Electric - Transporter

PEFRA 3232

Condition: reconditioned (used), Year of construction: 1995, operating hours: 18,000 h, functionality: fully functional, overall weight: 7,500 kg, rotor diameter: 370 mm, number of blades: 71, rotor length: 2,500 mm, power: 75 kW (101.97 HP), rotational speed (max.): 130 rpm, filling opening width: 1,450 mm, filling opening length: 2,500 mm, year of last overhaul: 2026, warranty duration: 12 months, input voltage: 400 V, blade width: 40 mm, Intake length: 1450 mm Intake width & rotor length: 2500 mm ᴓ rotor: 370 mm nº of cutters: 71 un (40x40 mm) Rotor speed: 118 rpm Motor: 75 kW Voltage: 400 V Bdedpfjrrhczsx Afaoi Frequency: 50 Hz ᴓ screen: 30 mm Machine weight: 9000 kg Machine in operation

Condition: repair required (used), Year of construction: 2003, operating hours: 12,500 h, functionality: not functional, Hammel VB 850 E stationary with magnet + 2 pairs of new shafts Machine is without gearbox. Bdodpfjyt Iawox Afaei

Condition: used, machine/vehicle number: 1379A, mileage: 1,638 km, power: 179 kW (243.37 HP), first registration: 11/1986, fuel type: diesel, overall weight: 15,322 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Equipment: ABS, all wheel drive, compressor, parking heater, trailer coupling, TUV is made NEW!!! So-KFZ registration , The AM General in a really good condition directly from the Army , Well maintained and maintained, the body is in a super good condition (vehicle from the reserve) , The M944A1 is equipped with: All-wheel drive, 5-speed automatic transmission, transfer case with stowage and off-road gear, power steering (super smooth), air brakes with ABS, 3 front seats, the body has the dimensions: L/W/H 5550 / 2200 / 2200.e L/W/H 5550 / 2220 / 1910mm inside, equipment of the body: lathe, tool cabinet with drawers, grinding stand, welding unit, permanently installed power generator 110 Volt 31KVA driven by vehicle engine (Cummins with 105 operating hours) via auxiliary drive, 2-piston compressor with compressed air tank, air connections in the body, trolley, loader, impact wrench large and small, grinding witch, air connections in the body, trolley, loading device, impact wrench large and small, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch, grinding witch. and small, grinding witch, magnetic drill, vice, large auxiliary heating and ventilation, many sockets, interior lighting, both sides and the rear of the body can be opened, the km are miles, driving license class 2 (truck), tire size 14.00R20 (very good condition) tubeless, top speed 90 km / h, displacement 14011cm? , , 24Volt power supply , The M944A1 has not only Tuv, but also drives reliably :-) can also be insured cheaply as a young timer AM Generalist also already for conversion as a motorhome and long-distance traveler, . All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal Bodpfx Aoqx Sxasfajdi

Condition: used, machine/vehicle number: 5063, Attachment: Used decanter/centrifuge Manufacturer: KHD Model: Full-casing screw centrifuge Type: CP 3-0.1 Machine no.: 5063 Maximum permissible speed: 2950 rpm Inner diameter of drum: approx. 530 mm Drum wall thickness: 12.5 mm Drum material: W 2 Gearbox: internal hydraulic gearbox Hydraulic drive: Rotodiff and pump unit (Viscotherm, Pump Unit C11-25Z/HP) Total weight: 2400 kg Bsdpfeddzm Tex Afajdi Purchase and rental possible.

Condition: refurbished (used), Year of construction: 1995, functionality: fully functional, power: 367.75 kW (500.00 HP), filling opening width: 700 mm, filling opening length: 1,200 mm, rotational speed (max.): 1,050 rpm, rotational speed (min.): 950 rpm, - Engine: Deutz 500 HP - Fill opening dimensions: 1200x700 mm - Rotor: 4 shafts and 40 stars - 950-1050 rpm - Throughput: 4-6 t/h Bdsdpfx Afsy I Uwajaji - incl. new spare rotor & stars - completely overhauled & modernised

Condition: good (used), 1 used radial drilling machine manufactured by Stimin type GR 820 H No. 773 year 2004 Technical data: Drilling capacity 80 mm Bjdpjtzctmjfx Afaodi throat 1600 mm Drill spindle holder MK 6- drill spindle stroke 390 mm Spindle speed, 24 steps 20 - 1400 rpm Clockwise and counter-clockwise rotation Feed rate, 12 steps 0.045 - 1.5 mm/rev Drive 400 V / 14.5 kva Clamping of the arm and drilling unit electromechanical Distance machined machine bed - drilling quill min. approx. 400 mm max. approx. 1800 mm usable machine bed with 4 T-slots 1170 x 2185 mm Coolant device 2 clamping tables Space requirement approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8500 kg

