Cylindrical grinder 800 x 4000

STANKO 3m196

Condition: good (used), Year of construction: 2003, functionality: fully functional, workpiece weight (max.): 12,000 kg, feed length Y-axis: 300 mm, feed length Z-axis: 1,080 mm, table diameter: 1,200 mm, feed rate X-axis: 3 m/min, feed rate Y-axis: 500 m/min, feed rate Z-axis: 3 m/min, input current: 195 A, workpiece diameter (max.): 1,600 mm, milling spindle length: 450 mm, table bore: 400 mm, spindle speed (min.): 250 rpm, overall weight: 51,000 kg, power: 115 kW (156.36 HP), Equipment: documentation/manual, Liebherr high-performance gear hobbing machine LC1502 in good condition Controller Liebherr LH90 V4, Bosch Rexroth drives Extensive accessories such as BHG, cooling unit for lubrication and coolant, extractor, cutter arbors, various software packages/limit value extensions, and complete documentation. Nodpfjwqm A Tex Akcola We can also assist with setup and commissioning up to production, depending on effort!

Condition: ready for operation (used), Year of construction: 2010, General Data Measurements width 3056 mm Measurements depth 3994 mm Measurements height 2187 mm Machine weight 6360 kg Main Drive Spindle speed range 4000 Number of axis 5 Movement X-Axis Movement 260 mm X-Axis Rapid Traverse 30000 mm/min Y-Axis Movement ±50 mm Y-Axis Rapid Traverse 0000 mm/min Z-Axis Movement 795 mm Z-Axis Rapid Traverse 30000 mm/min B-Axis Movement 734 mm B-Axis Rapid Traverse 30000 mm/min Nlodpfxex D Sc Ne Akcsa Workpiece Workpiece drm over bed 590 mm Workpiece drm over support 360 mm This 5-axis MORI SEIKI NLX 2500 SY/700 was manufactured in 2010, featuring a max swing over bed of 590 mm and a cutting length of 795 mm. It includes Y and C axes, a sub-spindle, and high-pressure coolant system. Capable of handling bar work up to 80 mm, it's equipped with a chip conveyor and automatic bar feeder. Consider the opportunity to buy this MORI SEIKI NLX 2500 SY/700 turn-mill centre. Contact us for more information about this machine. Application Types Turning

Condition: like new (used), Year of construction: 2009, functionality: fully functional, We are selling this grinding machine, which is connected and available for testing. Machine parameters: - Grinding of rotational parts clamped between centers with an accuracy of 0.001 mm - Max. swing diameter: 0–1,450 mm - Max. turning length: 6,000 mm - Max. workpiece weight: 20,000 kg (25,000 kg with steady rests) Nledpfx Aoxxrzzokcea - Grinding wheel diameter: 915 mm - Wheel width: 100 mm - Non-contact measurement of dimensions, tolerances, and workpiece geometry, including printout of measurement protocol - 100% ultrasonic measurement possible - CNC control with capability for profile grinding (taper, concave and convex, CVC) - Grinding of ceramic and metallic coatings using diamond and ceramic grinding wheels The machine is currently completing an order.

Condition: used, Year of construction: 2013, lifting height: 88,000 mm, fuel type: diesel, Weights Empty weight: 47.700 kg Functional Lifting capacity: 530 kg Working height: 9.000 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information TÜV Marked: yes Nlsdpfx Aswx Ny Rokcoa Delivery terms: EXW Max. horizontal reach: 3290 m Transport dimensions (LxWxH): 16,35x2,55x4,01 Additional information Please contact Christian Theißen for more information Manufacturer: Palfinger Model: P 900 Year of build: 2013 Condition: Used Data: Max. working height: 90,00 m Max. platform height: 88,00 m Max. reach: 32,90 m Total dimensions LxWxH: 16,35 x 2,55 x 4,01 m Platform dimensions LxW: 3,45* x 0,96 m Max. basket load: 530 kg Swivel range: 540° Ground pressure: 345 kN Ground clearance: 0,22 m Own weight: 47.400 kg Support width one side: 7,45 / 7,46 m Support width both sides: 8,30 / 8,15 m Support length: 8,70 m Special features: Swivel work basket 2 x 84°, Basket arm rotation angle 164°, Loading area with side walls, *telescopic then 2.25m, generator 4 KVA/230 V Information: TÜV and UVV new

