Coordinate measuring machine

Stiefelmayer VENTURA DESIGN

Condition: used, Year of construction: 2016, machine/vehicle number: 1265000063, total height: 3,500 mm, total length: 7,000 mm, total width: 6,000 mm, overall weight: 41,000 kg, DMG MORI DMU 160 P Universal Machining Center in heavy-duty portal / duoBLOCK design for 5-axis positioning and simultaneous machining. Equipped with Heidenhain TNC640 control and designed for high-precision heavy-duty machining in tool, mold, and mechanical engineering.Large working area with integrated NC rotary table and controlled B-axis milling head for complex 5-axis machining. The machine concept is designed for maximum rigidity, thermal stability, and high long-term accuracy.The machine features SK50 spindle technology, a wheel magazine with 63 tool positions, and a double gripper system. Through-spindle coolant supply and extensive measurement and process optimization systems are available.Equipment includes, among others:Oil and emulsion mist separator with mechanical filterBlow air through the spindle centerBlum Laser NT Hybrid tool measurementM&H infrared measuring probe3D quickSET package for kinematic calibrationMPC Machine Protection ControlACC Active Chatter ControlApplication Tuning Cycle (ATC)Virtual axis for Heidenhain TNC640Heidenhain HR520 electronic handwheel with display4-color signal lampSafety package in case of power failureSafety laminated glass paneMachine version as pit version with adapted chip conveyor height and operator staircaseThe virtual axis enables movement towards an inclined tool via the electronic handwheel.The machine is designed for demanding 4-/5-axis machining with high process reliability, optimized surface quality, and reduced machining times.Technical highlights:63-position wheel magazine with SK50 tool holderThrough-spindle coolant supplyIntegrated measurement and calibration systemsHeavy-duty portal design with high thermal stabilityOptimized for high-precision continuous machiningExtensive factory options and process-optimized equipmentMachine from ongoing industrial production with high-quality OEM equipment and documented factory configuration.Operating hours: approx. 19,680 h (program run: 24,564 h). 5-axis machining: Yes Travel Z-axis: 1100 - mm Bedpoy S Nhuefx Abwodc Weight approx.: 41,000 kg Serial number: 1265000063 Travel X-axis: 1600 - mm NC rotary table: Yes Dimensions (LxWxH) approx.: 7000 x 6000 x 3500 mm Control: Heidenhain TNC 640 Travel Y-axis: 1600 - mm Year of construction: 2,016 Condition: good Terms of payment: 100% prepayment before pick-up Terms of delivery: From foundation under power: Yes

Condition: used, Year of construction: 2007, number of spindle speeds 10.000 U/min NC rotary indexing table Ø 630 mm control HEIDENHAIN - iTNC 530 numbers of positions in the tool changer 32 tool taper SK 40 5-axis simultaneous machining center | HERMLE - C 30 U equipped with ITC (80 bar), NC swivel rotary table, tool changer & chip conveyor. The Z-axis motor was replaced in 2025, and the spindle was already replaced in 2015 at 7,100 operating hours. The machine is in a well-maintained condition and can be inspected under power at any time. Please refer to further technical details in the attachement of the offer. Bsdezaf Huspfx Abwjdc - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: C30U | C-30U | C-30 U

Condition: good (used), Year of construction: 2010, Ref. -No.: 10646 Manufacturer: DMG Type: DMU 125 FD duoblock Year of construction: 2010 Type of control: CNC Control: Siemens Sinumerik 840D Storage location: Halberstadt Country of origin: Germany X-Travel: 1250 mm Y-Travel: 1000 mm Z-Travel: 1000 mm NC swivel rotary table: 1250 O Tool Taper: HSK - A100 Numbers Of Tools In Magazin: 40 Bdedpfx Aoy Hrn Hjbwec Spindle Speed: 12000 RPM Main Drive: 44 kW Internal cooling: 40 bar Further information: - Universal milling head with controlled B-axis - Tool changer with horizontal double gripper - Taper cleaning for HSK-A 100 - Safety enclosure - Coolant tank, 600 L - Chip conveyor - Rotating viewing window - 3D path control - Heidenhain TS 649 DMG infrared probe - Siemens 840D electronic handwheel - Flushing gun with pump The machine can be viewed in operation by appointment.