Condition: used, mileage: 218,500 km, power: 84 kW (114.21 HP), first registration: 06/2021, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 06/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,980 mm, loading space length: 4,250 mm, Year of construction: 2021, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Special equipment: 3-button remote control for central locking, DAB tuner (digital radio reception), roof light in the load compartment with door contact, entry handle on rear right C-pillar, driver assistance system: active brake assist, vehicle without lowering function, rear doors (opening angle 270 degrees), wooden flooring in load compartment, cable duct at rear portal, cable duct on side wall, multimedia system MBUX (7" touchscreen), reversing camera, entry step at rear door, paneling in load/cargo compartment: high wood (up to roof), fleece battery 92 Ah Bodsyb Uzwspfx Afasdi Additional equipment: 3rd brake light, storage compartment above windscreen, storage compartment below dashboard on passenger side, adaptive brake light, driver airbag, traction control system (ASR), washer fluid level indicator, electrically adjustable and heated exterior mirrors, both sides, outside temperature display, automatic headlights on, entry handle for sliding door at load compartment partition, electronic brake-force distribution (EBD), driver assistance system: Crosswind Assist, suspension: Stabilization Level I, body/build: high-roof panel van standard, keyless start, child safety lock, communication module (LTE) for digital services, fuel tank: main tank 71 liters, continuous bulkhead in load compartment, steering wheel (mechanically adjustable steering column), headlight leveling, side marker lights, Mercedes-Benz emergency call system, engine 2.1 L - 84 kW CDI CAT, wheelbase 4,325 mm, low emissions according to Euro 6, sliding door right in load/passenger compartment, driver's seatbelt system with warning device, seat cover/upholstery: fabric, seats in cab: adjustable passenger seat, seats in cab: adjustable driver's seat, steel wheels 6.5x16, engine start/stop system, service interval indicator Assyst, heat-insulating glazing, permitted gross vehicle weight 3.50 t

Condition: used, Year of construction: 2003, operating hours: 2,180 h, * Unladen weight: 7,090 kg * Power: 3.6 kW * Year of manufacture: 2003 * Working height: 15 m * Electric drive Bdodpfjumrvbjx Afaoi -----Internal vehicle number: 10013----Subject to errors and prior sale. WhatsApp support available! If you have questions about the vehicle or for further information, feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Dimter / Weinig OptiCut 450 Quantum Optimizing Cross-Cut Saw Manufacturer: Dimter / Weinig Model: OptiCut 450 Quantum Year of manufacture: 2006 Machine description: For sale: Dimter / Weinig OptiCut 450 Quantum optimizing cross-cut saw, year 2006, designed for high-speed and precise cross-cutting of timber with yield optimization. The Quantum version is one of the top models in the OptiCut 450 series and was developed for industrial use with extremely high output, precise positioning and reliable material transport. The machine is suitable for fixed-length cutting, defect cutting and production optimization. The OptiCut 450 series was designed for integration with scanners, sorting systems and automatic handling equipment. Typical Quantum features include VarioSpeed infeed, HighGrip feed rollers, an independent length measuring system and a servo-controlled intelligent waste gate. Technical data: - capacity: up to approx. 540 cuts/min - feed speed: approx. 300 – 415 m/min - maximum workpiece length: approx. 6.3 m - saw blade diameter: 450 mm - maximum cutting width: 235 mm - maximum cutting height: 100 mm Bdodeyu Urijpfx Afaei - working height: 900 mm - motor: 7.5 kW - air consumption: approx. 1200 NL/min - cutting accuracy in the OptiCut 450 series: approx.± 0.8 mm Features / advantages: - extremely high cutting performance - high positioning accuracy - VarioSpeed system reducing gaps between boards - HighGrip rollers for secure material transport - servo-controlled waste gate - suitable for integration with scanners and sorting lines - proven Weinig / Dimter technology for continuous industrial production Condition: very good Note: Technical details may vary depending on the exact machine configuration, control version, handling equipment and installed options.

Condition: used, mileage: 1,702 km, power: 17 kW (23.11 HP), first registration: 04/2015, fuel type: diesel, overall weight: 1,550 kg, color: green, gearing type: automatic, suspension: other, number of seats: 4, operating hours: 1,702 h, Equipment: all wheel drive, trailer coupling, HU/AU new, diesel, automatic, all-wheel drive, first registration 20.04.2015, 17 kW, 854 cm³, 1,702 operating hours, 4-seater, trailer coupling, tilting cargo bed, permissible gross weight 1,550 kg. FOR US, CONDITION AND FEEL ARE DECISIVE; PRICE IS SECONDARY. For further questions, Mr. Faller is available at the provided number. //*TRADE-IN, PART-EXCHANGE, OR SECURING A LOAN WITH YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information provided without guarantee.* Further offers can be found on our homepage. The description and stated information do not constitute a guarantee and are non-binding. Only the purchase contract concluded at the dealership upon vehicle purchase is binding. Errors and prior sale reserved! Bdedpfx Asx Hz Amefaoi