Condition: used, functionality: fully functional, Grinding length: 973 mm Center height: 250 mm Maximum worktable tilt: +6° / -9° Centering center: MT5 Maximum grinding head travel: 100 mm Maximum grinding head tilt: +45° / -30° Maximum grinding wheel diameter: 500 mm Speed range: 32 - 600 rpm Maximum workpiece weight between centers: 400 kg Maximum internal grinding device grindable bore: 160 mm Machine weight: approx. 5,000 kg Nlsdpfxswhp Dns Akcea

Condition: good (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: 4ROLL, roller (bottom) diameter: 470 mm, roller (top) diameter: 470 mm, side roll diameter: 420 mm, roller diameter: 470 mm, roller length: 3,050 mm, working width: 3,050 mm, working height: 1,800 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 45 mm, sheet thickness aluminum (max.): 45 mm, sheet thickness copper (max.): 45 mm, overall weight: 43,000 kg, total length: 7,700 mm, total width: 2,410 mm, total height: 2,470 mm, power: 37 kW (50.31 HP), input voltage: 380 V, type of input current: three-phase, working length: 3,050 mm, Equipment: documentation/manual, emergency stop, PLATE BENDING MACHINE FACCIN - 4 ROLL HYDRAULIC 3000 X 40 MM MODEL 4HCI3-35/30 YEAR 1990 PLATE BENDING ROLL LINEAR GUIDEWAYS DOUBLE PINCH PRE-BENDING Machine in good working condition Bending capacity -Plate width : 3000 mm -Rolling plate thickness 40 mm - Prebend thickness 35 mm Rolls dimensions: -Useful length 3050 mm -central rolls upper/lower 470 mm -side rolls left/right 420 mm • Hardening of the 4 rolls high strength surface • 3 rolls driven powered with gear unit with hydraulic motor • Conical bending attachment side rolls tiltable to form cones, contrast pad roller type. • Opening front hydraulic drop-end to unload the closed shell. • Variable speed working roll bending rotation hydraulic speed fast/slow. • Console electric on wheels with centralized commands joysticks and 3 digital readout. Nsdpfowb Scmsx Akcsla • Digital readouts of the rolls position bending and pre-bending repeatability. • Hydraulic tank capacity oil 350 liters – power electric 37 Kw voltage 380 /50 • Dimension 7700 x2410 x H 2470 mm - weight 43000kgs

Condition: good (used), Spindle diameter: 80 mm Spindle nose: SK50 Spindle speeds: 11 - 1000 RPM X-axis movement: 1700 mm Y-axis movement: 1800 mm Z-axis movement: 1800 mm Spindle out (W-axis): 710 mm Table size: 1100 x 900 mm Elbo Digital readout: On Y-axis and Z-axis Featured with: - Turning table - Toolholders Spindle engine: 7,5 KW Nledpsphl Ecjfx Akcea Machine LxWxH: 5100 x 2650 x 3300 mm Machine weight: 10 Ton

Condition: used, Year of construction: 1994, Technical details: number of spindles: 8 spindle passage: 32 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schütte Type: AF32 S DNT Yob: 1994 Eight-spindle automatic lathe with 8 main spindles max. nominal diameter D=32mm control: Siemens SIMATIC S7 electronic cam control Balluff gripper in position 8 for backworking CNC cross slide position 6 CNC cross slide position 7 Workpiece belt Coolant cooling Schimpke Chip conveyor with magnetic separator Tapping couplings Nedsl Su Rxjpfx Akcsla The tooling shown may differ from the scope of delivery! Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 1970, pressure:63 t throat:250 mm stroke:8-100 mm table depth:710 mm table width:500 mm ram head dimension:450x280 mm ram adjustment:63 mm Nodpfjcxxx Hjx Akcjla no. of strokes:140 Hub/min total power requirement:7 kW weight of the machine ca.:3,5 t

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 8038938456C, turning length: 450 mm, turning diameter over cross slide: 505 mm, turning diameter: 202 mm, spindle motor power: 10,000 W, spindle speed (max.): 6,000 rpm, spindle bore: 51 mm, Gildemeister CTX 310 Heidenhain Turn+ Nlodpjwk E Uzofx Akcja The machine its full functional, but have some miner isue.