Used Yamaguchi Wb 12 H for sale (66,237)

Condition: ready for operation (used), Centrifugal Pump, Pump, Grundfos 4 kW, Used Machine Manufacturer: Grundfos Type: CR 10-12 A-A-A-V-HQQV Overall Dimensions: Nodjv Dr Icopfx Ag Ijwc Length: 255 mm Width: 240 mm Height: 1040 mm Flow Rate: 10 m³/h Head: 96.7-122 m Year of Manufacture: 2020 Electrical Data: 400V; 4 kW; 7.9 A

Condition: excellent (used), functionality: fully functional, empty load weight: 9,390 kg, maximum load weight: 22,610 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 04/2015, loading space length: 13,400 mm, loading space width: 2,400 mm, loading space height: 2,450 mm, total length: 13,860 mm, total width: 2,600 mm, Year of construction: 2015, Equipment: cooling unit, Schmitz Cargobull SCB*S2 / Carrier TS 1450-12 / 3 units available • Manufacturer: Schmitz Cargobull • Model: SCB*S2 • First registration: 04.2015 • Internal length: 13.40 m • Width: 2.40 m • Height: 2.45 m • Rear axle steering • Refrigeration unit: Carrier TS 1450-12 • Cooling down to -30°C • External length: 13.86 m • Width: 2.60 m • Kingpin: 8 cm • Fifth wheel height: 1.19 m • Unladen weight: 9,390 kg • Payload: 22,610 kg Nedpfx Agoxw Uydj Iswc • Perm. total weight: 32,000 kg • German vehicle • German registration documents • Ready for immediate use - Subject to prior sale - Errors and/or typos excepted - Sale according to our terms and conditions.

Condition: used, -Dimensions (LxWxH): 2150x1970x2730 mm -Model: LR-812-H -2 trolleys: 800x600 -360 baguettes -Baking surface: 19.2 m² -Refractory stone system -Power: 5 kW -Voltage: 400V -Rotary rack convection oven with integrated heat recovery and internal heat release through refractory stone sidewalls 1-Exhaust duct 2-Convection turbine 3-Burner Nwedpfjyly Iqjx Ag Isc 4-Rotary mechanism 5-High-performance steam generator 6-Extraction wall 7-Suspended rotary trolley/trolleys 8-Insulation 9-Rotating tray

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 8,272 h, load capacity: 16,000 kg, lifting height: 8,200 mm, free lift: 4,100 mm, fuel type: diesel, mast type: duplex, construction height: 5,750 mm, fork carriage width: 2,500 mm, fork length: 2,400 mm, empty load weight: 23,720 kg, total length: 5,313 mm, drive type: Diesel, construction width: 2,550 mm, Diesel forklift Load center: 1200 Mast type: Duplex Condition: Ready for use and fully functional Technical condition: Very good Front tires type: Pneumatic Front tires size: 12.00-20 Rear tires Type: Air Rear tires Size: 12.00-20 Description: In addition to this Kalmar model, we have approx. 200 heavy-duty forklifts, compact forklifts, forklift trucks & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage - sago-online Hire purchase & financing at favorable conditions are always feasible for us. We are also happy to buy your used truck free of charge, even without you purchasing a vehicle from us. Our owner Mr. Peter Sawitzki will be happy to advise you in detail about this DCG 150-12 P.S.: Our forklift master workshop specializes in repair, maintenance, overhaul and special construction for forklifts from 8 tons. We are also happy to display your vehicle for sale on consignment. Sideshift, fork positioner, heating, full cab, air conditioning, full free lift, Nwedpfx Aeu Dzalog Ioc swivel seat

Condition: used, Year of construction: 2018, color: white, overall weight: 16,000 kg, maximum load weight: 13,160 kg, empty load weight: 2,840 kg, loading space volume: 49 m³, loading space width: 2,480 mm, loading space length: 7,300 mm, loading space height: 2,720 mm, first registration: 05/2018, axle configuration: 2 axles, total length: 7,300 mm, driver cabin: day cab, emission class: none, Equipment: truck registration, Reference number for inquiries: 40942 Krone, swap body / container Nwsdpoyl Rlgjfx Ag Ioc * Year of manufacture: 2018 * 7.45 m * Fixed roof * Load securing certificate: DIN EN 12642 Code XL * Portal doors * Textile finish * Telescopic landing legs * Rail-compatible – craneable * Other * Gross vehicle weight: 16,000 kg * Unladen weight: 2,840 kg * Payload: 13,160 kg * Permissible total weight: 16,000 kg * Interior dimensions: L = 7,300 mm, W = 2,480 mm, H = 2,720 mm * Internal volume*: 49 m³ * Corner casting dimension E = 5,853 mm * Overhang dimension: 799 mm * Parking height: 1,120 mm * Pallet spaces: 18 * Steel box body 7.45m, rail-compatible * Recessed lashing rings on the sides Liability disclaimer: Subject to modifications, prior sale and errors. You can find additional photos and videos on our homepage. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast, hassle-free financing * Submission of all (export) documents * Order export plates / customs plates * Vehicle preparation: new tarpaulins, lettering, paintwork, etc. * Professional loading / load securing * TÜV inspections, registration service * Transport of commercial vehicles Ask our trained specialists – we will be happy to advise you.