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 640, total height: 2,700 mm, overall weight: 9,600 kg, spindle speed (max.): 20,000 rpm, product length (max.): 3,000 mm, number of axes: 5, This 5-axis DMG MORI DMU 60 EVO was manufactured in 2017. It features a Heidenhain iTNC 640 control, a spindle speed of 20000 rpm, and a 120-fold tool changer. The machine includes a chip conveyor, coolant system, and an internal coolant supply of 40bar. It's well-suited for high-precision machining tasks. Consider the opportunity to buy this DMG MORI DMU 60 EVO vertical machining centre. Contact us for more information about this machine. • NC swivel rotary table • Tool changer: Yes, chain magazine 120 positions (120-fold) • Coolant: internal/external; internal coolant supply 40 bar / 6001; extended chip flushing; flushing gun; blast air through spindle center • Rotating viewing window • Electronic handwheel • Screen display: German/English • Space requirement: 25 sqm • Condition: Very good, in operation Additional equipment Bdodpfx Absy D Hvaswjc • Chip conveyor • Oil and emulsion mist separator • Infrared PP 60 optical measuring probe • Tool breakage control TRS2 • Signal light, 4-color • Extended interface M65 for Erowa Job Management System • Preparation for EROWA handling system (Operating mode 4) • Accessories: 120x SK40 tool holders Technical Specification Taper Size SK 40

Condition: used, Year of construction: 2012, machine/vehicle number: MB0001-000031, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 12 m/min, rapid traverse Y-axis: 12 m/min, rapid traverse Z-axis: 12 m/min, feed length Y-axis: 6 mm, feed rate X-axis: 6 m/min, feed rate Y-axis: 6 m/min, feed rate Z-axis: 6 m/min, controller manufacturer: FANUC, controller model: 32i Model A, workpiece diameter (max.): 2,550 mm, workpiece weight (max.): 7,000 kg, total height: 4,200 mm, total length: 5,540 mm, total width: 5,930 mm, table width: 1,400 mm, table length: 1,600 mm, overall weight: 29,000 kg, spindle speed (max.): 3,000 rpm, distance table center to spindle nose: 1,750 mm, spindle motor power: 26 W, spindle nose: BT50, number of slots in tool magazine: 60, tool length: 600 mm, tool diameter: 250 mm, tool weight: 30 g, B Axis: 1 degree Control: FANUC 32i-Model A Distance from Spindle Nose to Table Top: 0 - 1500mm Distance from Spindle Nose to Table Centre: 550 - 1750mm Machine Dimensions: 5540 x 5930 x 4200mm Machine Weight: 29000kg Bdodsxm Sxvspfx Abwec Maximum Cutting Feedrate: 6m/minute Maximum Tool Diameter: 250mm Maximum Tool Length: 600mm Maximum Tool Weight: 30kg Maximum workpiece weight: 7000kg Rapid Feedrates: WXYZ: 6 x 12 x 12 x 12m/minute Spindle Diameter: 110mm Spindle Motor Power: 26/22kW Spindle Speed: 3000rpm Swing: 2550mm Table Size: 1400 x 1600mm Tool Change Capacity: 60 Station Tool Size: BT50 Traverses XYZ: 2000 x 1500 x 1200mm W Axis: 500mm Coolant, Low Volt Light, Swarf Conveyor, Long Reach Right Angled Milling Head, Tool Length Measurement Probe, Renishaw Work Probe, Fully Enclosed machine guards.

