ≦230 Capacity-Max. Width/Throat (mm): ≦230 Capacity-Round (mm): 250 Blade / Circular Saw Width (mm): 27 Blade Speed Min.~Max. (M/min): 24~87 Angle of swivel Min.~Max. (ﾟ): 0~45 Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: new, Year of construction: 2025, functionality: fully functional, type of input current: three-phase, cutting height (max.): 250 mm, total height: 1,052 mm, total length: 1,751 mm, total width: 1,100 mm, empty load weight: 528 kg, cutting range round steel at 45°: 230 mm, cutting range square steel at 45°: 230 mm, saw drive: 1,500 W, 250 x 460 mm Metal Cutting Semi-Auto Horizontal Scissor Type Mitering Band Saw Machine SH-460M 250 x 460 mm Industrial-Use Semi-auto Swivel Frame and Bed miter Band Saw is a heavy-duty swivel frame and bed miter design with a capacity of 250mm (10"). Key features included in this robust machine allow for the use in mass production environments as well as tool room applications. Specifically designed bed and swivel allow users to easily and accurately set angles. Standard Features A 2 hp motor, heavy-duty reducer. The 4-speed transmission is equipped with the best worm gear speed reducer. Built-in hydraulic unit includes hydraulic motor, pump, and hydraulic tank to offer the convenience of raising the saw head automatically after cut-off. A work height selector is located over the hydraulic cylinder and is used to adjust the blade to minimum clearance height over the work. Specially designed heavy-duty cast iron swivel center features straight and miter cuts from 90 to 60 deg (backwards) with quick setting and precise positioning. Rigid guide arms with carbide blade guides. Secure clamping via a dependable manual lead screw system with anti-slip hand wheel. Integral Coolant System. Blade brush to remove chips from blade gullet. Down feed rate & cutting pressure control. Easy blade change with front access at waist level. Adjustable material stop. Bi-metal saw blade. Tools, leveling pads. An Additional wire brush. Operation & parts manual. Optional Accessories Infinitely variable blade speed. 1M or 2M Roller table. Type of Saw: Horizontal Automation: Semi-Automatic Miter: Single Miter Production Line: Horizontal-Mitering; Horizontal-Pivot: Capacity-Max. Height (mm): ≦230 Capacity-Max. Width/Throat (mm): ≦460 Capacity-Round (mm): 250 Blade / Circular Saw Width (mm): 27 Blade Speed Min.~Max. (M/min): 24~87 Credpfx Aov R Dt Dohmsc Angle of swivel Min.~Max. (ﾟ): 0~60 Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Year of construction: 1990, condition: like new (used), Short/ Noodles pasta line: - capacity 400 kg / h - Delivery conveyor - mixer - dispenser, water / flour, horizontal - worm conveyor - Press - Vibro feeder , reconditioned in 2010 - First dryer , reconditioned in 2010 Cjdpfjh Dxgaex Ahmsrc - Secound Dryer - Two drying strips - Two strips for dried pasta - Metal Detector - Automatic packing unit

Condition: used, Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Crjdpfx Ahohzcg Njmoc Dimensions of machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 300 liters (mixing capacity depending on meat up to 200 kg) Worm, worm housing and closing are completely stainless Delivery time: 10 working days after advanced payment

Year of construction: 2025, operating hours: 300 h, condition: like new (used), Equipment: CE marking, TECHNICAL DETAILS: Drive Unit: Model: VM800T. Maximum load capacity: 400 t. Turning capacity: 800 t. Crjdsy Ex D Sjpfx Ahmoc Maximum speed: 108 cm/min. Minimum speed: 20 cm/min. Maximum diameter: 8,000 mm. Minimum diameter: 2,500 mm. Length: 6,360 mm. Width: 1,544 mm. Height: 1,565 mm. Weight: 15,300 kg. Diameter range: As per drawing, 2,500 ÷ 8,000 between 61º and 54º. Wheels: Steel, Ø 950 x 350 mm. Power: 2 motors of 7.5 kW with primary epicyclic gearboxes and secondary worm gearbox. Idler Unit: Model: VC800T. Maximum load capacity: 400 t. Maximum diameter: 8,000 mm. Minimum diameter: 2,500 mm. Length: 5,852 mm. Width: 1,500 mm. Height: 1,565 mm. Weight: 12,720 kg. Diameter range: As per drawing, 2,500 ÷ 8,000 between 61º and 54º. Wheels: Steel, Ø 950 x 350 mm.

Condition: good (used), Year of construction: 2020, DC motor, servo motor, geared motor, electric motor, DC geared motor -Manufacturer: Ott, Servo geared motor BLDC worm gear motor -Type: TBSL043030010-110 -Voltage: 24 V -Speed: 300 rpm -Transmission: Transtechno i= 10 -Shaft: Ø 14 x 63 mm -Quantity: 1x geared motor available Codpfeyxcmqox Ahmjrc -Dimensions: 215/63/H95 mm -Weight: 2.3 kg.