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ). Seppi M. H-SMO-B 125 Mulcher / NEW / in stock & immediately available Price: €11,790.00 net / €14,030.10 gross Working width: 125 cm Overall width: 140 cm Depth: 120 cm Height: 60 cm Weight: 380 kg Support roller: 152 mm V-belts: 4 - Powerful and manoeuvrable attachment suitable for excavators or crawler vehicles, ideal for maintaining embankments and fallow land - Mulches grass and light brush up to 7 cm diameter - Suitable for excavators from 5 to 13 tons - Designed for mounting on various adapter plates - Drive designed for hydraulic motor according to the carrier unit's oil flow - Indirect belt drive with 4 V-belts - Drop-forged counter blades - Double-skinned housing made from high-tensile steel - Adjustable discharge hood with rear rubber guard - Reinforced support roller with double taper roller bearings, height-adjustable by 5 cm Nwedsymi Enopfx Ag Iec - Rotor wall thickness: 12.5 mm - Front protection with chains - Colour: red RAL3020 · anthracite RAL7021 OPT 371 Rotor with SMO flails (standard) - 12 pieces, part no. 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic oil flow in l/min (min-max): 60 - 120 OPT 099 Floating mounting (parallel linkage) Optional: MS08 adapter plate incl. bolts and installation = €750.00 net Three hydraulic connections required: pressure, return, and drain. Unit delivered without hoses or couplings. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. We have a very large selection of various Seppi M. products available for immediate delivery in our warehouse! Simply contact us at / . Finance options available upon request. We are an official Seppi M. sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. With 800 used commercial vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We can supply the full range of Seppi M. products! Errors and prior sale excepted! = Further Information = Please contact Marius Herden for further details.

Condition: like new (used), Year of construction: 2008, Please contact us via WhatsApp or !Hammelmann Aquajet 12 HDP 124, 2500 bar, 24 liters. Year of manufacture 2008, Deutz engine 140 kw. Nwjdsitm E Topfx Ag Isc

Condition: like new (used), functionality: fully functional, Year of construction: 2016, operating hours: 100 h, control type: CNC control, controller manufacturer: CADMAN TOUCH, bending force (max.): 1,600 t, working width: 12,000 mm, stroke length: 800 mm, distance between stands: 10,600 mm, operating speed: 9 mm/s, number of axes: 15, back gauge: 1,000 mm, Only 100 Working (table/guiders/tooling still in prohibitor) Installed never used in production only testing CNC T1 + T2 + T3 Bending help support arm in front 3 x HH 2600 Module backgauge 3 x Z1+R1+Delta1 Lower Tooling set Variable VLA 50-150 mm Upper Tooling set LVD 505; Adjustment V-Axis 59,3 to 249,3 mm Thermotec Oil chiller GC25T-35 max. 2200 kPa CADMAN TOUCH with the best software for pressbrakes Hydraulic top tool clamping Table width 500 mm Troath in column 1000 mm Max. bending length: 12000mm Distance between column: 10600mm Max. pressing force: 1600T Dis. Beam - Table: 1070mm Beam stroke: 800mm Table Width: 500mm Troth beam: 1000mm Approch speed: 80mm/min. Working speed: 9mm/min. Return speed: 90mm/min. Nwodpeygkuwefx Ag Ijc Adjustment X-Axis back gauge:600mm Number of controlled axis: 15 (Y1/Y2/X/Z1/2/3, R1/2/3, Delta 1/2/3, T1/2/3 Control: CADMAN TOUCH Crowning: Yes Hydraulic toolclamping: Yes Power: 125kW Length: 14875mm Width: 5430mm Height: 7906mm Weight: 277500kg Why you need 1600 Ton Pressbrake, Bending force depends on: Material thickness Material strength Bend length Die opening When any of those go big, tonnage skyrockets. A 1600-ton press brake is used when: Plate is thick (20–60+ mm / ¾"–2½"+) Material is high-strength Parts are long (6–10+ meters / 20–30+ ft) Tight radii or deep bends are required Forming Heavy Welded structures like: Bridge girders Box columns Large beams and stiffeners Base frames for industrial machinery Shipbuilding Defence & Naval like: Hull sections Deck plates Bulkheads Reinforcement ribs Enegery & Infrastructure like: Wind tower sections Power plant components Pressure vessel shells (pre-forming) Transformer tanks Heavy Machining & Ground & Mining jobs like: Excavator frames Crusher housings Dump truck bodies Mining chute liners Furnace housings Kilns Massive welded assemblies Material to bend on 1600 t machine: Carbon steel: S235 / S275 / S355 A36, A572 Plate thickness: ~20–50 mm+ High strength steel S690 / S700 Hardox, Strenx Much higher tonnage needed even at thinner gauges Stainles steel: 304 / 316 Needs ~1.5–2× the force of mild steel Wear-resistant plate Heat-resistant steels JOB Example: Bending 40 mm S355 steel over 8 meters can easily require 1,200–1,600 tons, depending on tooling. Bending instead of welding: Increases strength Reduces distortion Cuts weld time and cost Improves fatigue life Looks cleaner and more accurate A 1600-ton press brake is used when: The part is too thick Too strong Too long It’s not for sheet metal shops — it’s for heavy industry, shipyards, steel fabricators, and energy projects. Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), mileage: 538,104 km, power: 552 kW (750.51 HP), first registration: 08/2019, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x4, wheelbase: 3,000 mm, fuel: diesel, color: red, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, Year of construction: 2019, Equipment: AdBlue, air conditioning, central locking, electric window regulation, onboard computer, parking heater, = Additional Options and Accessories = - Rear work lights - Front work lights - Heated mirrors - Windshield - Cab - Tipping hydraulics - PTO - Sleeper cab - Auxiliary heater - Pre-heating automatic system = Remarks = Volvo FH16.750 6x4 - PTO/Hydraulic - 3.00 WB - Full air - Work Remote MY: 27-8-2019 KM: 538104 YV2R0P0DXKA849946 PTO & hydraulic system Full air suspension 3.00 m wheelbase Low roof Work remote control = Further Information = Technical Information Number of cylinders: 6 gVW: 29,000 kg Transmission Gearbox: I-Shift, 12 speeds, automatic Axle Configuration Front axle: Tire size: 385/65R22.5; Max. axle load: 8,000 kg; Steering; Tire tread left: 50%; Tire tread right: 50% Rear axle 1: Tire size: 315/80R22.5; Twin tires; Max. axle load: 10,500 kg; Tire tread left inside: 40%; Tire tread left outside: 40%; Tire tread right inside: 40%; Tire tread right outside: 40% Rear axle 2: Tire size: 315/80R22.5; Twin tires; Max. axle load: 10,500 kg; Tire tread left inside: 40%; Tire tread left outside: 40%; Tire tread right inside: 40%; Tire tread right outside: 40% Functional Body make: Volvo Condition Technical condition: Good Visual condition: Good More information Please contact VAEX The Truck Traders for further information. Nwjdpfxjx H Iits Ag Ijc