Condition: good (used), Year of construction: 2017, travel distance X-axis: 500 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, 5-axis machining center DMG MORI CMX 50 U including robot Year of manufacture: 2017 Control unit: Siemens Operate Technical Data Travel paths: X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm Bjdpey Ry N Tsfx Abwsdc B-axis: -5 to +110° C-axis: 360° Main spindle: Tool holder: SK 40 Spindle speed range: 20 - 12,000 rpm Drive power – main spindle (100/40% duty cycle): 13 / 9 kW Worktable: Table size: Ø 630 x 500 mm Tool changer: Number of tool stations: 30 positions Feeds: Rapid traverse (x/y/z): 30 m/min Operating hours: Spindle hours: Technical features & accessories: - Direct absolute measuring system in x, y, and z, including air purge - Blowing air switching via M-function - Production package, consisting of: • Internal coolant supply 12 bar • Chip conveyor, tank 250 L • Enclosure roof • Tool changer door can be opened • Signal lamp • Touch probe PP40 • Tool measurement TS27R • Tool breakage monitoring Robot ROBOJOB Type: Mill-Assist-E Year of manufacture: 2018 Spindle bearings replaced in autumn 2025.

Condition: good (used), Year of construction: 2008, Ref. -No.: 10626 Manufacturer: DMG Type: DMU 210 P Year of construction: 2008 Type of control: CNC-Steuerung Control: Heidenhain ITCN 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm B-Axis: -30 / +180 ° C-Axis: 360 ° Table Load: 8000 kg Clamping Area: 1.700 mm Tool Taper: HSK - 100 Spindle Speed: 10.000 RPM Max. Torque: 288 Nm No. Of Working Stations: 60 coolant reservoir: 40 bar L. Further information: - The DMG DMU 210 P 5-axis machining center is suitable for high-precision machining of large, heavy workpieces. - Direct position measuring systems in all axes Bdedpsy H Er Ejfx Abwsc - Heidenhain TS workpiece measurement - Electronic handwheel setup mode - Chip conveyor chip disposal - Double gripper tool changer - Motor spindle technology The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2018, functionality: fully functional, measuring range X-axis: 1,500 mm, measuring range Y-axis: 900 mm, measuring range Z-axis: 700 mm, Buy your coordinate measuring machine from the largest specialist for CMMs with 30 years of experience – Kneissl-Messtechnik. With KNEISSL-Approved, you receive a used machine that has been thoroughly inspected, tested, and is guaranteed ready for operation – quality you can trust. General machine data: Machine type: Reference XI 15.9.7 Year of manufacture: 2018 Manufacturer: Hexagon Measuring range: 1500 x 900 x 700 mm Accessories: Bdjdpfxjyg I Hds Abwoc Probe head mount: HP-SX-5 probe head Probe head: +2 change discs Additional accessories: Ceramic calibration sphere, Windows 11 PC, 23" monitor, MCOSMOS 4.0, Controller B5 As specialists, we are pleased to offer you tailored advice to find the right machine for your measurement requirements. We offer worldwide delivery upon request!

Condition: excellent (used), Year of construction: 2013, travel distance X-axis: 935 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 650 mm, Travel distance X-axis: 935 mm Travel distance Y-axis: 850 mm Travel distance Z-axis: 650 mm Controller manufacturer: HEIDENHAIN Controller model: iTNC 530 HSCI Table load: 1,500 kg Spindle speed (max.): 18,000 rpm Number of slots in tool magazine: 60 Number of axes: Bedpfsy Ukq Nox Abwodc 5 Description This 5-axis DMG MORI DMU 85 monoBLOCK was manufactured in 2013 – OPERATING HOURS 33,500. It features an impressive X-axis travel of 935 mm, Y-axis travel of 850 mm, and Z-axis travel of 650 mm. The machine includes a robust table with a diameter of 1,040 mm and a maximum table load of 1,500 kg. If you are looking for high-quality machining capabilities, consider the DMG MORI DMU 85 monoBLOCK vertical machining center that we have for sale. Contact us for further details. • Max feedrate: 40,000 mm/min • Table size: Ø 1,040 mm

Condition: used, Year of construction: 2023, Lathes Bdedpfx Aboy Nxc Ajwec Travel distance X: 495 mm Travel distance Y :125 mm Travel distance Z: 1560 mm turning length: 1540 mm max. turning diameter: 660 mm max. circulation diameter: 660 mm spindle boring: 65 mm range of revolutions till: 5000 rpm powered tools B-axis: ±120° Tool spindle speed: 12,000 rpm Tool magazine: 38 tools Machine weight: 18,800 kg Condition: rarely used, like new