CNC cycle lathe

MONFORTS KNC 6

Condition: ready for operation (used), Year of construction: 1999, number of axes: 2, This Monforts KNC 6 S was manufactured in 1999. A robust horizontal turning machine featuring a maximum turning diameter over bed of 650mm and a maximum turning length of 2,000mm. It includes an R&D control unit, enhancing its operational capabilities. If you are looking to get high-quality turning capabilities, consider the Monforts KNC 6 S machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits Redpoyail Isfx Aglen • Rotation ⌀ max. Over support: 340 mm • Turn ⌀ max. Over bed: 650 mm • Max. Turning length: 2000 mm Extra Information Machine still under power

Condition: good (used), grinding diameter: 1,600 mm, grinding length: 6,000 mm, Manufacturer: CINCINNATI Rsdpfx Aevvvw Esglon Type: 60 x 216 Year of manufacture: 1970 Covex and Concave grinding 6 steady rest included 2 steady rest hydrostatic Coolant system with magnetic filter Measuring system with 5 arms caliber: Arm 1: Working area 1300 to 1600 mm Arm 2: Working area 1000 to 1300 mm Arm 3: Working area 700 to 1000 mm Arm 4: Working area 400 to 700 mm Specifications Metric US Standard Center height 787 mm Grinding diameter Ø 1574 mm Grinding length 5800 mm Grinding stone dimensions 914 x 101.6 x 304.50 mm Grinding stone speed 1800 rpm Dimensions (estimate) Length 15100 mm Width 5500 mm Height 3550 mm Weight 120000 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: good (used), 2 electronic handwheels from a cycle lathe MONFORTS KNC 8 with rotary encoder no. 6FC9320-5DC00 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel Rsdjw Elwrspfx Agljn

Condition: used, Year of construction: 1999, turning length 2000 mm greates pass round over bed 630 mm swing diameter over slide rest 350 mm control Monforts Control System K bed width 550 mm turning speed range 2 - 1800 U/min spindle diameter in front bearing 120 mm spindle head DIN 55027 - Size 8 tool taper RD2 PARAT quill stroke 210 mm spindle bore 71 mm total power requirement 30 kW weight of the machine ca. 5 t dimensions of the machine ca. 4,90 x 2,10 x 2,00 m Three-jaw chuck / key bar / Ø250mm Four-jaw chuck 3-jaw chuck for tailstock 4-station tool post head PARAT Fixed steady rest, Ø small Fixed steady rest, Ø large Rjdpfxew E Nmqs Aglsn Various chuck jaws, live centers, live centers, tool holders Chip conveyor with coolant pump

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: KME 2/750L, Tension carriage for saw frame Viewings are available by appointment. Redpfx Ajv Umb Ejglon

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 2,900 mm, total height: 3,000 mm, total length: 19,500 mm, type of input current: three-phase, warranty duration: 12 months, overall weight: 13,000 kg, table width: 800 mm, The line is designed to produce EURO 1200/800 pallets . In order to nail the pallets efficiently, three people are needed to operate it: to for stacking bottoms one person and for stacking pallet tops two people. The capacity of the machine is 2500 pcs per 8h, also it depends on the workers and their speed in stacking the pieces. The pallet after being nailed together is received by the milling machine, which mills the pallet, cuts the corners and burns the marks, after which the pallet enters the stacking machine, which cuts the pallet to a size of 1200, rotates it and stacks it with an elevator . Stacking can be done in a so-called sandwich (29 pieces), or individually up to (20 pieces). Rodpjt Tbuyjfx Aglsn pieces). Behind the stacking machine is storage for three pallet poles. The line is adapted for sawdust extraction

Year of construction: 2002, condition: reconditioned (used), Beam cutting, drilling and marking line DISC SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year 2002 Serial number: 122.400 Weight without accessories: 10,980kh - Disc saw with downward cut. - Geared saw unit, drive system and saw blade on wear-resistant swivel bearing. - Heavy saw gear with pinions in oil bath, with inclined teeth, hardened and sharp. - Hydraulic advancement of the saw blade, adjustable according to the table, very fast recoil. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic recoil limitation. - Vertical clamping block with self-adjusting push plate. - Oblique cutting device to adjust the angle from 45° to the left to 35° to the right. - Material sensor to automatically switch from rapid advance to work advance. - Hydraulically elevating feed roller for optimum material transport on the saw table. - Economical lubrication by means of a micro-dosing installation, especially suitable for sawing profiles. - Chip collector installed on the machine bench. Specs: - Cutting disc housing: 100x4x30x250mm - Cutting disc diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min. - Saw advance speed: 0-400mm/min. - Fast reverse speed: 2000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º cut - Angle steel: 250mm - Steel in U: 400mm - Double T-beam: 600mm - Wide flanged beam: 1008x302mm - Special wing beams: 1000x450mm Cut to degrees: IPBv beam - 75º: 1008x302mm - 60º: 910x302mm - 45º: 716x304mm Redshzbipepfx Aglen - 40º: 716x304mm - 35º: 478X307mm IPBs beam - 75º: 1008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX1215 Serial number: 122.401 Work capabilities: - Angular steel (minimum - maximum): 80x65x10mm - 250x250x28mm - Steel in U (minimum - maximum): 80x45mm - 400x110mm - Double T beam (minimum - maximum): 80x46mm - 600x220mm - Wide flanged beam (minimum - maximum): 100x100mm - 1,008x302mm - Extra wide wings beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis) 1 pc. - Horizontal (Z and W axes) 2ud. Drilling diameters: 8 - 40mm RPM: 150 - 1100 Fast forward - Fast reverse: 3,850mm/min. - 8,000mm/min. Drilling spindle feed rate: 0-500mm/min. Fast spindle positioning tool: 15,000mm/min. Automatic tool changer: 5 u. in each drilling unit. 3x5 u. = 15 total Total power: 45KW MARKING UNIT FEEDING: 26 METERS OF ENTRY WITH BEAM FEEDER + 6 SIDE ARMS FOR BEAM ENTRY IN PARALLEL TO THE ROLLER TRACKS 30 METERS OF ROLLER TRACKS WITH OUTPUT + 6 SIDE ARMS 4 SIDE ARM FOR SMALL PIECES THE GREAT MAJORITY OF ROLLERS ARE MOTORIZED It occupies approximately 60 linear meters between input and output power. *Request machine installation plans.

Year of construction: 2007, condition: like new (used), Technical data, please see in pdf document. Redpfxeha Dm Ts Agljn

Condition: good (used), Centre distance: 6500 mm Centre height: 665 mm Swing diameter over bed: 1270 mm Turning diameter over cross slide: 1000 mm Spindle speed: 3.55-710 rpm Faceplate diameter: 1200 mm X-axis travel: 600 mm Main spindle bore: 128 mm Tailstock quill diameter: 200 mm Tailstock quill travel: 350 mm Tailstock quill taper: DIN 55028 Rjdpfxew R Avbs Agljn Main spindle nose: DIN 55027 Accessories: 3 steadies, documentation

Condition: used, Stainless steel welding line MOD.70/120, made OLIMPIA 80 with tricathode welder & Seam bead roller & Orbital polishing Specifications: - Diameter : 35 – 120 mm Rjdsvtn H Tspfx Aglen - Thickness : 0.7 – 3.5 mm - Length : 3 – 6 m Tube diameter: 35 – 120 mm Thickness: 0,7 – 3,5 mm Tube length: 3 – 6 m