Used Zeiss Coordinate Measuring Machines for sale (112)

Condition: like new (used), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 600 mm, Machine description: ZEISS CNC coordinate measuring machine (CMM) in portal design - Measuring volume X = 1000 mm, Y = 1200 mm, Z = 600 mm - Table height TH = 850 mm (standard) - Prepared for tactile active sensors - VAST navigator measuring technology (tactile active scanning) ONLY 50 OPERATING HOURS – THEREFORE AS NEW EQUIPMENT ACCORDING TO ORDER CONFIRMATION – SEE ATTACHED PDF FILE Gedpfx Asw H Rfdebrotu

Condition: used, Year of construction: 1998, measuring range X-axis 700 mm measuring range Y-axis 1.000 mm Gsdpfxsyfh R Tj Abrjtu measuring range Z-axis 580 mm control ZEISS - SOFTWARE CALYPSO max. acceleration 1.000 mm/s² In our assessment, the machine is in good used condition and can be inspected under power by appointment. A software update was performed. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 900 mm, measuring range Z-axis: 500 mm, Zeiss CNC coordinate measuring machine Prismo MP5 Year of manufacture: 8/1999 Last calibration: 9/2023 Measuring range: X = 700 mm, Y = 900 mm, Z = 500 mm Features, Equipment: C98 control system with control panel RDS sensor system with RST 5-way probe change magazine RST 5x probe system Gedjufgbnjpfx Abrstu Reference probe Probe accessories Calibration sphere Computer with monitor Calypso Basic 5.4 software Loading system Further accessories and options available Complete retrofit of the C99 and the current Calypso version possible Available at short notice

Condition: refurbished (used), Year of construction: 2001, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,400 mm, measuring range Z-axis: 1,000 mm, Zeiss Prismo 10 VAST GOLD with rotary table Year of manufacture: 2001 Complete retrofit in 2025 Gtjdpfjrmkukjx Abrsu Measuring range: X = 1200 mm, Y = 2400 mm, Z = 1000 mm Machine features and equipment: C99 control with BP26_SE control panel VAST GOLD sensor system Probe changer magazine Probe changer rack Probe accessories Automatic temperature compensation Calibration sphere HP Workstation Z4 with 27" monitor Calypso software Options: as desired Additional accessories Further options possible Inspection under power possible

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 700 mm, Zeiss Prismo VAST XT Year of manufacture: 2003 Retrofit Measuring range: X = 900 mm, Y = 1200 mm, Z = 700 mm C99 controller with operating panel VAST XT probe head VAST GOLD probe head (optional) 13-position probe changer magazine Probe change rack Probe accessories Calibration sphere Technical documentation Additional accessories Gsdpfowyukdsx Abrstu HP workstation with monitor Calypso Basic software Further options available on request Available at short notice Delivery without the automatic feed unit shown

Condition: ready for operation (used), Year of construction: 2001, A fully equipped Zeiss coordinate measuring machine with various accessories and software licenses is available. Measuring dimensions X/Y/Z: 3000mm/1600mm/1000mm, probe head: Zeiss VAST, probe system type: VAST, software: Calypso 2023 ServicePack1_Version 7.6.04, operating hours: approx. 70914h. Machine dimensions X/Y/Z: approx. 4150mm/2450mm/3850mm, weight: approx. 12500kg. Including Zeiss air filter unit, probe rack, reference probe, 8x probe systems, calibration sphere, stand, consoles and stair platform. License transfer possible. Documentation available. On-site inspection is possible. Gtjdpfsyhgm Ejx Abrju

Condition: ready for operation (used), Year of construction: 1996, Measuring range X/Y/Z: 700mm/700mm/500mm, probe ball diameter: 7.9942mm, control: Zeiss C90, touch probe: PH6/TP6, max. measuring deviation: 3.6+L/250µm, max. angle error: 0.22°, weight: approx. 1500kg. Documentation available. On-site inspection is possible. Gtsdpfswzldwsx Abreu

Condition: used, Year of construction: 2014, Measuring machine Zeiss CMM Pro T2 advance 16/21, year of manufacture 2014 – in very good condition • Standard numerical control panel • Base plate dimensions: Length: 4,000 mm Width: 2,000 mm Height: 640 mm Total system height approx. 4,500 mm Gedpfxew D R Nqo Abrjtu • Measuring range: X-axis: 3,200 mm Y-axis: 1,600 mm Z-axis: 2,100 mm • Permissible workpiece weight: approx. 5,000 kg Software: Zeiss Caligo BASIS CNC, Zeiss Caligo QS-STAT • Length measurement deviation according to ISO 10360-2: MPE-E = (27 + L/80)μm

