Cleaning machine

Mu Teks YM-850

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Working Speed 19 mm/s Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), Chjdjv Rwu Uopfx Aknjc two-hand operation

Condition: new, Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Chjdpfx Ashl H Ubjknec

Condition: ready for operation (used), Year of construction: 1991, Volume flow: 1550 m³/h Pressure difference: 1000 Pa Drive motor: 400 V, 2850 rpm, 1.5 kW Intake nozzle diameter: 150 mm Cedpfovitd Asx Aknehc Space required: 1100 x 500 x 2450 mm Weight: 133 kg

Year of construction: 2026, condition: as good as new (ex-display), Manual cleaning is performed using special gloves in the front section. The effectiveness of the cleaning process is ensured by a high-pressure pump and a special spray nozzle. In these devices, a temperature of up to 60°C can be set for the cleaning fluid. The pressure is adjustable from 1 to 80 bar. Technical data: Working area: 950 x 700 mm Internal height: 450 mm Load capacity: 70 kg, optionally up to 150 kg Spray pressure: adjustable from 1-100 bar Tank volume: 75 liters / heating power 2 kW Chsdpfx Akef A Nq Aonsc Standard configuration: • Frame, feet, lid, and housing made of stainless steel • Removable stainless steel sheets above the tank • Upward-opening flap with 2 handles and gloves • Window made of tempered glass • Door opening/closing system with gas spring assistance • Monitoring of door opening by means of a safety limit switch • Filter on the suction side of the pump (500 microns) • Foot switch for operating the cleaning pump • Interior lighting • Neoprene gloves, length 600 mm (chemical resistant) • Adjustable feet +/- 50 mm Optional: • Candle filter made of stainless steel with pump (10/25/50 microns) • External mini-pneumatic oil separator

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 16 A, type of input current: three-phase, volume flow: 6,000 m³/h, intake manifold diameter: 300 mm, total height: 2,000 mm, total length: 3,100 mm, total width: 900 mm, overall weight: 925 kg, compressed air connection: 6 bar, nominal flow rate: 5,100 m³/h, negative pressure: 2,700 Pa, Technical data: Suction nozzle diameter D = 300 mm Residual dust content < 0.1 mg/m³ H3 Filter area 28 m² Cleaning method: compressed air Volume flow 6000 m³/h Negative pressure 2500 Pa Sound pressure level 72 dB(A) Cjdpfx Aoyi Efcjknjhc Motor/fan 7.5 kW 400 V 50 Hz Operating mode: continuous operation Volume of chip collection container 3 x 165 l Weight approx. 1000 kg Dimensions (L x W x H in mm) 3070 x 900 x 1950 Scope of delivery: - Housing, pressure shock-resistant up to 200 mbar, - Chassis, - 3 filling containers for the SMU 6000.1, - Separator with filter, - Fan unit with discharge duct, - Compressed air or vibration cleaning, - Control cabinet with main switch, motor starter and automatic start, - Integrated fire extinguishing system, - Automatic cleaning initiation and integrated filter monitoring with indicator light, - 5 m connection cable with 32 A CEE plug, - Device plug with phase inverter, including frequency inverter workshop tested

Year of construction: 2004, condition: good (used), Newsmith Crate / Tray Washer Up to 800 crates / hour All stainless steel Wash pump with detergent or soap agent facility Rinse pump with rinse agent facility Adjustable wash temperature controls Drive conveyor with 3 speed control selector All safety controls and e-stops Gas burner (can be changed to oil) Complete with extractor fan Ready for use Chjdpsma E Hcjfx Aknec

Condition: good (used), Tool holder VDI 30 Chedpfxsww Hlue Aknec

Condition: as good as new (ex-display), Year of construction: 2008, machine/vehicle number: LSP 100T, Productions-Hydraulic press with H-column 100t with guidance Manufacturer: Stenhoj Denmark Year of construction: 2008 Pressure force max. 1,000 kN / 318bar Press cylinder, stroke length: 400mm Press table with T-slot 1,500x900mm above 1,500x1,050mm below Stand passage 1,700mm Condition as good as new, the machine was only used for test runs and has been in stock since then. Cjdpog Rn Efjfx Aknehc All statements without guarantee. Without transport costs.