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, bending force (max.): 40 t, Hydraulic Press Brake, PB-H12540. As a dealer of MAC Bending in Europe, we offer the MAC Bending 12540: a high-quality press brake with a bending length of 1250 mm and a capacity of 40 tons. This machine combines a robust construction with high precision and repeatability. Thanks to its compact design, the 12540 is ideal for workshops where efficiency and optimal use of space are important. Suitable for bending steel, stainless steel, and other materials in both single pieces and series production. Nwedpfxjyaq Tyj Ag Ijc The MAC Bending 12540 stands for reliability, user-friendliness, and excellent value for money. Contact us for more information or a quote. The sturdy construction ensures stability and durability, while the easy-to-use controls guarantee high reproducibility and flexibility. Ideal for metal fabricators seeking reliability, precision, and a favorable price-performance ratio. Key features: Bending length: 1250 mm Press force: 40 tons Compact design, suitable for smaller production areas High accuracy and consistent bending quality Suitable for various sheet thicknesses and materials Easy operation and low maintenance requirement Supplied including knives/tooling Optionally available with WILA tooling Alternative tooling possible on request

Condition: new, axle configuration: > 3 axles, Year of construction: 2026, Further information here: Nsdpjv D Abmofx Ag Ijwc

Condition: used, machine/vehicle number: VF644AGL000002623, mileage: 615,000 km, power: 158 kW (214.82 HP), first registration: 10/2008, fuel type: diesel, tire size: 285/70 R19.5, axle configuration: 4x2, wheelbase: 4,700 mm, fuel: diesel, fuel tank capacity: 200 l, color: other, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 6, emission class: euro5, suspension: steel-air, number of seats: 2, loading space length: 71,000 mm, loading space width: 25,500 mm, loading space height: 25,000 mm, Year of construction: 2008, Equipment: central locking, cruise control, electric window regulation, parking heater, spoiler, tail-lift, = Additional options and accessories = - Cushioned seat - Electric windows - Remote central locking - Sleeping cabin - Sun visor Nwjdpfsxfcg Ijx Ag Isc = Remarks = Tail lift: Hollandia 1500 kg, tail lift = More information = Technical information Number of cylinders: 4 Engine capacity: 4.764 cc Drivetrain Engine type: Renault Trucks Optidriver Axle configuration Tyre size: 285/70 R19.5 Front axle: Steering; Tyre profile left: 65%; Tyre profile right: 65%; Suspension: leaf suspension Rear axle: Double wheels; Tyre profile left inner: 75%; Tyre profile left outer: 75%; Tyre profile right outer: 75%; Tyre profile right outer: 75%; Suspension: air suspension Weights Empty weight: 7.600 kg Carrying capacity: 4.390 kg GVW: 11.990 kg Functional Tail lift: HOLLANDIA DHLM, tail lift, 1500 kg Layout Number of beds: 1 Identification Registration number: BV-NJ-74