Condition: used, Year of construction: 2017, Measuring machine Zeiss Dura Max, year 2017, without Erowa pallet, delivery and dismantling not included. Commissioned in 06/2018 and used for presetting a Sodick machine with ZK program. Gjdpsyh N Ngsfx Abrjtu

Condition: used, Year of construction: 1992, Measuring range X-axis 2400 mm Gtjdpeg Er Nlefx Abrou Measuring range Y-axis 1200 mm Measuring range Z-axis 1500 mm Machine weight approx. 9,00 t

Condition: defective spare-parts repository (used), Table size: 1300 x 950 mm The device is not functional! Gsdpsicnk Esfx Abrotu Chassis for sale,

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, Equipment: type plate available, ZEISS DURMAX MEASURING MACHINE WITH CALYPSO SOFTWARE Gtsdpfjyg Egbsx Abrou

Condition: used, Year of construction: 2007, functionality: fully functional, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, Zeiss Contura G2 RDS/TP20 Calypso 4.6 measuring software with STEP import option. Possible transport, installation and callibration. Gsdpfx Abjygv D Rjrstu

Condition: excellent (used), functionality: fully functional, measuring range X-axis: 500 mm, measuring range Y-axis: 500 mm, measuring range Z-axis: 500 mm, Zeiss DuraMax Gtodpsygv R Djfx Abrju Measuring software Zeiss Calypso 6.4 Basic Possible trasport, installation, calibration

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 133084, measuring range X-axis: 3,000 mm, measuring range Y-axis: 1,600 mm, measuring range Z-axis: 2,100 mm, Carl Zeiss Pro T compact 3D coordinate measuring machine TECHNICAL DETAILS Control: C99S / FW: 19:05 Gtodjyclnkepfx Abrou Measuring head: RDS CAA No. 165: TP20 Measuring software: CMM-OS 5.4.12 Calibration sphere: 13320 r=15.00000 Measuring range: 3,000 x 1,600 x 2,100 mm CMM expansion coefficient X: 11.9 x 10-6 K-1 CMM expansion coefficient Y: 11.9 x 10-6 K-1 CMM expansion coefficient Z: 10.4 x 10-6 K-1 Holos software version: Holos 2.10 SP23 Rev. 3712 CMM-OS software version: CMM-OS 5.4 MACHINE DETAILS Length: 3,500 mm Width: 2,030 mm Height: 3,600 mm Calibration certificate and maintenance schedule from 2022 available

Condition: like new (used), Year of construction: 2022, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, Equipment: type plate available, Including control panel, control PC, and software as shown in the pictures. EXW – self-collection on site. The purchasing company must sign a sales contract and disclose/confirm its beneficial owners. Furthermore, the signatory must complete a Postident identification. Gtedpfsyam S Sox Abrsu

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, measuring range X-axis: 900 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 700 mm, controller model: C98 mit Bedienpult, The machine was retrofitted in 2019 and equipped with a new computer running Calypso software and the VAST Gold probe head! The last calibration was performed in June 2021! TECHNICAL DETAILS Measuring range X-axis: 900 mm Measuring range Y-axis: 1,200 mm Measuring range Z-axis: 700 mm MACHINE DETAILS Control: C98 with control panel EQUIPMENT VAST Gold probe head 7-position probe change magazine Probe change rack Probe accessories Calibration sphere Technical documentation Workstation with monitor Calypso Basic software Godpjya Hfxefx Abrstu

