Mesh welder

SMH 2000 2000

Condition: new, Year of construction: 2025, turning height: 2,000 mm, workpiece weight (max.): 12,000 kg, faceplate diameter: 2,000 mm, CNC Vertical Turning Center Model: VTC-20/30 with Fanuc 31i-B Table diameter: Ø2,000 mm Maximum swing diameter: Ø3,000 mm Maximum turning height: 2,000 mm Table speed: max. 200 rpm Table load capacity: 12,000 kg Table indexing: 0.001° Z-Axis (vertical ram travel): 1,200 mm Main spindle speed: max. 15 ~ 2,000 rpm Ram size: 240 mm x 240 mm Milling spindle taper: ISO 50 Tool shank size: 40 mm x 40 mm Crossrail (vertical travel): 1,000 mm 250 x 4 stages (hydraulic) Rapid traverse X-axis: 10,000 mm/min Rapid traverse 7-axis: 10,000 mm/min Cutting feed rate: 1 ~ 3,000 mm/min Table drive motor: AC 45/55 kW (continuous / 30 min.) Milling spindle drive power ISO 50: 18.5/22 kW (continuous / 30 min.) Control: Fanuc 31i-B Display unit: 15-inch TFT-LCD Tape memory: 1 MB Ppsdpoxqb D Njfx Agksu Automatic tool changer: 12 positions (for 5 turning tools + 1 cover + 6 milling tools) Standard tool holders: New 240 TCR-01 (2 pieces) Splash guard: Table version (R-type standard) External coolant system: 3 bar (80 liters/min.) Chip conveyor: hinge-type 4-jaw independent manual chuck Foundation anchor bolts / shims Maintenance tools and toolbox Hydraulic power unit Work area lighting Signal lamp: 3 colors (green, red, yellow) Operating manuals (English): NC 1 CD with Fanuc manuals and 2 books with mechanical/electrical instructions Power supply: 220 V, 60 Hz, 3 phase Machine color: manufacturer standard OPTIONAL ACCESSORIES (#1) Automatic tool changer ATC 24 positions - on request Automatic shutdown for N.C - on request Turning tool holder type 240TCR - on request Through-spindle coolant supply: 30 bar (pump pressure) - on request Transformer 415 V, 50 Hz, 3 phase - on request Linear scales X, Z-axis - on request Rigid tapping - on request Automatic tool changer ATC 24 positions - on request Other notes: INSTALLATION, COMMISSIONING, TRIAL OPERATION AND TRAINING - not included in the price INSURANCE AND FREIGHT - not included in the price Errors in the technical data excepted. The scope of accessories applies only as explicitly described in the article’s text. Any additionally pictured accessories, for example for illustration purposes, are not included in the offer. The general terms and conditions of JS-Werkzeugmaschinen GmbH apply.

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 119/020.0895, Manufacturing origin CH Voltage 400 V Netweight 4500 kg Custom position 8460.2320 Dimensions 2700x2350x2100 mm Pjdpfxelbgfcs Agkspu TECHNICAL DATA Control Fanuc 16i-T Center height 175 mm Distance between centers 1000 mm LINEAR AXES Grinding length 500 mm Strokes X : 267 mm Z : 650 mm WHEEL HEADSTOCK Continuous orientation +/- 8.5°. External grinding wheel size 500x80x203 mm Power 7.5 kW Speed 44 m/sec. WORKPIECE HEADSTOCK Taper type MT5 C-axis +/- 5 Power 1 kW Speed 30-1000 min-1 TAILSTOCK Taper type MT3 Sleeve stroke 35 mm Sleeve diameter Ø 50 mm Max. workpiece weight 130 kg POWER SUPPLY Voltage 400V 50 Hz errors and omissions excepted-data given without obligation Fully overhauled: Mechanics, geometry, hydraulics and electrical parts checked and/or replaced. Grinding headstock Disassembly, cleaning of parts, replacement of worn and defective parts, overhaul of motor, replacement of bearings, replacement of belts, disassembly of spindle, replacement of seals and O-Rings + adjustment. New paintwork. Headstock Dismantle, clean parts, replace worn and faulty parts, overhaul motor, replace belts. New spindle bearings. New paintwork. Tailstock Dismantled, checked and overhauled. Hydraulics Dismantle, check motor, replace hoses, defective and worn parts. Check hydraulic block X-axis Dismantle, replace worn parts such as O-Rings, seals, rings etc., overhaul hydraulic piston, grind tables. Z axis Dismantle, grind tables, replace worn and defective parts, overhaul hydraulic piston, new paintwork. Electrical cabinet Complete check, change various relays. Painting Colors: White RAL 9003 and gray RAL 7011 Geometry according to manufacturer's protocol. Inspection and cleaning of various accessories

Condition: new, functionality: fully functional, Over 100 pcs. original Caterpillar filters (new / unused / in original packaging). Fuel, oil, hydraulic, and air filters available. Selection of available types (multiple units available for some): 1G-8878 1P-2299 1R-0716 1R-0734 1R-0739 1R-0750 1R-0751 Ppedpoyka Uzsfx Agkeu 1R-0762 4I-3948 144-6691 151-2409 157-3862 269-8325 299-8229 308-7298 389-1079 462-1171 9N-3368 Attractive unit prices starting from 5 EUR. More than 50% below new price! Filters can be purchased individually or as a package (with special discounts).