Condition: used, mileage: 590,000 km, power: 279 kW (379.33 HP), first registration: 06/1999, fuel type: diesel, tire size: 315/80/22.5, axle configuration: 4x2, wheelbase: 49,000 mm, fuel: diesel, color: other, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 12, emission class: euro2, suspension: steel, loading space length: 6,000 mm, loading space width: 2,550 mm, Year of construction: 1999, Equipment: central locking, electric window regulation, spoiler, = Additional options and accessories = - Electrically adjustable front seats - Electric windows - Remote central locking - Sun visor = More information = Nwjdpsu R N U Refx Ag Ioc Technical information Number of cylinders: 6 Axle configuration Tyre size: 315/80/22.5 Suspension: leaf suspension Front axle: Steering; Tyre profile left: 65%; Tyre profile right: 65% Rear axle: Double wheels; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Weights Empty weight: 9.520 kg Carrying capacity: 9.080 kg GVW: 18.600 kg Condition Number of keys: 1 Identification Registration number: BH-DH-49

Condition: good (used), mileage: 633,822 km, power: 552 kW (750.51 HP), first registration: 09/2020, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x2, wheelbase: 4,300 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 8,100 mm, total width: 2,550 mm, total height: 3,880 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, retarder, traction control, - Digital tachograph - Tachograph (control device) - Fixed - Globetrotter (cab type) - PTO (power take-off) - Additional brake system Number of axles: 3, configuration: 6x2, unladen weight: 12,915 kg, gross weight: 29,000 kg, total fuel tank capacity: 530 liters, chassis height: 105 cm, fifth wheel: fixed, number of diff locks: 1, suspension type: full air, cab type: Globetrotter, cruise control, tachograph (control device), digital tachograph, air conditioning, number of airbags: 1, auxiliary heater, electric windows, electric mirrors, radio/cassette, GPS navigation, color: white, heated mirrors, lighting type: xenon lamp, lane departure warning system, climate control, seat heating, Bluetooth, blind spot sensor, engine power: 552 kW (740 hp), fuel: diesel, Euro 6, transmission type: I-Shift, transmission make: Volvo, gears: 12, additional brake system, retarder make: Voith, power steering, ABS, ASR (traction control), PTO (power take-off), starter battery, central locking, seating: 1+1, seat trim: leather, seat adjustment: electric, 10T front axle / wheelbase 430 / retarder Transmission Transmission: VOL, 12 gears, automatic Axle configuration Brakes: disc brakes Suspension: air suspension Axle 1: tyre size: 385/65R22.5; steered; left tyre profile: 14 mm; right tyre profile: 14 mm Axle 2: tyre size: 295/80R22.5; twin tyres; left inner tyre profile: 13 mm; left outer tyre profile: 14 mm; right inner tyre profile: 14 mm; right outer tyre profile: 14 mm Axle 3: tyre size: 295/80R22.5; twin tyres; lift axle; left inner tyre profile: 3 mm; left outer tyre profile: 7 mm; right inner tyre profile: 5 mm; right outer tyre profile: 6 mm Weights Nodpfxsyfmdfs Ag Iswc Curb weight: 12,915 kg Payload: 16,085 kg GVW: 29,000 kg Maintenance APK (periodic technical inspection): valid until 09/2026 Condition Technical condition: good Visual condition: good Damages: none Number of keys: 3 Financial information Leasing price: €918 per month (default, 60 months); please inquire for further information and conditions Identification License plate: KLEYN1 Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European makes, model years and price ranges. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing stock • Recognisable quality • Fair pricing • Correct business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) number plates quickly arranged • Expert technical services • The security of "recognisable quality" • And more… Please visit our website for special offers and full stock: Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: used, mileage: 24,691 km, power: 177 kW (240.65 HP), first registration: 04/1994, fuel type: diesel, overall weight: 12,000 kg, axle configuration: 2 axles, color: red, gearing type: mechanical, total width: 2,500 mm, total height: 3,200 mm, Year of construction: 1994, Equipment: ABS, all wheel drive, compressor, parking heater, Mercedes-Benz 1124AF 4x4 all-wheel drive fire engine LF16/12 according to DIN 14530, 177 kW/240 hp with 9 seats and auxiliary heating First registered: 04/1994 Mileage: 24,691 km ----* 6-cylinder OM 366 LA engine with 240 hp. * 6-speed manual transmission with low gear ratio * 2x differential locks (longitudinal and transverse) * ABS (deactivated via push button) * Warm air auxiliary heating * 90 km/h according to the documents * Compressed air connection for external filling of the brake system * Crew cabin with 9 seats, all with seat belts, including 2 emergency seats * Unladen weight: 7,610 kg. * Gross vehicle weight: 12,000 kg. Nodpfswawdgox Ag Ijwc * Small tow bar with 2000 kg towing capacity * Rotating beacons * Searchlights * 9R22.5 tires in good condition * Wheelbase: 3640 mm * Overall vehicle length: 7300 mm * LF 16/12 fire engine with mast body * 1270-liter fire water tank * Rosenbauer FP 16/8 centrifugal fire pump * Storage for generator in body * 1 spare wheel * Roof storage compartments for ladders and hoses ----TÜV valid until 11/2025 Good technical and visual condition, ready to drive and use immediately! Full service history! Perfect off-road base vehicle for a robust camper/expedition vehicle or other all-wheel drive vehicle applications. Subject to errors and changes!

