Sewing machine

Müller Martini FK IV-S

Condition: used, Year of construction: 2018, Used machine Year of manufacture: 2018 Special feature: Machine for up to 100 mm edge height! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 running rollers for improved workpiece guidance - Edge feeding, synchronous with belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with knife (for cuttable edges) Ijdpfx Abowka S Iogstf - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1250 mm long - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber top - Digital counter for height adjustment - Direct glue application to the workpiece: drip-proof glue pot with glue supply from below and rapid heat-up time after standstill - Flush cutting unit: - for front and rear workpiece edges - automatic sensing at the workpiece - pneumatic cutting with knife for cuttable edges - Flush trimming unit - with vertical sensing and horizontal guidance - reproducible setting using digital counters - 2 powerful 0.4 kW high-frequency motors - stepless speed adjustment from 4000 to 18000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction nozzle Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper cutter with belt feed - Continuous workpiece support approx. 1800 mm long - Workpiece support rail, extendable by approx. 300 mm - Rotatable foil dispenser Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating capacity: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected load: 3.8 kW - Pneumatic connection: 6 Bar Dimensions (without foil dispenser): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Condition: used, machine/vehicle number: 63511, Kalenderstanze - Perfoartion- & Nutmaschine / Calender Punch - Perforiertion - Creasing Machine W. Kroll Gartenberg K80Serial-No. 63511 Arbeitsbreite / Working width max. 800mm Kalenderstanze 3:1 4x4mm mit Daumenlochung Calender Punch 3:1 4x4mm with thumb cut calendar punch Itedpfell A Tmjx Abgjf Nut- und Perforierwerkzeug / Creasing and Perforation tools Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: SEM126/TH46098, Automatic Carton Folder Gluer, Max open blank width: 1100 mm, Min open blank width: 126 mm, Max feed up length: 800 mm, Min feed up length: 60 mm Isdpfxsv Ipl Te Abgjtf Stock : Cartonboard up to 800 gsm, Corrugated up to E flute.Max belt speed i: 425 m/min Complete with : Bottom belt feeder, Back lifters with vibration for smooth and consistent feeding, Pre-breaking system, Small box attachment - allowing min 76mm open blank width, Crash-lock module, Bottom left hand side glue pot, Three belt carrier folding section, Heavy duty Double Trombone delivery, Compression belt section, HHS C-1100 8 B cold glue system, 4 x HHS glue guns, Remote control, Manuals and electrical diagrams.

Year of construction: 1996, condition: ready for operation (used), Built in 1996 Size max 480 x 320 mm Size untrimmed max 480 x 320 mm min 153 x 108 mm Size trimmed max 475 x 300 mm min 148 x 105 mm Product thickness max 13 mm Speed max 13.000 c/h Equipment gathering chain & feeder • 5 station gathering track & chain • 4 feeders 370 • 1 cover folder feeder 1528 stitching unit • stitching unit 390 • wire unwind device Itsdjd Eg Tuopfx Abgjf • thickness control/ plus-minus • 2 stitching heads three knife trimmer • three knife trimmer 360 knives • 2 sets of knives

Condition: excellent (used), Year of construction: 2004, operating hours: 18,990,620 h, functionality: fully functional, paper width (max.): 520 mm, paper height (max.): 360 mm, type of input current: three-phase, Equipment: documentation/manual, The machine is with console and are also a two-way print. Ijdpfewa Ulzjx Abgjtf

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) Isdpfxeuf Sy Ae Abgjtf - Press height: 230 cm (90.55 in.) - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Condition: good (used), Year of construction: 1989, 2-color "straight" offset machine with low-stack explanation; 48x66cm, last modified type of this model (= best) Isdpfxjtyqhqs Abgetf

Condition: used, Year of construction: 1980, machine/vehicle number: 14357, Perforations- und Rillmaschine - Perforation & Creasing machine Stewo K16/4Year ca. 1980 - Serial-No. 014357 Creasing width max. 700mm Electric operation Paper 80-250g Online-Video-Inspection by Skype-Video Iedpfsh Axkkex Abgjtf We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Size max 360x310 mm min 100x85 mm Number of stitches Standard 2-10 Staggered 2-5 Continuous 2-9 Stitching length 15.7mm Speed max 9000 c/h min 900 c/h Power requirements 1.8 kW (220/380V, 50Hz) Length 4744mm Width 1035mm Weight 3135 kg (approx.) Equipment Itodjwkufiopfx Abgsf • 1 set of tools • 1 set of electrical diagrams • 1 set of operator manuals • 1 spare part catalogue • standard equipment

Condition: used, Head & Tail Banding Machine with Gauzing Station Kolbus HL Year 1970 Format / Size min. 125 x 100 x 6mm / max. 370 x 270 x 80mm Leistung / Speed up to 36 cycles/min. Bestehend aus / Consist of: 1) Anleimstation / Gluing Station 2) Kapitalband- und Hinterklebestation / Head and tail banding station 3) Andruckstation / Pressure station Iedpfjv Ay Arsx Abgjtf Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test