Condition: used, Year of construction: 2006, Solid drill diameter / mm bore depth / mm number of spindles / 2-machine package: Froriep deep hole drilling machine & Irle finishing machine Perfectly matched duo for deep hole drilling and precise finishing of large workpieces A specialised machine package is available for sale – two perfectly matched systems for the complete machining of long, heavy workpieces with the highest demands on precision and efficiency. MACHINE 1 Froriep CNC deep hole drilling machine – the prefabrication specialist Year of manufacture: 2006 Control system: Siemens Sinumerik 840D Max. drilling depth: 8,850 mm Workpiece diameter: 150 – 900 mm Speed range: 1 – 300 rpm Feed rate: 0.5 – 4,500 mm/min Drive power: 129 kW Swing diameter over bed: 1,000 mm Clamping diameter faceplate: 900 mm Weight: approx. 47,000 kg Ideal for precise pre-drilling of deep holes – including faceplate, steering ring MACHINE 2 Pedpfx Aeuddimjgkspu Irle machine – high-precision finishing Power: 129 kW Control: Siemens NC control Speed range: 2 – 300 rpm (stepless) Feed: 3 – 4,500 mm/min (in steps) Centre distance: 11,000 mm Swing diameter over bed: 1,250 mm Clamping range of steady rests: 150 – 1,100 mm Workpiece length: up to 11,000 mm Workpiece weight: up to 10 tonnes Max. outer diameter: 850 mm With up to 50,000 Nm torque, perfect for smooth drilling, honing and demanding finishing processes. Your advantages at a glance - Complete solution from a single source – from pre-drilling to finishing - Large workpieces up to 11 metres and 10 tonnes in weight - High process reliability thanks to perfect machine synchronisation - Ready for immediate use, well maintained and from ongoing operation - Ideal for mechanical engineering, energy, oil & gas, hydraulics and large parts manufacturing

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm Pedpfx Agor Nfvmokepu With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Condition: like new (used), Year of construction: 2000, operating hours: 25,000 h, travel distance X-axis: 10,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,800 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, position of the milling head: 2.5 x 2.5 °, spindle speed (max.): 3,000 rpm, spindle speed (min.): 60 rpm, table width: 3,300 mm, table length: 12,000 mm, mount diameter: 50 mm, total height: 48,750 mm, total width: 100,000 mm, total length: 212,000 mm, overall weight: 100,000 kg, Duplex milling are two machines located one opposite the other which can work seperately or as single machine, workpiece can be machined with 2 simultaneous spindles. Production increase of up to 50% in relation to conventional solutions, i.e. individual milling machines Improvements in part precision, by managing to do the machining of the part in one single setup, in most of the cases One sole operator can control the DUPLEX milling machines Reduced space and investment requirement comparing with two single machines Fast investment amortization due to the high productivity Duplex solution admits different configurations: single working area, pendulum working areas Pjdpfx Agjrx Rxtokspu For machining excavator arms / boom like, CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Axis: 10300mm Y-Axis: 2000mm Z-Axis: 1800mm Table Length: 12000mm Table Width: 3300mm Table load: 100000 Power on spindle: 22/30kW Spindle speeds: 60 - 3000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 10000mm/min. Feed rate Y-Axis: 10000mm/min. Feed rate Z-Axis: 10000mm/min. Millinghead auto-index:2.5 x 2.5° Working hours: 25000H Length: 21200mm Width: 10000mm Height: 4875mm Weight: 100000kg

Condition: ready for operation (used), Year of construction: 2005, turning diameter over cross slide: 570 mm, turning length: 2,000 mm, spindle bore: 62 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 3 rpm, workpiece weight (max.): 2,000 kg, Equipment: rotational speed infinitely variable, The VDF 560 DUS are the most popular teach-in lathes from VDF Boehringer in terms of turning diameter. With a standard chuck size of 315 mm or more, these machines offer optimal machining efficiency for the production of single parts and small series. This machine is currently on display in our showroom; an on-site inspection is possible! Scope of delivery: Includes drawer cabinet with various tools and Multifix holders. Pedswv S Rtepfx Agkepu Specifications Manufacturer: VDF Boehringer Model: DUS 560 TI Year: 2005 Condition: Used Stock number: 00164 Maximum turning diameter: 570 mm Maximum turning length: 3000 mm Spindle bore: 62 mm Speed (min-max): 3 - 2500 rpm Spindle power: 19 kW Spindle mount: DIN 55 027 Gr. 8 Tool turret: Multifix Turret positions: 2 Tailstock taper: MK5 CNC control brand/type: Heidenhain Manual Plus 4110

Condition: like new (used), Year of construction: 2022, 600 kg load capacity, height-adjustable welding rotary table with through-hole, 100–200 mm Plate diameter: 700 mm Horizontal height: min. 0.65 m, max. 1.25 m Tilted height: min. 0.45 m, max. 0.95 m Speed: 0.01–1.1 rpm Tilt angle up to 135° Psdpfxod Anz Ro Agkspu Hand and foot remote control with speed display Very robust

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Pedpexdmgvjfx Agkspu Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: good (used), Year of construction: 1995, CNC turning machine Manufacturer: MONFORTS KNC 6, Year: 1995 Control system: Monforts MTC K. Center distance: 2000 mm Max. turning diameter over bed: 630 mm Max. turning diameter over cross slide: 380 mm Spindle speeds: 2 - 1800 rpm Spindle motor: 21/15 kW Spindle bore: 71 mm 3-jaw chuck FORKARDT 400 mm Tool holder Multifix size C with 3 tool pockets. Ppedpfxehktd Ne Agkou Space requirement: Length 4000 mm, Width 2200 mm, Height 1900 mm Weight: approx. 5000 kg Complete machine documentation available. Machine can be demonstrated in operation.