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 9,637 h, load capacity: 5,000 kg, load center: 600 mm, power: 54 kW (73.42 HP), overall weight: 8,830 kg, empty load weight: 8,550 kg, We offer this used Baumann HX 50/12/57 TR side loader, year of manufacture 2012. Year of manufacture: 2012 Operating hours: 9,637 h Load capacity: 5,000 kg Load centre distance: 600 mm Own weight: 8,550 kg Attachment weight: 280 kg Battery weight: kg Total weight: 8,830 kg Maximum load capacity front axle: 7,606 kg Nwsdoymd D Sepfx Ag Iec Maximum load capacity rear axle: 8,298 kg Installed power: 54 kW If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, fuel type: electric, color: green, fuel: electricity, Equipment: second-hand vehicle warranty, IPC GANSOW 1250E SWEEPER NEW GEL BATTERIES 6V 175Ah (SIAP) (4x) NEW NEOS RECTIFIER 24V 20A 2014 year of production Nwodpstyvd Rofx Ag Ijc The new roller brush combined with the new side brushes ensure an excellent sweeping effect A highly efficient dust collection turbine and new protective rubbers around the main brush prevent fine dust and dust from flying after sweeping. The machine has a large waste flap for collecting larger waste. The device has undergone a general, meticulous renovation, operating fluids and parts such as bearings, drive belts, protective rubbers and filters have been replaced with new ones. Each device we offer has individually taken photos, you are buying exactly the machine you see TECHNICAL DATA: Model: IPC GANSOW 1250 E Sweeping width (mm): 700 Sweeping width with two side brushes (mm): 1200 Efficiency with two side brushes (m²/h): 7800 Sweeping speed (km/h): 6 Tank capacity (l): 85 Filter area (m²): 3.3 Dimensions length x width x height (mm) 1615 mm x 905 mm x 1210 mm Weight of the machine ready for operation (kg) ~ 350 INCLUDED: NEW GEL BATTERIES 6V 175Ah (SIAP) (4x) NEW NEOS RECTIFIER 24V 20A New roller brush New side brushes New roller protective rubbers Garbage tanks 85l THE MOST IMPORTANT FEATURES: The ergonomically designed cockpit and the centrally located operator's seat ensure good visibility of the surface being cleaned The IPC GANSOW 1250 E sweeper is the perfect machine for effective, economical sweeping of multi-storey parking lots, warehouses, production buildings and outdoor spaces. Battery power ensures high flexibility, enabling work also in closed places, buildings and warehouses The large working width (1200mm) ensures high area efficiency Very clear and intuitive control panel.

Condition: new, empty load weight: 574 kg, maximum load weight: 2,126 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,050 mm, loading space width: 1,800 mm, loading space height: 300 mm, loading space volume: 2.2 m³, color: black, construction height: 940 mm, working width: 1,860 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, unbraked, side walls KTL-coated anthracite & rims black, * IMMEDIATELY AVAILABLE * incl. side walls KTL-coated anthracite & rims black Technical data: - Type: New vehicle with 2 years TÜV from first registration - TÜV: 2 years - Floor: Multiplex screen printing with anti-slip surface - Gross vehicle weight: 2,700 kg - Unladen weight: 574 kg - Payload: 2.126 kg - Interior dimensions: 405 x 180 x 30 cm (L x W x H) - Exterior dimensions: 537 x 186 x 94 cm (L x W x H) - Loading sill height: 64 cm - Tires: 195/50R13 steel rim - Brakes: yes - Support wheel: yes, automatic - Incl. vehicle documents (letter) - 100 km/h for an extra charge. Standard equipment: - Low chassis, tires 195/50R13C, loading floor height: approx. 64cm - Designed side wall hinges for very easy attachment of a cargo net - 30 cm high aluminium side walls with robust built-in locks - Hinged front wall. Tethering hooks on the chassis. - U-profile at the rear for easier attachment of the ramps, - double-walled anodized aluminium drop sides - all drop sides foldable and removable - removable steel corner stanchions - multiplex wooden floor with anti-slip surface - very sturdy welded steel frame - frame completely hot-dip galvanized - many cross members for high point loading - additional longitudinal struts welded in throughout - all cross and longitudinal members rest on the floor - 8 lashing brackets recessed inside the side edge (1000DaN / kg) TÜV certified! - Lashing hooks on hinged lower sections - Maintenance-free rubber spring axle - Automatic reverse - Overrun device and parking brake - Sturdy eccentric locks - Reinforced, sturdy bolted V-drawbar - 13-pin plug - Large safety lighting - Lighting recessed in rear frame, integrated rear fog light - Automatic center support wheel Accessories optionally available: - High front grille, 70cm - Tarpaulin + bows - Rear light protection grille - Rotating & crankable rear supports - Anti-theft device - Grids, side wall attachments, nets and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Nsdpfou N Nkisx Ag Iowc

