Substations

NESTRO SCON

Year of construction: 2023, condition: new, In the field of 3D Thermoforming, we also offer presses, Turn over systems, film storage paternoster, and brushing machines on machineseeker! MEMBRANES for membrane presses Silicone and Natural rubber The highest quality silicone and natural rubber membranes for every membrane press (foil and veneer). POSSIBLITIES FOR DELIVERY: The membranes can be cut to the Required size or supplied by roll. SILICONE Type: MS-2 Colour: milky white Surface: textured/smooth width (standard): 1680/2000 mm polymer type: Silicone hardness: 50° Shore thickness: 3 mm temperature range: min. -50°C/max.200°C SILICONE Type: MS-1 Colour: milky blue Surface: smooth width (standard): 1600/1800 mm polymer type: Silicone hardness: 45° +/- 3 Shore thickness: 2 mm temperature range: min. - 60 °C/max. +230°C NATURAL RUBBER Type: MNK-2 Colour: grey Surface: smooth/smooth smooth/textured width (standard): 1700-1750 and 2000 mm rubber: Natural rubber hardness: 42°Shore thickness: 2.5 - 4.0 - 5.0 mm Lhsdjd S Efajpfx Agzor temperature range: min. - 20 °/max. +130°C NATURAL RUBBER Special two-part version for Waterbed / oil-presses Type: MNK-2 WB Colour: grey/black Surface: Both sides smooth width (standard): 1700 mm rubber: Natural rubber hardness: 42°/60°Shore thickness: 3,5 - 4 mm temperature range:min. - 20 °/max. +130°C Standard SILICONE Rubber Sheet Type RSS Colour: redbrown or transparent (other colours on request) Surface: both sides smooth Standard length: cut or 10m rolls (other lengths on request) Standard width: 1200 mm - up to 1800 mm on request Polymer: Silicone hardness: 30° - 80°Shore thickness: 0.5 - 10 mm

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Lodpfevvkfdjx Agzehr

Condition: used, Year of construction: 2011, operating hours: 26,920 h, IRB 6640-235/2.55 Ledpfxoim Si Ae Agzohr Construction year 2011 We can offer you this robot overhauled too!

Condition: excellent (used), Circular saw flat motor KATT 11 kW / 1450 rpm, flange Ø 200 mm, right-hand thread, second stub shaft for hydraulic pump drive with pulley 150 mm Ø, tested and with new bearings. Lhedpfx Agsh D Rt Aozjr

Condition: used, IDC000100 Complete sawmill - Valon Kone VK26M with infeed and outfeed conveyors - merry go around system - ARIVislanda KS12 37 kW x 2 Lhedpevgdy Asfx Agzor - ARI Slab saw - ARI KL10 split saw - Soderhamn Eriksson 519C, edger with chipper heads - Bruks Chipper 1300 Complete with control system and mechanization.

Condition: ready for operation (used), Year of construction: 1996, A Weimer pallet stacking machine with the necessary conveyor technology is available. Pallet dimensions min.-max. X/Y: 600mm-1600mm/500mm-1500mm, capacity: up to approx. 8 pallets/min., swivel gripper arms: 90°. Documentation available. On-site inspection is possible. Lodpfx Agetpct Eezehr

Condition: new, Year of construction: 2024, ♻ The MONSTER is a hybrid machine with two shaft PRE- SHREDDER P150 TWIN (with two reduction gearboxes) combined with one shaft SHREDDER SD90XL for efficient shredding of various types of pallets, styroform, plastic, waste, scrap and electrical devices. ✔ Power: 30 kW + 1x 5,5 kW-9,2 kW (shredder + pre-shredder) ✔ Shaft length: 870 mm + 1580 mm (shredder + pre-shredder) ✔ Shaft diameter: 270 mm + 355 mm (shredder + pre-shredder) Lhjdpfshwwplox Agzor ✔ Shaft RPM: 80-120 + 5,3-10,3 rpm (shredder + pre-shredder) ✔ Number of cutting knives: 2x19 + 12/12 (shredder + pre-shredder) ✔ Granulation: 10-50 mm ✔ Capacity: up to 60 pallets/h* ✔ Material: Pallets, styrofoam, electronic waste, plastics, wood,... ✔ Filling opening: 2072 x 1070 mm ✔ Dimensions L/W/H: 3,73/1,78/2,67 m ✔ Weight: 4200 kg 2 years warranty or 2000 working hours

Condition: used, Year of construction: 2013, 3D-Venjakob Perfect Air Jet painting line: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1.300mm - Max. part length 6.500mm - In U-shape with angle transfer Consisting of: 1. loading belt, length 3,050mm 2. free space für Sanding machine (only optional, not included in the price) 3. spraying machine VEN SPRAY PERFECT, length 5.510mm 4. flash-off dryer OIR, length 6,000mm 5. nozzle dryer VEN DRY AIR JET, length 4,160mm 6. angle transfer 180 degrees, with nozzle dryer 7. nozzle dryer VEN DRY AIR JET, length 5,160mm 4pcs. IR tubes 8. nozzle dryer VEN DRY AIR JET, length 5,160mm Lhedju Afu Repfx Agzsr 4pcs. IR tubes 9. nozzle dryer VEN DRY AIR JET, length 5.160mm 4 pcs, IR tubes 10. 3D UV dryer, VEN DRY UV, GA + HG 11. removal area, belt of the UV dryer Further information: On request

Condition: excellent (used), LOADER (BRIDGE-FRAME) WITH DOUBLE PICK-UP STATION Vacuum system (with its pump) No. 2 Vertical supporting columns of the top supporting beam No. 1 Horizontal top supporting beam (where the carriage slide on) No. 1 Motorized sliding carriage with horizontal metal arms No. 2 Out-side rollers way (on gound) to in-feed pile of panels to the Loader Out-side motorized rollers table (which receives panels from the Loader) Separate electric and command panel Perimetral safety metal grids Working capacity (cycles/min) 16 (ca.) Min/Max panels thickness mm 10 / 50 (ca.) Min dimensions of the panels mm 250 x 320 (ca.) Max dimensions of the panels mm 1300 x 3000 (ca.) Total installed motor power Kw 30 Lhodpofi Tg Hefx Agzjr

Condition: used, machine/vehicle number: 008011, X axis working area: 6200 mm Y axis working area: 1935 mm Lhjdjwu Af Eepfx Agzsr Working Table: Pod and Rail Main Electrospindle power: 10.5 KW Number of controlled axes: 4 axes Total number of drilling spindles: 40 Total number of tool changer positions: 22