Condition: new, saw blade diameter 350 mm capacity 90 degrees: round 115 mm Cedofmck Hepfx Ahmerc capacity 90 degrees: square 100 mm capacity 90 degrees: flat 130 x 80 mm capacity 45 degrees: round 100 mm capacity 45 degrees: square 85 mm capacity 60 degrees: flat 90 x 80 mm clamping range 130 mm turning speeds 30 / 60 U/min dimensions of saw-blade 350 x 32 x 2,5 mm total power requirement 1,1 / 2,2 kW weight of the machine ca. 0,22 t dimensions of the machine ca. 1200 x 860 x 900 m Aktionspreis 2026 Inkl. base frame !!! Manual miter saw for miter cuts from 45° left to 45° right. Steel worm wheel with double ball bearings Saw blade shaft mounted on eccentric made of spheroidal cast iron Bronze wheel with wedge and conical coupling to ensure maximum power transmission to the steel worm wheel Vice with adjustable guide bars Adjustable anti-cutting burr device (enables burr-free cutting) Length stop Double return springs Safety main switch Emergency stop button Speed switch Electric coolant pump for lubrication and cooling of the saw blade (attachment a micro spray device possible) Motor 1.5/1.8 kW - 400 volts

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control Crodpfx Ajyxdwdshmoc • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: new, Year of construction: 2025, operating hours: 60 h, functionality: fully functional, workpiece weight (max.): 40,000 kg, wheel width: 3,700 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 1,300 mm, feed length Z-axis: 500 mm, rotary table diameter: 3,700 mm, position of the milling head: 0,025, table diameter: 2,000 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 6 m/min, total length: 12,000 mm, gear diameter: 400 mm, total height: 5,000 mm, total width: 4,000 mm, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, TECHNICAL REQUIREMENTS GEAR HOBBING MACHINE GHM 2500 CNC Description of the main components of the GHM 2500 machine The GHM 2500 CNC gearing milling machine is a machine tool intended for processing by milling toothed wheels and toothed crowns. The machine is equipped with an external teeth milling head - which can process the teeth with an inclination angle from 0 to +/- 45 degrees - and an internal teeth milling head. The machine is composed of a milling unit, a unit for clamping and rotating the workpiece and the pinion axis centering tip. The milling/gearing unit is provided with three translation axes and two rotation axes, as follows: -X axis: longitudinal/radial movement towards the workpiece axis -Y axis: vertical movement of the gearing head -Aza Z: tangential movement of the gearing head -Axis: inclination +/-45 degrees of the gearing head -Axis C: rotation of the main axis of the gearing head The part fixing unit (the machine plate) has a rotation axis, axis B, for rotating the part. 1. External Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. 2. Internal Gearing head – the housing of the tooth milling head is a GG300 gray cast iron cast piece. On the front side there are the counter guides of the Y axis (vertical movement of the head). Inside are the main tool actuation mechanisms, the mechanism for the horizontal movement of the gearing head axis and the mechanism for tilting the gearing head. The main actuation mechanism of the gearing shaft is composed of a 55 kW – S1 motor, a ZF angular reducer and a gearing shaft, mounted in the housing of the toothing horse. Cedpey A Ngljfx Ahmjrc 3. The Quill - has the role of fixing the high parts, having a vertical displacement stroke. 4. The longitudinal advance mechanism of the upright, X axis – is made by a servo motor 30 Nm_ 3000 rpm, a Gressner worm reducer and a ball screw diam. 80 x 10, accuracy class IT 3. 5. The vertical advance mechanism of the toothing head, Y axis – consisting of a 30 Nm_ 3000 rpm servo motor, a Gressner worm reducer and a ball screw diam 80 x 10, precision class IT3. 6. Plate advance mechanism / plate rotation, C axis – is made with two 50 Nm_ 2000 rpm servo motor, a Gressner worm reducer and a duplex worm that meshes with the worm crown located on the plate. 7. The gearing head tilting mechanism, axis B – is made by a / 20 Nm_3000 rpm servo motor, a Gressner worm reducer and a worm gear-segment worm gear transmission. 8. The axial displacement mechanism of the gear head, Z axis – is made by a 20 Nm_3000 rpm servomotor, an Alpha Getriebe planetary reducer and a ball screw diam. 63 x 10, accuracy class IT3. 9. Top horizontal positioning mechanism, auxiliary axis X1 – a 20 Nm_ 2000 rpm servo motor, an Alpha Getriebe planetary reducer and a ball screw diam 63 x 10, precision class IT5.