Condition: new, empty load weight: 1,172 kg, maximum load weight: 2,328 kg, overall weight: 3,500 kg, axle configuration: 3 axles, loading space length: 4,900 mm, loading space width: 2,110 mm, loading space height: 1,020 mm, loading space volume: 10.3 m³, color: black, construction height: 300 mm, working width: 2,000 mm, Hydraulics, automatic reverse drive, drive-on ramp, hot-dip galvanizing, rear doors / electric pump / steel dropsides, * IMMEDIATELY AVAILABLE * incl. Technical data: - Make: Brian James - Model: Tipper 526 - Vehicle type: Car transporter - Vehicle condition: New vehicle - First registration: Without first registration - TÜV/HU: 2 years from first registration - Internal dimensions (L x W x H): 360 x 200 x 30 cm - External dimensions (L x W x H): 490 x 211 x 102 cm - Loading height of floor: 71 cm - Perm. Total weight: 3,500 kg - Unladen weight: 1,172 kg - Payload: 2,328 kg - Chassis: High loader (wheels under the body) - Tyres: 195/60R12C - Chassis: ALKO rubber spring axle - Support wheel: Yes - 100 km/h approval: Optional, can be retrofitted DESCRIPTION - Steel drop sides - Click & Clamp: The new Click & Clamp system. For maximum strength and quick addition and removal of various optional drop sides and accessories - Automatically adjustable stanchions and clampable drop sides ensure a comfortable ride without unwanted rattling. - Drop sides with robust built-in locks - All drop sides can be folded and removed - Removable steel corner stanchions - Can be inserted at all 4 corners for tarpaulin frames, lattice attachment, drop side attachments or end wall extension - Welded-on net hook under the loading area - Robust, rattle-free tension locks on the drop sides - Galvanized sheet steel on multiplex floor plate - Reinforced, sturdy bolted V-drawbar - Very sturdy welded steel frame - Frame completely hot-dip galvanized - Many optional accessories can be added and removed quickly and easily. hot-dip galvanized - many cross beams therefore high point load - additional longitudinal struts welded in throughout - 8 lashing points recessed in the floor (1000DaN/kg) TÜV certified! closed at the bottom with spring plates - rear doors at the rear, can be opened sideways, with stop - U-profile at the rear, for easier attachment of the loading ramps - integrated ramp shafts for easy retrofitting of loading ramps - chassis color: black - side panels color: black - double solid 4-stage XL hydraulic cylinders - electric hydraulic pump with battery (12V/90AH) - removable remote control for e-hydraulics - external battery charging socket for optional 230V charger - battery trickle charge: The battery is charged via the vehicle's ignition when the engine is running (depending on the towing vehicle) - Battery charge level indicator - Battery disconnect switch - Safety support under the cargo bed for maintenance work - Rubber suspension axles from ALKO - Automatic reverse driveALKO overrun hitch and parking brake - Cast steel coupling head with integrated ALKO high-security lock - Storage box mounted on the drawbar - Spare wheel in the rear of the trailer - 13-pin plug - Reversing lights - Large LED safety lighting - Complete LED lighting: extremely bright, durable and reliable. - dynamic LED indicators are clearly visible even in bad weather - integrated rear fog light - various front, side and rear marker lights - lighting recessed in the rear frame - heavy-duty support wheel - 5-year chassis warranty New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & distributor f Nwjdpfx Ageu Ht S Ee Isc

Condition: new, empty load weight: 510 kg, maximum load weight: 2,190 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,350 mm, loading space width: 1,800 mm, loading space height: 300 mm, loading space volume: 1.8 m³, color: black, construction height: 950 mm, working width: 1,860 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, unbraked, side walls KTL-coated anthracite & rims black, * IMMEDIATELY AVAILABLE * incl. side walls KTL-coated anthracite & rims black Technical data: - Type: New vehicle with 2 years TÜV from first registration - Availability: Immediately available - TÜV: 2 years - Floor: Multiplex screen printing with anti-slip surface - Gross vehicle weight: 2.700 kg - Unladen weight: 510 kg - Payload: 2,190 kg - Internal dimensions: 335 x 180 x 30 cm (L x W x H) - External dimensions: 467 x 186 x 95 cm (L x W x H) - Loading sill height: 64 cm - Tires: 195/50R13C steel rim - Brake: yes - Support wheel: yes, automatic - Incl. Vehicle documents (letter) - 100 km/h at extra charge Standard equipment: - New dropside hinges incl. welded-on hooks for attaching a cargo net, among other things. - Aluminium drop sides with robust built-in locks - Aluminium drop sides color in anthracite - 30cm mounted - Aluminium drop sides anodized double-walled - All drop sides foldable and removable - Steel corner stanchions removable - Insertion possibility at all 4 corners for tarpaulin racks, grid attachment, drop side attachments or front wall elevation - Sturdy eccentric locks - Screen-printed wooden floor, continuous without impact, slip-resistant and waterproof - Reinforced stable bolted V-drawbar - Very stable welded steel frame - Frame compl. hot-dip galvanized - many cross beams therefore high point load - additional longitudinal struts welded in throughout - all cross and longitudinal beams rest on the floor - 6 lashing brackets recessed inside the side edge (1000DaN/kg) TÜV certified! - U-profile at the rear, for easier attachment of the ramps - cargo net hooks on lower hinge parts - maintenance-free rubber spring axle from KNOTT - automatic reverse drive - KNOTT overrun device and parking brake - 13-pin plug - reversing lights - large safety lighting - integrated rear fog light - lighting recessed in the rear frame - automatic support wheel in the middle Optional accessories available: - High front grille, 70 cm - tarpaulin + bows - rear light guard - rotating & crankable rear supports - anti-theft device - grilles, side wall attachments, nets and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale reserved - Nwjdpfx Agou Ht Hvo Isc

