Combined saw / cutter

Stehle F 3 C

Condition: new, Year of construction: 2026, _____Standard Equipment / Technical Data Engine Rated Power (ISO) 68 / 90 kW / hp at 2200 rpm Max. Power 71 / 95 kW / hp at 2000 rpm Max. Torque 405 Nm at 1500 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4 cylinders / 4.4l, 4V, STAGE 5 Controlled Turbocharger, SCR - Catalyst DOC - Diesel Oxidation Catalyst SCR Particulate Filter Catalyst Hood - single-piece, foldable Exhaust pipe on the right side in front of the cab Fuel tank capacity 198 liters / AdBlue 18 liters Transmission / PTO 16/16-speed Dyna-4, SpeedMatching, 40 km/h PowerControl operation on the left with load-sensing reversing gearbox, clutch operation, 4-stage load shifting with 1 lever, T-shuttle lever in the side console Partially automatic group shifting and Autotronic monitoring Permanently cooled wet disc clutches with independent lubrication system PTO: 540 / 540E / 1000, stub shaft 1 3/8", 6-spline Electrical engagement in the cab PTO START/STOP button on the rear, left fender Hydraulics / Lifting System Open Center system Quick coupler Cat. 2 Upper link control 4,300 daN maximum lifting force, 2 external lifting cylinders Adjustable lifting struts on both sides EHR with external control on both fenders Quick adjustable automatic drawbar coupling Electrical system Thermostart, 120 A alternator Power supply (12 Volt) for external devices with connector Axles / Additional Weights All-wheel drive front axle with switchable differential lock Rear axle ND with flange hub Oil-cooled disc brakes Front fender, width adjusted, rotatable Rear fender width 1.80 m, without extensions Front weight carrier with integrated drawbar and drawbar pin Driver's Seat Vibration-damped standard cab with standard roof, ventilation and heating Integrated safety frame with tinted glazing Doors on both sides with safety steps Steering column adjustable in height and inclination Air-suspended driver's seat with armrests, swivel adapter, safety belt Exterior & wide-angle mirrors Interior mirror Bodpfx Akozpcvdsnodh Analog-digital instrument panel (SIS) Radio preparation with antenna and speakers 4 work lights front and rear on the cab roof 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders Special Equipment: Fuel tank protection PowerControl & Brake on Neutral (clutch effect) 100 l/min, Open Center hydraulic system oil flow coupling (58+42 l/min) Front loader quick coupling system Leak oil collector on quick couplers 3 control valves: 1x MR, dw, EA, SST + 1x dw, NL, SST + 1x dw, NL, SST + free return 2.5t front lift, 1 hydraulic line set, electrical socket MF front loader preparation: foundation set, hydraulic set, electrical control via joystick, PTO: 540/540E, flanged, 6-spline, internal engagement Rear fender extensions - 100mm Tires 480/70R38 & 380/70R28 Air conditioning Cab with mechanical suspension Telescopic exterior & wide-angle mirrors Passenger seat with belt Air-suspended driver's seat, automatic adjustment with safety belt, swivel adapter and armrests Rear window wiper / washer system Without MF Connect (MF Telemetry System)

Year of construction: 2026, condition: new, Continuous pasteurizer electric - up to 400 ltr./h Bdedst Uzitopfx Aknsh * Water bath boiler * Electric heating 13.5 / 18 / 27 / 31.5 kW - 400 V * Container (stainless steel) 150 ltr. with thermal insulation * Stainless steel tubular heat exchanger * Automatic low temperature safety device (compressed air required) * Stainless steel juice pump * Chassis with holder for low temperature safety device and pump ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x2070x1135 mm Weight 320 kg Bdedpovz E Sijfx Aknsh Total power requirement 2,2 kw

Condition: used, Robland NLX1700 panel saw and spindle moulder, very good condition, 2x3 kW, approx. 2000 mm cutting length, approx. 100 mm cutting height, 1700 mm sliding table length, approx. 450 kg Bdsdpfx Aewzzh Esknjh Subject to price changes, errors, misprints and typographical mistakes excepted.

Condition: new, Year of construction: 2024, TECHNICAL DATA Table size 1100 x 760 mm Table height 870 mm Milling spindle non-replaceable 30 mm Clamping height 140 mm Height adjustment 125 mm Dust extraction port 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 Light Gray and Bdjdpjfpb Nmsfx Akneh RAL 5000 Violet Blue Net weight approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Table milling machine with a permanently installed, single-sided swiveling milling spindle for a swiveling range of -5° to +45.5° Positioning control for height and swivel adjustment with zeroing of the height and offset dimension Electronic position and speed indicators 4 speeds 3000 / 4500 / 6000 / 9000 rpm Belt quick-clamping device Push buttons for spindle start and stop Left and right rotation Milling cutter quick-clamping device Finely planed gray cast iron table with rigid frame support Control panel located below on rigid frame support Milling fence 216, total adjustment via handwheel and LCD display, including cast iron fence plates and aluminum splinter guards Machine socket Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE compliant GS tested

Condition: like new (used), Year of construction: 2022, For sale is a demonstration unit of a Hammer A3-31 jointer-thicknesser with a planing length of 1400 mm. The machine is in like-new condition. Technical data: - 3-knife cutterhead - Planing width: 310 mm Bdedpfx Asx U U Ekjknjh - Planing length: 1400 mm - Max. workpiece height: 230 mm - Motor power: 3 kW - Extractor connection Ø 120 mm - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Related terms: jointer, thickness planer, planer machine, surface planer, thicknesser Reference: R-A0117

Condition: new, Hemming tool for Lvd/Trumpf Bjdpfx Akji Hbcwjnedh

Condition: used, functionality: limited functionality, 1.Equalizer. - shaft width 260 mm - length of tabletops 1560 mm 2.Thicknessing machine - thickness of the workpiece 180mm 3.Drilling machine - max tool diameter 18 mm - drilling depth 80 mm - drilling width 140 mm - table top adjustable up/down front/back and sideways 4.Circular saw - NO SAW BLADE 5.Milling machine - Spindles 30 mm - Adjustable spindle Bdedpeqwg Efefx Aknsh CONDITION AND COMPLETENESS AS IN PICTURES

Condition: used, Year of construction: 1980, saw blade diameter 380 mm pneumatic clamping ja 46893 weight of the machine ca. 1,3 t +++++ Bedpfxed N Sm Dj Aknodh Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: new, Year of construction: 2018, Storage location: 100239478 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Equipment: Standard equipment: 1b) Standard version with a 27.0 m outreach 2c) Radio remote control 2d) Small control panel 3a) Complete with pyramid supports 7) Collector for continuous rotation 8) MICROMOVE positioning mode 9) Cast ballast with 4 x concrete ballast blocks, each weighing 910 kg Bdedpfx Aezkz Inoknsh Location: Regensburg