Unloader

Pao Mac

Condition: used, Year of construction: 2018, Load capacity 350 kg, table height min. 757 mm, table height max. 1157 mm, table length 3000 mm, table width 1000 mm, length approx. 3010 mm, width/depth approx. 1040 mm, height approx. 1157 mm, recommended extraction capacity 2200 m³/h, number of extraction ports 3 x 220 V, extraction port diameter 140 mm, weight: 130 kg. Storage location: Nattheim. Lsdpfx Ajxnlavokqsah

Condition: new, working length 2451 mm Working width 2170 mm Working height 800-1000 mm Haberkorn return conveyor approx. 2,451 mm x 2,170 mm ----- base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor system for wood lengths from 300mm to 4200mm - Conveyor system for wood widths up to 240mm Roller conveyor - infeed - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG cross conveyor - Cross conveyor with 6 traverses - Conveyor belts PVC coated (green) 50mm wide, guided in plastic tracks - Continuously driven cross conveyor approx. 5 - 20m/min - Drive via geared motor 0.37kW - Approximately 1750mm lock to lock Roller conveyor - outlet - Continuously driven roller conveyor approx. 5 - 25m/min - Drive via gear motor 0.37kW, vertical shaft and PU round belt - Roll diameter 50mm, 240mm roll jacket length with PVC jacket - Transfer to cross conveyor by lifting - lowering the roller conveyor - Roller cover according to HBG ----- Conveyor belt approx. 320mm x 3500mm base frame - Steel tube frame 50 x 50 x 2 mm - Height-adjustable trestles (approx. 800mm - 1000mm) - Conveyor belt for wood lengths from 300mm to 4200mm - Conveyor belt for timber widths up to 240mm - Conveyor belt on castors with brake tape - Continuously driven approx. 5 - 25m/min - Drive via geared motor 0.37kW - Tape PVC coated 260mm wide - Stop on both sides approx. 15mm ----- Laedpfx Akji Hmpioqoh Steering: - Ready to plug in with its own controller and logic - Siemens PLC, 24VDC - Siemens frequency converter - Optical limit switches and emergency stop loop - Ready installed with 16A Euro plug - Connection: 400V AC, 2kW, 50Hz ----- Pneumatic: 6-8 bar, consumption approx. 16NL/min Colour: RAL 7035 light grey Basic EC Directive 2006/42/EC in accordance with 2006/95/EG Electrical Equipment (Low Voltage Directive) and 2004/108/EC EMC Directive ----- Price of the above version ex works: on request! plus packaging and transport costs ----- (Technical information according to the manufacturer without guarantee!)

Condition: excellent (used), Optimizing cross-cut system GreCon type 2004 with infeed cross conveyor with outfeed conveyor with 4 ejectors with chain bed Technical specification: Max. width of workpieces: 250 mm Max. Thickness of workpieces: 80 mm Diameter of saw blade: 450 mm Cutting speed: 90 m/sec. Saw motor: 5,5 kW Control saw shaft: pneumatic Lsdpfx Aken Hwl Asqsah Drive chain: servo motor Min. working width: 40 mm Min. input length: 500 mm Net weight: approx. 1.800 kg was overhauled and then no longer used Location: Austria, near Ried im Innkreis

Year of construction: 2025, condition: new, Dimensions (L/W/H) 2920x980x1450 mm Weight 1500 kg Lodpfxovz Hzrj Akqjah Total power requirement 11,5 kw

Year of construction: 1993, condition: good (used), motorised transport table with rollers and. var. speed dimensions L x W x H = 2950 x 1300 x 900 mm feed speed var. height adjustable +/- 15 cm max. weight load 50 kg/ m Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. Laodjgvvn Eopfx Akqsh • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: like new (used), Year of construction: 2018, operating hours: 800 h, functionality: fully functional, The machine is in like-new condition and has only 800 operating hours. CURSAL TRV 1200 E optimizing saw Year of manufacture: 2018 Laedezlbizjpfx Akqjh Saw blade diameter: 500 mm Maximum cutting height: 90 mm Maximum cutting width: 250 mm Adjustable feed rate, max. 195 m/min Saw motor power: 7.09 kW Infeed table length: 3000 mm – belt-driven feed Outfeed table length: 5000 mm – 3 ejectors/sorters Machine in very good technical condition – lightly used Full optimization – industrial computer/controller allowing programming of up to 128 independent work programs, supporting up to 16 width classes and 8 wood quality classes.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total width: 2,000 mm, total length: 6,000 mm, total height: 2,000 mm, film width: 250 mm, working height: 900 mm, overall weight: 1,200 kg, roll diameter: 700 mm, warranty duration: 6 months, Equipment: documentation/manual, This machine is a used edge-banding machine from the renowned manufacturer Barberán (model RP-30), equipped with a high-quality Düspohl piston melting unit. The system is specifically designed for the professional edge-banding of profiles and offers high flexibility in terms of the materials and adhesives that can be used. Key technical features: Application area: Ideal for the precise processing of wood and plastic profiles. Adhesive compatibility: Suitable for processing common hot-melt adhesives such as EVA, PO and PUR. Maximum working width: 250 mm for versatile profile geometries. Laodpfxezxh E As Akqsh Modern control system: Equipped with a clear control panel including a display for easy monitoring of process parameters. Efficient melting unit: The integration of the Düspohl piston melting unit guarantees a continuous and material-friendly melting process. The machine is in a ready-to-use condition and is perfectly suited for woodworking and plastics processing companies looking for a reliable solution for profile coating.

Condition: excellent (used), functionality: fully functional, Grecon Dimter Opticut S50 Optimizer Maximum material input length: 5000 mm Wood width min/max: 20-300 mm Laodpfjzaug Rjx Akqeh Wood thickness min/max: 10-100 mm Capability to cut bundles Defect cutting CE certified

Condition: used, Year of construction: 2016, machine/vehicle number: IDC000246, saw blade diameter: 700 mm, cutting height (max.): 225 mm, power: 13.5 kW (18.35 HP), Wood Optimizing Cross-Cut Saw Manufacturer: WEINIG / WEINIG DIMTER OptiCut S60 Year of Manufacture: 2016 (fully serviced in 2026) Professional optimizing cross-cut saw for precise and efficient wood processing. Applications: Pallet manufacturing Wooden packaging production Furniture manufacturing Ledpfx Akozkim Ssqsah Sawmills and carpentry workshops Technical Specifications: Max. cutting height: 225 mm Saw blade diameter: 700 mm Saw motor: 13.5 kW Positioning drive: 5.1 kW Material length: 400–6300 mm Material width: 40–300 mm Material thickness: 15–225 mm Finished length: 80–4800 mm Features: Automatic measuring and positioning Automatic feeding with 9-row cross conveyor Laser length detection Pneumatic workpiece clamping Touchscreen control Positioning accuracy up to ±1 mm Workpiece weight up to 250 kg High productivity and reliable WEINIG quality

Condition: used, Year of construction: 1991, machine/vehicle number: DS11, functionality: fully functional, power: 9 kW (12.24 HP), saw blade diameter: 370 mm, Equipment: saw blade guard, Manufacturer: Bäuerle Type: DS11 Year of manufacture: 1991 Laodey Tphkspfx Akqsh Power: 2 x 4.5 kW Saw blade diameter: 370 mm Length measuring system (automatic): Shortest dimension: 225 mm Longest dimension: approx. 1900 mm