Condition: new, * IMMEDIATE AVAILABILITY * Latest BJT model, upgradeable with numerous options: including hydraulic tilting function, additional ramps, and more. Technical Data: • Brand: Brian James • Model: Race Sport MY2025 • Vehicle type: Car transporter • Vehicle condition: New vehicle • First registration: Not yet registered • TÜV/Inspection: 2 years from first registration • Internal dimensions (LxWxH): 550 x 210 x 199 cm • External dimensions (LxWxH): 715 x 250 x 253 cm • Loading height (floor): 48 cm • Permissible total weight: 3,500 kg • Unladen weight: 1,445 kg • Payload: 2,055 kg • Chassis: Low loader (wheels positioned beside body) • Tyres: 155/70R12 • Suspension: ALKO rubber torsion axle • Jockey wheel: Yes Nwjdpfex Tcfcsx Ag Ijc • 100 km/h approval: Optional, retrofit possible DESCRIPTION • Black superstructure made from high-quality, glass fibre-reinforced plastic. Lightweight yet extremely robust • Full-length daylight roof • Manoeuvring handles front and rear • Dual front hatch doors facilitate lashing of the front wheels • Large, lockable side flaps on both left and right for easy access • Full-height, full-width locking rear loading ramp with internal rotary-bar lock • Rollers at the rear for easy loading • Internal height: 1990 mm; rear entry height: 1880 mm • Perforated steel lashing floor offers superior slip resistance and is extremely wear-resistant, even under the toughest working conditions • Numerous lashing points and a highly durable floor allow for flexible securing options and optimal grip • Closed multiplex floor panel • Electric winch, 12V with cabled remote control. 2,250 kg pulling force, with roller fairlead, winch cable, and snap hook. Powered by on-board battery • Very robust welded steel frame • Frame completely hot-dip galvanized • Spare wheel with bracket mounted • Reinforced, heavy-duty V-drawbar • AL-KO overrunning device and parking brake • Automatic reversing mechanism • Cast steel coupling head with integrated high-security AL-KO lock • Plastic mudguards • 13-pin plug • Reversing lights • Large-format safety lighting • Integrated rear fog lamp • Multiple marker lights, front, side, and rear • Heavy-duty jockey wheel • 5-year chassis warranty Accessories retrofit available—please inquire! New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance, or export/temporary registration plates (Germany) can be provided - Export plates including customs declaration available Descriptions and images are copyright protected!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for immediate delivery! We have been an authorized dealer and service workshop for over 30 years for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Errors, omissions, and prior sale excepted -

Condition: new, empty load weight: 600 kg, maximum load weight: 2,100 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,050 mm, loading space width: 2,000 mm, loading space height: 300 mm, loading space volume: 2.5 m³, color: black, construction height: 940 mm, working width: 2,060 mm, Hydraulics, automatic reverse drive, hot-dip galvanizing, unbraked, side walls KTL-coated anthracite & rims black, * IMMEDIATELY AVAILABLE * incl. side walls KTL-coated anthracite & rims black Technical data: - Type: New vehicle with 2 years TÜV from first registration - Availability: Immediately available - TÜV: 2 years - Floor: Multiplex screen printing with anti-slip surface - Gross vehicle weight: 2,700 kg - Unladen weight: 600 kg - Payload: 2.100 kg - Interior dimensions: 405 x 200 x 30 cm (L x W x H) - Exterior dimensions: 561 x 206 x 94 cm (L x W x H) - Loading sill height: 64 cm - Tires: 195/50R13C steel rim - Brakes: yes - Support wheel: yes, automatic - Incl. vehicle documents (letter) - 100 km/h at extra charge Standard equipment: - Low chassis, 195/50R13C tires, loading floor height: approx. 64 cm - Designed side wall hinges for very easy attachment of a cargo net - 30 cm high aluminum side walls with robust built-in locks - Hinged front wall. Tethering hooks on the chassis. - U-profile at the rear for easier attachment of the ramps, - double-walled anodized aluminium drop sides - all drop sides foldable and removable - removable steel corner stanchions - multiplex wooden floor with anti-slip surface - very sturdy welded steel frame - frame completely hot-dip galvanized - many cross members for high point loading - additional longitudinal struts welded in throughout - all cross and longitudinal members rest on the floor - 8 lashing brackets recessed inside the side edge (1000DaN / kg) TÜV certified! - Lashing hooks on lower hinge parts - Maintenance-free rubber spring axle from BPW - Automatic reverse drive - BPW overrun device and parking brake - Sturdy eccentric locks - Reinforced, sturdy bolted V-drawbar - 13-pin plug - Large safety lighting - Lighting recessed in rear frame, integrated rear fog light - Automatic center support wheel Accessories optionally available: - High front grille, 70cm - Tarpaulin + bows - Rear light protection grille - Rotating & crankable rear supports - Anti-theft device - Grids, side wall attachments, nets and much more. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Nwedpfx Agsu Htqhe Ijc