Condition: like new (used), Year of construction: 2025, container length: 20 ft, color: grey-black, overall weight: 30,480 kg, maximum load weight: 27,380 kg, empty load weight: 3,100 kg, loading space volume: 31 m³, loading space width: 2,350 mm, loading space length: 5,898 mm, loading space height: 2,390 mm, 20' Open Side (Side Door) Shipping Container - Condition: ONE WAY - used once for sea freight with cargo - Exterior color: RAL7016 Anthracite gray - Weatherproof and waterproof - With valid CSC plate (for 5 years) - Cargo worthy - Available from depot in Hamburg / Delivery at extra cost OTHER COLORS: RAL5010 Gentian blue, RAL7035 Light gray CONTAINER CONSTRUCTION: - Double-leaf door with all-round rubber seal on the end face - Fully opening folding door on the long side - 12 x galvanized door locking bars - Walls made of corrugated steel sheet, 2 mm thick - 2x ventilation openings on the side walls - Floor made of coated plywood, 28 mm thick - Forklift pockets / spacing = 2055 mm - Built according to ISO standard CONTAINER DIMENSIONS: - External dimensions (L x W x H): 6,058 x 2,438 x 2,591 mm - Internal dimensions (L x W x H): 5,898 x 2,350 x 2,390 mm - Door opening (W x H): Width: 5,702 mm x Height: 2,154 mm - Volume: 31.1 m³ - Tare weight: 3,100 kg - Payload: 27,380 kg CONTAINER APPLICATIONS: - Additional storage capacity - Storage of materials and tools - Temporary storage during relocation - Transport container - Showrooms - Living container - Recreation rooms - Mobile kitchens + bars - Workshops - Technical rooms - and more OUR SERVICES: - Container sales: All sizes + types / New + used - Europe-wide delivery by truck / side loader / rail / inland vessel - Container repair - Container modification - Accessories + spare parts for containers PAYMENT TERMS: Prepayment: The invoice amount must be fully transferred to the specified bank account before delivery or service provision. The order will be processed after payment is received. Payment by bank transfer: The invoice amounts must be transferred to the specified bank account within 7 days after the invoice date. Payment by PayPal: PayPal payments are possible, subject to an additional PayPal fee of 2.49 percent. FURTHER INFORMATION: Invoice with VAT shown (19%). The containers are located in an empty depot in the port of Hamburg. Codpfxsgp Alhj Aknshc We distribute many other new + used containers of all types + sizes. We will gladly create a free, no-obligation quote for containers including delivery and any unloading. CONTACT US: We are always available to answer your questions! Container trade, shipping container, storage container, overseas container, deep-sea container, material container, warehouse container, construction site container, construction container, steel container, bar container, kiosk container, workshop container, event container, relocation container, archive container, freight container

Condition: new, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 4-6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ Innovative wet blasting technology for perfect surfaces – Efficient. Environmentally friendly. Safe. The future of surface finishing begins here: With wet blasting solutions from Proton Maschinenbau GmbH, you can rely on uncompromising quality, maximum occupational safety, and state-of-the-art technology. Whether manual or fully automated, our systems guarantee precise cleaning, effective deburring, and optimal preparation for coatings, painting, or further processing. Our wet blasting systems combine water, compressed air, and a suitable blasting media to create a highly effective cleaning process that offers clear advantages over conventional dry blasting: ✔ 100% dust-free operation thanks to the integrated jet pulse filter system ✔ Homogeneous, contamination-free surfaces – no chemical additives ✔ Gentle processing of sensitive materials without embedding blasting media ✔ Optimal results for degreasing, paint stripping, structuring, and cleaning ✔ Energy- and resource-efficient process, suitable for numerous blasting media ✔ Ideal for demanding industries such as aviation, medical technology, the automotive industry, or toolmaking Our portfolio includes, among others: 🔹 ST1 & ST5 – Compact manual wet blasting cabinets with precise foot pedal control 🔹 ST6 – Specialized machine for rim processing up to 26 inches 🔹 ST12 – Fully automatic drum system with recipe management and intelligent control 🔹 ST17 – Ergonomic system with rotating platform, wash basin, and transport trolley All machines feature: Chedpjwdpq Hsfx Aknec 🔧 Stainless steel housing with laser seam 🖥️ Intuitive PLC touch panel with programming and maintenance instructions 💡 LED interior lighting, safety features, and automated media return Areas of application: Cleaning aluminum or plastic molds, deburring precision parts, preparing implants or prototypes from additive manufacturing – we offer the right solution for every application. Proton stands for: 2-year warranty on manufacturing quality, 10-year spare parts availability, personalized consulting, and robust systems "Made in Germany." 👉 Discover the advantages of wet blasting technology now – and reach a new level of surface finishing.