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Cjdpfoxz Dqmsx Ahmjrc Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 2007, control Siemens Sinumerik 840 D weight 57.000 kg voltage 400 V Gleason PFAUTER CNC gear hobbing machine P 2400/2800 for gear cutting of cylindrical and worm gears as well as all other regularly occurring rollable profiles and shapes on the cylindrical workpiece circumference. Large gear hobbing machines from Gleason offer maximum productivity for roughing and finishing cylindrical gears for many industries: wind turbines, industrial gearboxes, mining and shipbuilding, gear machining and many more. The power range of the drive takes future tool developments into account. Of course, the gear hobbing head drive is also backlash-free. These machines are particularly well suited for use with state-of-the-art, cutting materials, regardless of whether dry or wet machining is preferred. The machine can be used for dry or wet machining and is also equipped with the appropriate chip conveyor for both machining methods. The machine is equipped with an internal profile milling head as a motorised milling head. --> Working range and technical data Nominal workpiece diameter: 2.400 mm --> Largest millable diameter approx.: 2.800 mm --> Smallest/largest distance between cutter and workpiece axis: 100/1.200 mm --> Largest axial slide travel (special design): 1.300 mm --> Largest clampable cutter (internal milling head): --> Diameter max: 440 mm --> Max. cutter width: 90 mm --> Swivel range of the internal profile milling head/vertical axis: +/- 15° --> Milling mandrel taper: HSK-B160 --> Maximum milling cutter travel: 300 mm --> Table diameter: 2.500 mm --> Part wheel diameter: 2.200 mm --> Table bore --> Diameter: 800 mm --> Depth: 875 mm --> Maximum table load approx.: 40.000 kg --> Max. feed and rapid traverse speeds: --> axial (Z-axis): 4.000 mm/min --> radial (X-axis): 3.000 mm/min --> tangential (Y-axis): 3.000 mm/min --> Milling cutter cooling lubrication device/electric centrifugal pump: approx. 150 l/min --> Increased drop height of magnetic chip conveyor: 1,600 mm --> Increased main stand: 1,300 mm axial slide travel --> Internal profile milling head as motor milling head instead of standard motor milling head --> Max. millable profile depth in steel with approx. 600 N/mm² strength: approx. 65 mm --> Infinitely variable milling speed: 50 - 150 min?¹ --> Max. milling cutter diameter: 440 mm --> Min. milling cutter base circle diameter: 310 mm --> Max. milling cutter width: 90 mm --> Min. internal diameter at 0° bevel angle: 800 mm+) --> Max. workpiece height at 0° bevel angle: 600 mm --> Max. workpiece ring thickness (including clamping device): 500 mm Cjdewzyp Ispfx Ahmjrc

Condition: good (used), Seydelmann GW 300 Frozen Meat Grinder Thanks to their robust construction and their extremely strong power of motor, Seydelmann Frozen Meat Grinders guarantee a perfect cutting image even when grinding whole frozen meat blocks down to -25 °C (-13 °F). A very high hourly output and a very uniform grain size is achieved with any material. Seydelmann Frozen Meat Grinders can be integrated ideally into production lines. The machine frame is made of stainless steel and completely closed so that all pipes, motors and other parts are integrated into the machine. All edges are rounded and all surfaces on the machine are polished very precisely and designed with a slope so that cleaning water will drain completely from all surfaces. Thanks to embedded covers and the closed bottom of the machine frame water cannot enter the machine and pollution is prevented. Credpfxsy Dquys Ahmec The first stage of the size reduction process takes place in the hopper with the worm of the Frozen Meat Grinder. With its extended profile and relief grinding windings, the worm cuts off approximately 8 cm (3.2 in) of the frozen meat block with every rotation, and carries the meat to the cutting set for grinding. The GW 300 is equipped with a two-speed drive. The first speed is for deep-frozen blocks of meat or when using hole plates with small holes and the second speed is suitable for reduction with hole plates with bigger holes. Manufacturer: Seydelmann Model: GW 300 Hole plate diameter: 300 mm Capacity: Up to 10.000 kg/h Power of motor: 78/105 kW Power of AC-6 motor: 140 kW Hopper capacity: 450 Liters Machine dimensions LxWxH: 2.700x1.500x2.400 mm Conveyor dimensions LxWxH: 2.500x900x2.100 mm Total weight: 3.300 kg.

Condition: excellent (used), Cold room lock, cold storage lock, mortise worm lock, cold room door lock -Manufacturer: STUV, cold storage lock, unused, original packaging Crodpfx Ahoqqpkdomec -Type: 3.16.416.2 Links -Number: 8x door locks available -Price: per piece -Cardboard dimensions: 260/150/H40 mm -Weight: 1.1 kg/pc.

Condition: used, Year of construction: 2005, Name: Sludge dewatering centrifuge used Manufacturer: Huber Type: RoD 1500 Crjdpfoy Edfbsx Ahmec Year built: 2005 Driving force: 18,5 kW Throughput m³/h: 12 m3/h Permissible sediment density: 1,2 kg/dm³ Max. bowl speed: 4000 rpm Inner diameter drum: 365 mm Material: Stainless steel Dimensions: L 2800 x W 1000 x H 1100 mm Empty weight: 3000 kg Technical doc.: Yes Message: Immediate availability, Worm drive: Viscotherm Rododiff 10715, Hydraulics B/C 7.5 -16 Z HP Accessories: Control cabinet and a hydraulic system Condition: Second hand Price: On demand