Condition: new, * IMMEDIATELY AVAILABLE * Includes pendulum tailgate / Tridem / Double hydraulics / Steel side panels TECHNICAL DATA • Brand: Brian James • Model: Tipper 526 • Vehicle type: Rear tipper • Vehicle condition: New vehicle • First registration: None • MOT/Inspection: 2 years from first registration • Internal dimensions (LxWxH): 400 x 200 x 30 cm • External dimensions (LxWxH): 530 x 211 x 102 cm • Platform height: 71 cm • Gross vehicle weight: 3,500 kg • Unladen weight: 1,200 kg • Payload: 2,300 kg • Chassis: High loader (wheels under body) • Tyres: 195/60R12C • Suspension: ALKO rubber torsion axle • Jockey wheel: Yes • 100 km/h approval: Optional, can be retrofitted DESCRIPTION • Steel side panels • Click & Clamp: The new "Click & Clamp" system for maximum strength and rapid addition/removal of various optional side panels and accessories • Automatically adjustable stanchions and clamped side panels ensure smooth travel without unwanted rattling • Robust built-in latches on all side panels • All side panels foldable and removable • Removable steel corner stanchions • Socket mounts on all 4 corners for tarp frames, mesh extensions, side panel extensions, or front panel extensions • Welded-on net hooks under the platform • Sturdy, rattle-free tension latches on side panels • Galvanized steel sheet on multiplex flooring • Reinforced, solidly bolted V-drawbar • Very robust welded steel frame • Frame completely hot-dip galvanized • Multiple cross members for high point load capacity • Additional continuously welded longitudinal beams • 8 recessed lashing points inside the floor (1000DaN/kg), TÜV certified! Covered with spring steel plates beneath • Swinging rear tailgate on hot-dip galvanized steel • U-profile at rear for easy ramp attachment • Integrated ramp slots for optional loading ramps • Twin heavy-duty 4-stage XL hydraulic cylinders • Electric hydraulic pump with battery (12V/90AH) • Detachable remote control for electric hydraulics • External battery charging socket for optional 230V charger • Battery trickle charge: Battery is charged via the vehicle's ignition when the engine is running (depends on towing vehicle) • Battery charge status display • Battery master switch • Maintenance support bar under the platform for service work • ALKO rubber suspension axles • Automatic reversing mechanism • ALKO overrun device and parking brake • Cast steel coupling head with integrated ALKO high-security lock • Tool/storage box mounted on the drawbar • Spare wheel at the rear of the trailer • 13-pin connector • Reversing lights • Complete LED lighting: Extremely bright, durable, and reliable • Dynamic LED indicators • Integrated rear fog light • Various marker lights front, side, and rear • Rear frame lighting recessed • Heavy-duty jockey wheel • 5-year chassis warranty Additional accessories can be retrofitted – please enquire! New vehicle with warranty and TÜV. Nedpfjx Tcfisx Ag Ijwc - Financing or leasing available - Nationwide delivery available - All prices include VAT - Vehicle registration document can be sent in advance, or export plates (Germany) can be provided - Export plates including customs clearance possible Descriptions and images are copyright protected! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg - Errors, omissions, and prior sale excepted -

Condition: excellent (used), Year of construction: 2007, Laboratory foam dosing station with foam mixer and applicator The system works in a similar way to the SUPRA MIX concept. Several chemicals are dosed and mixed with water and air in a controlled ratio. Recipes are stored on the controller and can be changed during operation. Foam applicator with mixer - Dynamic foam mixer with online dosing of 5 products + water - 5 dosing pumps - One direct inlet for mixing - Product monitoring for the chemicals - Air dosing valve - Dynamic foam mixer with adjustable speed Nwsdpju D E A Dsfx Ag Ijc - PLC control - Foam applicator - For one-piece carpets up to 1 m wide applications Stain blocker Dirt, water and oil repellents Fluorocarbons Antistatic chemicals Plasticizers Flame retardants Antibacterial chemicals Moth and beetle repellents Pile stabilizers Anti-hair loss agents Resins for wrinkle prevention and dimensional stability Specification Foam density: 20 - 100 g/l (higher density at lower flow rate) Dosing range: 0.5 - 500 g/l (1:100 with each pump) Foam volume: 50 - 500 l/min Electrical data Connected load: 6kVA, 10A Mains voltage: 400V / 50Hz Control voltage: 24V Dimensions HxWxD = 1400 x 2100 x 860 mm Year of construction: 2007 Purchase price: 47600 ,- € Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: new, functionality: fully functional, Year of construction: 2026, Lintec 120 To./h fully mobile asphalt mixing plant - year: Neu - capacity: 120 To./h - cold feeder: 3x 6m³ - dryer drum - drag elevator to load asphalt onto the trucks - dust collector Dry system with Nomex sleeves filters ; filter space 320m² - mixer Body in carbon steel plate structure, with heating cabinet by thermal oil, internal coating system anti-wear, sealing caps and Nwedpfxeylqfge Ag Isc inspection - control room with fully automatic software and manual mixing desktop - Mobile Tank 60.000L (40.000L bitumen / 20.000L fuel) available for extra price