Sawmill line, pallet production

Skywood MS-1600LTRA

Condition: new, Year of construction: 2024, Boring and inserting machines Rilesa Vlg 2200 new 2023 Make: Riles Model: Vlg 2200 Description: Condition: new Year: 2023 Start type: to be agreed Cost of delivery: Customer cover Conditions of delivery: OWN RECEIPT Category: Ksdpfx Asgbpmhsh Njdp Machine Tools equipment in Poland Subcategory: Drills Subcategory 2: Drilling machines Description DRILL DRILL WITH STORAGE 8 DRILLING UNITS TWO FRONT RIGHT AND LEFT, 3 UPPER AND 3 BACKS Year: 2023 new

Condition: like new (used), Year of construction: 2015, functionality: fully functional, type of input current: three-phase, power: 45 kW (61.18 HP), input voltage: 400 V, For sale Spanner Biomass cogenerator station with 9 units. Model - BHKW45-8,0-V1.1 Year - 2015-2017 Nominal power - 6x45KW, 3X50KW Voltage - 400V Frequency - 50HZ Current - 3 phase Engine - 8.0L Price shown per unit. 1 unit includes: Biomass gasifier, generator that converts the gas with engine to electricity, separate control cabinets for gasifier and generator. Price is discussable. Kdjdpfx Ahsvcbtrs Nep Please see attached documents. Preferred text communication via e-mail or whatsapp.

Condition: excellent (used), Weinig four-sided planer max planing width 230mm max planing height 120mm 5 heads, bottom-5,5KW; left and right-11KW, top-11KW, bottom-5,5KW feed - 4KW fully adjustable heads electrically adjustable up and down and planing width 40mm spindles feed on gimbal rollers, with smooth adjustment WEINIG brand solid planer, Kedporigxyofx Ah Njdp length of the machine 415cm machine checked in original condition

Condition: excellent (used), functionality: fully functional, Söderhamn small log line with Euromill profiles Debarker Cambio 45 with infeed and guide work after 2D scanner Söderhamn 447 infeed 240-12 chipper canters Block tilt and infeed Kodpewp E E Djfx Ah Nodp 240-12 chipper canter Euromill profiles Board separator with adjustable center Chip conveyor under saw line Hydraulic units and electrical cabinet.

Condition: used, Year of construction: 2006, Kahl Twin Screw Extruder is a machine manufactured by Kahl in 2006. Currently stored in Germany, it comes equipped with a fine grain hopper, fine grain discharge, fine grain sack, a belt unit (Type: BTK 1510-0), water addition, extruder, supply air blower, reconditioned in 2016. It also includes dust removal, tumbler sieve, dedusting, final packaging, belt dryer, product hopper, pipe chain conveyor, cyclone, rotary valve, distributor, dust sack, exhaust air blower, air stream rotation dryer, feed table, mixer, and an additional air supply blower and belt dryer. The delivery terms are FCA. Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016 Kdedpfx Ahjvfxqys Nep

Condition: excellent (used), Lightly used automatic TC, TU, TZ profile production lines, designed for manufacturing and roll forming TC, TU, TZ profiles up to 1.5 mm metal thickness. Technical Specification: Kjdex Sx R Sopfx Ah Nodp Manufactured in: Estonia Adjustable profile height: 100 – 250 mm Profile width: 50 mm Profile edge (folded): 15 mm Minimum rollable sheet thickness: 1 mm Maximum rollable sheet thickness: 1.5 mm Roll distance: 300 mm Machine dimensions: 900 x 4000 mm The machine is not equipped with a guillotine or perforating rolls. Operation is straightforward, controlled via two buttons. If you have further questions, we will be happy to answer them.

Condition: reconditioned (used), Year of construction: 2002, Multicomponent Arburg IMM (Horizontal & Vertical) Clamping force 100 tons. Year 2002. Machine will be delivered RE-Conditioned (full checked tested and operate) Ask us for our service of Start Up with Warranty of working condition. Technical details CLAMPING FORCE 1000 kN SCREW DIAMETER Horizontal bimetalic 25mm SCREW DIAMETER Vertical 18mm INJECTION PRESSURE 2500 BAR INJECTION VOLUMEN horizontal 54gr INJECTION VOLUMEN Vertical 20gr Kjdpop Audqsfx Ah Nodp DISTANCE BETWEEN TIE BARS (h x v) 420x420mm MIN. MOULD HIGHT 250mm DAYLIGHT MAX 750mm WORKING HOURS 79.115 YEAR OF BUILDING 2002

Condition: good (used), Year of construction: 2003, Automatic hydraulic gluing press Kallesoe Type LV 7821 press is used for gluing wooden elements, e.g. tabletops with maximum dimensions of 7800 mm x 2100 mm, the factor which accelerates gluing is warm water supplied to the press shelf and being in continuous circulation (it can be supplied from CO or heated by heaters mounted on the press) Heating power of the press 72kW Maximum capacity of the press up to 2000 m2 / 7.5h Kdsdpfx Ajrqzgkoh Nep Glue applicator with feeder for Kallesoe press Type KL40 - used to automatically apply glue to each lamella and transfer directly to the press LV7821

Condition: excellent (used), Year of construction: 2016, operating hours: 3,204 h, functionality: fully functional, turning diameter over cross slide: 390 mm, turning length: 562 mm, turning diameter: 390 mm, spindle bore: 76 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,700 mm, total length: 2,834 mm, total width: 1,628 mm, turning diameter over bed slide: 600 mm, overall weight: 3,500 kg, bar passage: 65 mm, chuck outer diameter: 210 mm, spindle nose: ASA A2#6, Equipment: documentation/manual, Doosan Puma GT 2100 CNC lathe, year 2016, in excellent working condition and ready for production. Reliable and high-performance machine, ideal for precision turning operations in small and medium batch production. Ksdpfx Asy Dunwjh Nedp Equipped with tailstock, 12-position static turret, tool presetting system, 6 boring bar holders, and chip conveyor. Only 3,204 cutting hours. The machine is sold complete with all paper manuals. Robust construction, high accuracy, and excellent productivity. An ideal solution for machine shops and subcontractors looking for a modern CNC lathe fully equipped with accessories. Machine available for inspection under power by appointment.

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, Equipment: cabin, Paint/spray booth dimensions without fan and control Panel! Extraction surface - dimensions (mm): 4430(w)x1900(h) Overall dimension(mm): 4530(w)x2350(h)x1910(d) Technical data: Kdedjia Taxjpfx Ah Nep - Fan power 4.4kW (ATEX) - Fan suction capacity: 24000 m³/h (max 1200Pa) - Lighting: 2 pcs 2x58W (ATEX) - Connection voltage: 400V - Frequency converter for smooth regulation of the fan - Three-stage air filtration - Intended for explosive environments - EX - Complete technical documentation - CE Documentation - Warranty Possibility to order machines in various individual configurations and dimensions! Do not hesitate to contact us