Condition: excellent (used), Zeiss Coordinate Measuring Machine Model: O-INSPECT 442 Machine Designation: Coordinate Measuring Machine Machine Type: O-INSPECT 442 The multisensor measuring machine O-INSPECT ZEISS enables optimal optical or contact measurement of all features. The CALYPSO software simultaneously displays the actual state, nominal profile, and deviations, making measurement results easy to identify and interpret. General Data: Dimensions: Width 1055 mm, Length 1351 mm, Height 1770 mm Measuring range: X 400 mm, Y 400 mm, Z 200 mm Weight: CMM 800 kg Workpiece, max. 20 kg CMM noise level < 70 dBA Electrical Data: Supply voltage: 100, 110, 120, 125, 230, 240 V~ (± 10 %) Current type: 1 / N / PE Frequency: 50 to 60 Hz (± 3.5 %) Power consumption: max. 1500 VA Fuses: At 230 V or 240 V: 16 A At 100 V or 125 V: 15 A Travel Speeds: Creep speed, SLOW function: 0 to 5 mm/s Setup mode: 0 to 70 mm/s Automatic measurement: Axis (X, Y) max. 200 mm/s Axis (Z) max. 50 mm/s Axis (3D) max. 287 mm/s Ambient Conditions: The following conditions must be met for proper operation of the measuring machine. Operating ambient temperature: +17°C to +35°C Relative humidity: 40% to 70% (non-condensing) Room temperature for measurement: 20°C ±1 K Altitude above sea level: 100–125 V: max. 3000 m 230–240 V: max. 2000 m Probe System: Probe System: CFS Probe Types Data: Probe Type: CFS 2 mm Gjdpfxsw Titlo Abretu Measuring range: 2 mm, Working distance: 61 mm, Spot diameter: 12.5 µm Measurable surface angle to beam direction: 90 ± 15° Measuring range: 3 mm, Working distance: 22.5 mm, Spot diameter: 12 µm Measurable surface angle to beam direction: 90 ± 30° Measuring range: 10 mm, Working distance: 70 mm, Spot diameter: 24 µm Measurable surface angle to beam direction: 90 ± 20° The values for surface angles are limit values and depend on the reflectivity of the workpiece surface. Rotary Table: Mass and resolution Table weight: 7 kg Resolution: 0.15’’ Dynamics: Angular speed max: 50°/s Rotational speed: 8.3 min⁻¹ Scope of Delivery: In the standard version, the O-INSPECT coordinate measuring machine is supplied with the following components: - Coordinate measuring machine (CMM) - Controller (integrated) - Control panel - PC with peripherals - Software - CALYPSO 5.2 - Documentation - Probe system - Reference stylus - Calibration artifact - Calibration template Scope of delivery: (Zeiss coordinate measuring machine as shown) Condition: used (Specifications subject to change and errors excepted!) Please inquire about transport options prior to purchase. If you have further questions, we are happy to assist you by phone.

Condition: not inspected (used), functionality: unexamined, measuring range X-axis: 800 mm, measuring range Y-axis: 1,400 mm, measuring range Z-axis: 500 mm, table width: 1,170 mm, table length: 2,120 mm, No reserve price – guaranteed sale to the highest bidder! Gtjdpexqqkfsfx Abrju The machine is being auctioned as part of a site closure. Bidding obliges the buyer to collect the machine within the specified timeframe: from 26.01.2026 to 29.01.2026! TECHNICAL DETAILS Travel X-axis: 800 mm Travel Y-axis: 1,400 mm Travel Z-axis: 500 mm Worktable dimensions: 2,120 x 1,170 mm Magnetic chuck dimensions: 600 x 200 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 3,000 x 2,400 x 3,500 mm Weight: 7,000 kg EQUIPMENT Magnetic clamping plate Workshop drawer cabinet with contents Various measuring tools (measuring pins and touch probe) Additional suitable accessories

Condition: ready for operation (used), Year of construction: 2021, operating hours: 20 h, functionality: fully functional, machine/vehicle number: SK02UXKP0365, measuring range X-axis: 550 mm, measuring range Y-axis: 600 mm, Auction of a Zeiss T-Scan Hawk with only 20 operating hours! TECHNICAL DETAILS Maximum measuring range: 550 mm x 600 mm Measuring accuracy: 0.02 mm + 0.035 mm/m MACHINE DETAILS Laser class: Class 2M (eye-safe) according to IEC 60825-1:2014 Operating hours: 20 EQUIPMENT Gtodpfx Abex Sqfnsrsu Notebook GOM Inspect software

Condition: ready for operation (used), Year of construction: 2019, General Data Measurements width 1481 mm Measurements depth 1975 mm Measurements height 2797 mm Machine weight 1570kg Movement Godpfx Ajx D Ngfobrstu X-Axis Movement 700 Y-Axis Movement 1000 Z-Axis Movement 600 This 3-axis ZEISS Contura 7/10/6 RDS was manufactured in 2019 and features a robust motorized CNC drive system with a maximum vector speed of 465 mm/s. It includes the ZEISS RDS-C articulating head and VAST XXT TL3 sensor, capable of scanning speeds up to 150 points/second. Ideal for precise measurements with a maximum workpiece weight of 730 kg. Consider the opportunity to buy this ZEISS Contura 7/10/6 RDS CMM machine. Contact us for more information about this machine. Application Types Measuring

