3,0 kW piston compressor

RENNER REKO 510-B

Condition: used, Column Drilling Machine ALZMETALL Type AB 3 ESV Machine No. 15967 Year of manufacture 1977 Drilling capacity: 32 mm Spindle taper: MT 3 – short quill Distance spindle nose – table: 545 mm (short quill) Distance spindle adapter – table: 395 mm (MT adapter) Fedpeharwvsfx Ahneph Throat: 290 mm Quill stroke: 160 mm Table size: Ø 545 mm Column diameter: 220 mm Spindle speed: 55 – 1450 rpm, stepless Motor power: 1 / 1.6 kW Supply voltage: 380 Volt, 50 Hz - Spindle speed via 2 gearbox stages, 2 motor speeds and stepless through variable-speed drive - Intermediate gear stage for high torque at low speeds - MT adapter from MT3 to MT4 - Automatic feed 0.1 – 0.2 – 0.3 mm/rev - Swiveling drill table - Table height adjustment via hand crank - Heavy machine base with machined workpiece support surface (not original Alzmetall) - Work area lighting Space required (L x W x H): 1150 x 650 x 2000 mm Weight: 850 kg Good condition

Condition: used, turning length 500 mm turning diameter over bed 297 mm turning diameter over slide rest 160 mm spindle bore 36.0 mm tool adaptor DIN 55022 Gr. 5 quill: 3 MK quill travel 90.0 mm turning speeds 30 - 3550 U/min motor speeds: 1410 / 2830 U/min total power requirement 3.3 kW voltage 380 V weight of the machine ca. 620 kg. range L-W-H 1420 x 700 x 1200 mm from a vocational school - very good condition (!!) regularly receive a WEILER factory service particularly suitable for medium-precision turned parts Fpjdexaciropfx Ahnoh Equipment: - robust lead/pull spindle lathe - KLOPFER four-jaw chuck Ø 140 mm - KLOPFER three-jaw chuck Ø 140 mm - collet holder with lots of collets - foldable lathe chuck guard - chuck key - MULTIFIX steel holder A, with 3x new inserts - movable tailstock - adjustable bed stop - control panel, front left - automatic feeds for face and top support - pole-changing drive motor - machine base frame, with cabinet door (storage area) - chip splash guard rear wall - emergency stop button, bottom right - machine swing feet - original operating instructions

Condition: used, Year of construction: 2022, operating hours: 372 h, fuel type: diesel, motor manufacturer: 4045HP551-SV, Field of application: Construction Empty weight: 2.960 kg Generator capacity: 110 kVA Frequency: 50 Voltage: 230 Water tank volume: 1100 l Transport dimensions (LxWxH): 3640x1200x2295 Please contact Sales Department for more information Over 80 years experience in maintenance. Expert that jointly reflects on the ideal solution for your situation. 1,000 hours or one-year guarantee: optimal reliability. Available 24/7. Quickservice. Fpjdpfjwgvq Eex Ahnjh We can always supply a replacement generator. Wide range of stock that can be supplied immediately.

Condition: good (used), NHH lathe Fpedpfeqgdkisx Ahnjh Type: 1N611N Turning diameter bed: 260 mm Turning diameter support: 160 mm Spindle bore: 26 mm Turning lenght: 600 mm Digital measurement Diameter faceplate: 155 mm Speed: 2000 RPM Dimensions: 150x85x155 cm LxWxH

Condition: repair required (used), operating hours: 2,100 h, New Holland T6.155 tractor after rollover. Starts and drives, 2100 hours. Fodpfxjyl S S Ue Ahnoph

Condition: excellent (used), Year of construction: 2000, roll diameter 420 mm throat 400 mm workpiece height 280 mm saw band length 3200 - 3400 mm table - swivable +/- 20 ° Fpjdpfxjxcp Sfe Ahnjh table surface area 600 x 600 mm table - tiltable +/- 45 ° total power requirement 1,7 kW weight of the machine ca. 0,5 t dimensions of the machine ca. 1 x 0,7 x 1,9 m

Condition: new, Vertical band saw machine Make: METALLKRAFT Model: VMBS 1610 Article no. 3951610 Condition: New machine cutting speed 20 - 1000 m/min Accessories: - Belt welding machine Fodpshy Tcqsfx Ahnoph with shear and grinding motor - machine light - 2-speed gearbox infinitely variable - chip blowing device - rip fence - instruction manual

Condition: good (used), Year of construction: 2006, functionality: fully functional, load capacity: 170 kg, arm reach: 2,700 mm, Model: KR 200 L170-2 comp Condition: USED Fpjdpfx Asq A Uq Uohnoh Year: 2007 Controller Cabinet: KRC2 ed05 Included: Manipulator + KRC2 ed05 Control Cabin + All Wire Sets + Teach Pendant Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with the brands of KUKA, ABB, FANUC and Motoman.

Condition: new, Year of construction: 2026, Yanigav Pile Driver RE800GIII • Weight: 1200 kg • Dimensions (W x H): 2.00 x 2.60 m (transport position) • Blow frequency: 670–1500 blows per minute • Impact energy: 280 Joules • Bell inner diameter: 120–150–200 mm • Pile length up to 3 m Fsdpfx Ahsr Ezhyonjph

Condition: used, Year of construction: 2015, operating hours: 3,934 h, power: 103 kW (140.04 HP), front tire size: 420/85R30, rear tire size: 650/65R38, Speed: 40, First registered: 03.02.2015, / Compressed air system (2-circuit), three-point / / Rear linkage, lifting roof, / Rotating beacon / _____ / 01A2L 1 6140R All-wheel tractor / Germany / 1002 Fodpfx Ahsqrrn Sonjph