Lathe

NHH 1N611N

Condition: used, Year of construction: 1977, centre height 200 mm Hjdoyv N Rkjpfx Aihjfn centre distance 1.000 mm spindle turning speed range 1600 U/min spindle bore 42 mm turning length 1600 mm turning diameter over bed 410 mm 230 mm machine weight ab. 1.700 kg dimensions 2000 × 1000 × 1500 mm

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, General Control system: SIEMENS 840 D Main spindle Bar capacity: 60 mm Speed: 6000 rpm Power: 29 kW Torque: 140 Nm Synchronous spindle Technology: Mounted on the turret Mount: Collet chuck, D = 42 mm Hfedpozgcp Sjfx Aihen Maximum speed: 4,500 rpm Turret 1 (X/Z) Technology: Tool turret with 8 stations Tool holder: For DIN 69880 - 25x48 mm Maximum speed: 6000 rpm Power: 3.3 kW Maximum torque: 7.5 Nm X-axis: 90 mm Z-axis: 280 mm Turret 2 (X/Z) Technology: Tool turret with 6 stations Tool holder: Symmetrical dovetail mount Speed: 4,500 rpm Power: 4.2 kW Torque: 7.5 Nm X-axis: 81 mm Z-axis: 80 mm Equipment Chip management: Hinged belt chip conveyor Coolant management: Coolant pump, 8 bar Part removal: Workpiece removal device Bar loader: Bar loader magazine LM 3200 Ejector: On the synchronous spindle

Condition: used, Year of construction: 2004, Technical details: x-travel: 1500 mm y-travel: 1000 mm z-travel: 1000 mm control for program: TNC 530 spindle hours: noch nicht bekannt h milling head speed: 1: 30 bis 930 und 2: 930 bis 4000 / steples U/min tool taper: horiz./vertical: SK 50 (DIN 69871/Din 69872 Form A) max. torque on the spindle: 1000 Nm Hfsdeu Nc Rijpfx Aihon spindle head swivable left - right: 90 ° feed: 1 - 6000 mm/min feed power: 30 kN kN rapid traverse: 15 m/min Number of tools: 1 St. table clamping surface LxW: 1600 x 800 mm table load: 40 kN kN voltage: 400 V / 50 HZ V total power requirement: 42 kW Weight approx.: 15,2 t compressed air: 6,3 bar dimension machine xH: 3,1 x 4,7 x 2,6 m dimensions: Kühlfilter: 1,9 x 1,6 x 1,4 mm space requirements approx. LxWxH: ca. 38,5 m² m² Applications: Milling, drilling; tapping, boring. with direct coded length measuring systems the guideways of the 3 axes are on flat guideways CTS and external cooling Milling head position controlled +/-90° milling spindle nominal drive power 22 kW with integrated hydraulic power unit up to 100bar operating pressure with coolant unit with filtration, with high pressure pump 60 bar (internal cooling), nominal delivery 20 l/min. and low pressure pump 4 bar (external cooling) as well as spray gun Hinged belt chip conveyor DGS, type SSF 600 P50 Accessories: Measuring probe SK40 Reference tool SK40 Milling head SEMPUCO *

Condition: new, Year of construction: 2026, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 2,000 mm, table load: 8,000 kg, spindle diameter: 105 mm, table length: 1,500 mm, table width: 1,500 mm, rotational speed (max.): 3,500 rpm, RET10X, 2026 ■ HORIZONTAL BORING MILL – T-TYPE ■ PRODUCER: RETOS VARNSDORF ■ PRODUCTION YEAR: 2026 ■ CONDITION: NEW Hsdpfjfk I Nkjx Aihsfn ■ WARRANTY: YES ■ IN STOCK SPECIFICATION ■ HEIDENHAIN TNC 640 control system ■ HEIDENHAIN drives and SIEMENS motors ■ Rolling guideways for all axes ■ Ram headstock ■ B axis interpolation controlled ■ Ready for cooling through spindle axis and automatic tool changer ■ can be equipped with other optional accessories - delivery on request

Condition: as good as new (ex-display), Year of construction: 2023, Container rotating device, 10-ton lifting capacity Speed: continuously adjustable Hand and foot remote control Diameter: 320mm to 2800mm Roller diameter: 300mm Speed: 6 - 60 m/h Hsdpfx Aisd Nmx Tjhjfn Power: 2 x 0.55 kW

Condition: new, Year of construction: 2026, Miter saw and cut-off saw, type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Machine operated via handwheel and worm gear (rear) Tilting Saw blade diameter: 520 mm, saw blade arbor bore: 50 mm Hodpfx Asi Dfideihsfn Saw blade speed: 2800 rpm 400 volts / 5 KW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: when tilted: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees when tilted: 140 mm The saw can be tilted to an acute angle of approximately 25 degrees on one side and tilted flat to the left up to 30 degrees. Machine weight: approx. 250 kg Location: Available from stock in 54634 Bitburg - immediately available -

Condition: reconditioned (used), Year of construction: 1998, Tool Grinder Make: Deckel Model: S0 Year of manufacture: 1998 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey Machine no.: 26230 Warranty: 12 months single-shift from delivery. For machines located outside our North Bavarian sales area, travel costs are to be covered by the customer. Hsdpfxoy Drkcs Aihjfn Accessories: - Grinding wheel with flange - Operating manual Including new electrics On/Off switch in new enclosure with undervoltage release coil to provide restart prevention (e.g. in case of power failure or unplugging the machine) Sold as seen Technically, the machine corresponds to the state of the art at the time of its year of construction.

Condition: good (used), Manufacturer: STANKO Type: 7D430 Year of manufacture: 1994 Table rotation 360° Head tilting possible up to 10° Big cabinet with slotting key way tools Lubrication Completely overhauled in 1994 Hfsdpfx Aiowpud Ajhen Specifications Metric US Standard Table diameter Ø 630 mm Table load 1000 Ram displacement 320 mm X - Axis 650 mm Y - Axis 510 mm Outreach 500 mm Number of strokes 3 - 38 m/min min. Power 12 kW Dimensions (estimated) Length 3000 mm Width 2200 mm Height 3000 mm Weight 6150 kg Please note: The information on this page was provided to the best of our knowledge and ability by us, and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representation and contractual terms. We recommend that you verify all important details.

Condition: new, cutting diameter 355 mm Hfedpemhm Aqefx Aihjn dimensions of saw-band 3770 x 34 x 1,1 mm cutting speed 20 - 80 m/min cutting width 490 x 280 mm 290 mm Impact energy 250 mm 230 mm 180 mm connected load frequency 400 Volt total power requirement 2,2 kW weight of the machine ca. 0,7 t dimensions 1,43 x 0,72 x 1,7 m Semi-automatic miter band saw - Miter cuts up to 45° left + right - Miter cuts up to 60° right - Vice with quick release device - Tape tension control via manometer - Electr. automatic cooling

Condition: good (used), Rolling width: 2050mm Rolling thickness 3x toproll Ø:18mm Hfsdpfowtpgtjx Aihon Rolling thickness 5x toproll Ø:21mm Rolling thickness prebending: 12mm Top Roll Ø: 280mm Side roll Ø: 260mm Number of rolls: 3 Rolling speed: 0-5 Adjustiment lower roll: 0-150mm/min. Adjustment side rolls: 0-150mm/min. Top support: yes Power: 12kW Length: 3000mm Width: 1500mm Height: 1600mm Weight: 5200kg