Stack lift

Polar L 600-G-3

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats Phedpfeh Nrh Usx Agzja A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Year of construction: 2025, condition: new, SEMI AUTOMATIC PASTING MACHINE Podpfx Asgnlv Dsgzeha MODEL; MAGRAFKA-100 YEAR; 2025

Year of construction: 1993, condition: used, Size max 470 x 320 mm Size 152 x 127 mm Pedpfx Ajc Rntnjgzeha Speed max 18.000 c/h Pile height 235 mm Pile height pre-loading cage 124 mm

Condition: excellent (used), Year of construction: 2016, operating hours: 27 h, SBL 1060 SE Year: 2016 Sheet feeder: Manual non-stop pile feeder Material range: Paper and board from 470 × 350 mm to 1060 × 760 mm Max cutting format: 1050 × 740 mm Min sheet size: 470 × 350 mm Max sheet size: 1060 × 760 mm Max cutting pressure: 300 tons Material thickness: 0.1 – 2 mm (corrugated/laminated max 4 mm) Min gripper margin: 9.5 mm Max inside chase size: 1155 × 852 mm Cutting plate size: 1076 × 756 mm Max speed: 8,000 sheets/hour Power consumption: Total 32 kW (22 kW + 10 kW for lower plate heating) Machine dimensions (L×W×H): 5,900 × 5,700 × 2,615 mm Max pile height – feeder (with pallet): 1,750 mm Max pile height – delivery (with pallet): 1,450 mm Feeder Section - Pneumatic feeder table - Non-stop manual feeder system - Anti-static system - Pre-pile device - Manual suction group adjustment Phsdpfewypp Isx Agzja - Micrometric suction adjustment - Motorized side pile adjustment - Suction belt feeder table - High-pressure lubrication pump - 2 pneumatic side register guides - Electronic control of front and side register Cutting/Embossing Section - Automatic pressure adjustment up to 300 tons - Preparation and introduction table for die frames in platen - 2 quick-lock die chase frames with bottom plate - Pneumatic locking of the chase and lower supporting plate - Centerline System - Micrometric system - Heated lower support plate (24 mm) - Cutting plate: 4 mm - Compensation plate: 3 mm - Archiveable 1 mm thin cutting plate Stripping Section - Quick lock for upper and central stripper frames - 2 standard upper stripper frames - 2 standard lower stripper frames - Double accessory kit for lower stripper prep (pins, bars, clamps, etc.) Delivery Section - High-pile automatic non-stop delivery with conveyor - Guillotine for automatic removal of gripper margin waste - Sheet deceleration device - Tab insertion device

Condition: used, Year of construction: 2010, Halb-automatische Winkeleinschweißmaschine - Semi-Automatic Foil sealing machine ROBOPAC ARIANE 5040 2TMYear 2010 - Serial-No. KN 096776 Mobile on mobile frame After sealing - automatic transport into tunnel Sealing frame max. 500 x 400mm Height adjustable working table Phsdjq Sbqcopfx Agzja Shrinking tunnel with conveyor Film carriage on railsDimensions of tunnel arc 544 x 387 x H 190mm Overall dimensions 1900 x 900 x Ht 1300mmSehr guter Zustand - TOP Condition Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: good (used), Year of construction: 2002, Built in 2002 Size: max 310 x 400 x 80 mm Size trimmed: max 300 x 388 x 80 mm; min 100 x 120 x 2 mm Speed: max 6.000 c/h Feeding height: max 80 mm Air requirement (6 bar): 30 m³/h Length: 2.300 mm Width: 2.200 mm Height: 2.500 mm Weight: 5.700 kg (approx.) Phedpfxopgwaue Agzsa Equipment copilot right hand infeed electronic counter 2 sets of knife holders 2 set of knives equipment for changing the format: 1 set of pressing plates & holders 1 set of size extensions 1 set of quick change tables 3 sets of cutting sticks Motorische Formateinstellung automatic setting from: - infeed device - book block pressure - cutting table - side knives - side gauges central lubrication standard accessories

Condition: used, Year of construction: 1991, machine/vehicle number: 6172025, Palettenheber mit Wanne / Pile Hoists - Stack Lift Polar L-1000-W-3Baujahr / Year 1991 - Serial-No. 6172025 Format / Size max. 1100 x 750mm Hebekapazität / Loading capacity max. 1000KG Hubhöhe / Lifting height max. 1400mm Podpfx Asn Aw Ugogzjha Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Year of construction: 1971, condition: ready for operation (used), machine/vehicle number: 713406, -KOM 105- Offered here is a grinding machine from the company Kehren & Co with a filter system from the company FAUDI. This is a segment grinding machine with vertical grinding spindle. The machine has 2 grinding tables/magnetic plates for pendulum machining. Technical data: Grinding machine: Psdsg Nt A Ejpfx Agzeha Manufacturer: Kehren & Co Type: D7B Year of manufacture: 1971 Make No: 713406 2 grinding tables/ magnetic plates with 700mm diameter. Grinding method: segment grinding Control: Marposs weight: 6.600kg Filter system: Manufacturer: Faudi - Filtersystems Type: AFB 1,3 / 1001 Year of manufacture: 1992

Condition: ready for operation (used), Size: max 750 x 1.050 mm Podpfx Asd N D Nvjgzjha min 40 x 75 mm section height: max 165 mm Stroke height :1.300 mm lifting capacity: 200 kg Power requirements: 3,1 kW (220/380V, 50Hz) Width: 1.425 mm Depth: 2.970 mm Weight: 850 kg (approx.)

Condition: used, Year of construction: 2003, - Folding stations: 1st folding unit with 6 pockets (parallel fold) - Folding stations: 2nd folding unit with 4 pockets (parallel fold) Pedpowv D Svofx Agzoha - Folding stations: 3rd folding unit with 2 pockets (parallel fold) - Max. sheet size: 520 x 840 mm - Min. sheet size: 105 x 148 mm - Max. speed: up to 30,000 sheets/hour (depending on fold type and material) - Paper weight: 40 – 250 g/m² - Folding types: single fold, roll fold, zigzag fold, double parallel fold, and more - Feeder: flat pile feeder (PBA) - Control: electronic control with folding program memory - Delivery: shingle stream delivery (STA) - Optional: perforating, creasing or cutting units (depending on configuration) - Format adjustment: manual - Machine dimensions (L x W x H): approx. 2,800 x 1,200 x 1,400 mm - Weight: approx. 1,000 – 1,200 kg Special features: - Robust construction with high precision - Suitable for small and medium print runs - Ideal for commercial printers and finishing companies 1 punching tool NE 515 SBP 46-2 vertical sheet delivery, year 1992