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: 201310504039 623534 -9805-130, Technical characteristics: 📏 Measuring Range & Dimensions X-axis: 700 mm Y-axis: 1000 mm Z-axis: 600 mm Maximum workpiece weight: approx. 730 kg Table height: 850 mm Machine footprint: approx. 1600 × 2100 mm Height: approx. 2800 mm 🧠 Accuracy & Performance Length measurement error (MPE): VAST XXT: (1.8 + L/300) µm TP20/TP200: (2.2 + L/300) µm Probing error (MPE_P): VAST XXT: 1.8 µm TP20/TP200: 2.0 µm Scanning performance: Up to 500 points/sec VAST Navigator and Fly Mode for optimized path planning Gjdpfexxu Hgjx Abrotu 🔧 Sensor & Probe Options Probe head: ZEISS VAST XXT or RDS articulating head Stylus length: Up to 150 mm (TL3 module) Stylus weight: Max. 15 g Angular positions: 20,736 with CAA correction Optional sensors: ZEISS ViScan (optical) ZEISS LineScan (laser triangulation) ZEISS DotScan (white light confocal) 🌡️ Environmental Conditions Operating temperature: 17–35 °C Guaranteed accuracy: 18–22 °C Humidity: 30–60% (non-condensing) Vibration damping: Integrated passive system ⚡ Utilities & Control Power supply: 100–240 V AC, 50–60 Hz Maximum power consumption: approx. 800 VA Compressed air: 6–8 bar, max. 120 Nl/min Controller: ZEISS C99L with CALYPSO software Protection class: IP53 Machine status: WORKING

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 141447, Technical characteristics: Max. measuring range in mm X axis 500; Y axis 500; Z axis 500 Dimensions in mm Without base: length: 1160; width: 1080; height: 1803 With base: length: 1170; width: 1090; height: 2480 Mass of CMM in kg: without base: 350 with base: 445 Max admissible workpiece mass in kg: 100 Equipment consists of: Coordinate measuring machine (CMM) with base Control (integrated) Control console Software (Calipso 5.4) Documents Probing system Master stylus Reference standard Changer rack Machine status: WORKING Gedpfx Aexxvbrjbrjtu

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 202539, Technical characteristics: 📏 Measuring Range & Dimensions X-axis: 900 mm Y-axis: 1200 mm Z-axis: 700 mm Max. workpiece weight: ~1,300 kg Machine footprint: ~2,040 × 1,495 mm Height: ~3,030 mm Table height: 850 mm 🧠 Accuracy & Performance Length measurement error (MPE): Standard: 1.5 + L/350 µm Enhanced (Navigator mode): 0.9 + L/350 µm Probing error (MPE_P): 1.2 µm Scanning error (MPE_THP): 1.7 µm Form measurement error (RONt): 1.3 µm Gjdpfxexxvldj Abrjtu Repeatability (MPL): 0.7 µm Scanning speed: Up to 500 points/sec Acceleration: Up to 1.2 m/s² Max. vector speed: 520 mm/s 🔧 Sensor & Probe Options Standard probe: ZEISS VAST gold or VAST XTR gold Stylus length: Up to 800 mm Stylus weight: Max. 600 g Minimum stylus tip diameter: 0.3 mm Multi-sensor support: Optical (ViScan, LineScan), tactile (VAST XXT, RDS) 🌡️ Environmental Conditions Operating temperature: 15–30 °C Accuracy guaranteed: 18–22 °C Humidity: 30–60% non-condensing Vibration damping: Passive elastomer system ⚙️ Control & Software Controller: ZEISS C99L Software: ZEISS CALYPSO, HOLOS, GEAR PRO CAA (Computer-Aided Accuracy): Real-time dynamic correction Navigator technology: Automatically adjusts scanning speed for optimal precision Machine status: WORKING

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 202308, Technical characteristics: Gtedpfexxvkysx Abrsu 📏 Measuring Range & Dimensions X-axis: 900 mm Y-axis: 1200 mm Z-axis: 700 mm Max. workpiece weight: approx. 1,300 kg Machine footprint: approx. 2,040 × 1,495 mm Height: approx. 3,030 mm Table height: 850 mm 🧠 Accuracy & Performance Length measurement error (MPE): - Standard: 1.5 + L/350 µm - Enhanced (Navigator mode): 0.9 + L/350 µm Probing error (MPE_P): 1.2 µm Scanning error (MPE_THP): 1.7 µm Form measurement error (RONt): 1.3 µm Repeatability (MPL): 0.7 µm Scanning speed: up to 500 points/sec Acceleration: up to 1.2 m/s² Max. vector speed: 520 mm/s 🔧 Sensor & Probe Options Standard probe: ZEISS VAST gold or VAST XTR gold Stylus length: up to 800 mm Stylus weight: max. 600 g Minimum stylus tip diameter: 0.3 mm Multi-sensor support: Optical (ViScan, LineScan), tactile (VAST XXT, RDS) 🌡️ Environmental Conditions Operating temperature: 15–30 °C Guaranteed accuracy: 18–22 °C Humidity: 30–60% non-condensing Vibration damping: Passive elastomer system ⚙️ Control & Software Controller: ZEISS C99L Software: ZEISS CALYPSO, HOLOS, GEAR PRO CAA (Computer-Aided Accuracy): Real-time dynamic correction Navigator technology: Automatically adjusts scanning speed for optimal precision Machine status: WORKING