LPG forklift including accessories

STILL R70-16 T

Condition: used, Year of construction: 2008, Technical details: bore capacity in steel (diameter): 40 mm throat: 350 mm bore stroke: 120 mm bore capacity in cast iron: 60 mm spindle taper MT: MK 4 spindle throat: 350 mm spindle speed:: 50 - 1450 / 18 step U/min feed: automatisch/manuell mm/U Distance spindle/table max.: 25 - 705 mm table clamping surface:: 430 x 430 mm drill table adjustment: 680 mm column diameter: 150 mm distance spindle center to floor plate:: 1210 mm total power requirement: 1,6 kW weight of the machine ca.: 350 kg dimension machine xH: 0,95 x 0,55 x 2,3 m Height-adjustable table(swivel and tilt adjustable ) Table can be swiveled 45° left/right and rotated 360° around the column Thread cutting up to M24 Nwjdpjviqybofx Akcjf Coolant system A vise is mounted, and a threading device is included with this machine. *

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual Nwsdpfx Akowrm Dtjcof >> Coolant device >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: used, Year of construction: 2000, used CONDOR AC, partially overhauled Centre height: 165 mm Between centres: 750 mm Spindle bore: 40 mm Spindle speeds: 22–2,800 rpm, infinitely variable - Quick-change tool post size B - WEILER DZ-V digital readout - Hollow spindle stop - Fixed steady rest - 7 Multifix tool holders - Flat splash guard - Electrically interlocked chuck guard - Change gears and various soft jaws The machine is partially overhauled: - Bed slide: guideways re-coated and hand-scraped, gibs and lower guide strips adjusted - Cross slide measured and aligned on bed slide; cross slide dovetail guide newly scraped, gibs adjusted and scraped - Top slide newly scraped and gib matched - All measuring scales overhauled and cables replaced Nwsdpfjx E Um Njx Akcsf The machine is located in our showroom at 71334 Waiblingen-Beinstein and is immediately available. For details on equipment, please contact us.

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Active Digital Readout Heidenhain, Excellent Condition, CE Compliant!!! Technical Data: - Year of manufacture: 1992, Machine no. 2203-8449 - Fixed angle table - Spindle speed: 50 - 2500 rpm - Feed rate: 8 – 630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min - Travel (X/Y/Z): 500/400/400 mm - Vertical milling head traverseable on column - Vertical and horizontal quill - SK40 taper - Vertical quill extendable by 90 mm - Hydraulic drawbar system - Approx. weight: 1600 kg Equipment and Accessories: - 3-axis active Heidenhain digital readout - Coolant system - Chip tray - Central electric lubrication - Operating manual, spare parts drawings About the Machine: For sale is a Deckel FP4M Universal Milling Machine (Active) in very good condition. The machine has minimal backlash, and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs quietly. The machine features hydraulic tool clamping. The FP4M was only occasionally used in a state-run facility for training purposes. On this newer FP4 model, the feed rates are steplessly adjustable in all three axes, and each axis also features a rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input measurements that the machine will approach automatically. Oil change has been performed; mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site. Njdpfx Akju Tuk Hscewf

Condition: new, PRICE: 1200 EUR Nwedpfx Aop R Si Hokcof Paddle Mixer S20 Manufacturer: Sind Model: S20 Dimensions: 550x320x580 mm Electrical power: 0.55kW Capacity: 28L / 20kg

Condition: new, Column drilling machine Bernardo GB 35 HSV with coolant system Drilling capacity of 32 mm Drill Chuck 1-16 mm / B-16 Dome MK 4 Spindle speed (12) 75-3200 RPM Feed range 0.10 0.18 0.26 mm / U Throat depth 295 mm Distance from spindle / table max 775 mm Distance from spindle / base plate 1185 mm Quill stroke 125 mm Column diameter 115 mm Table size 500 x 455 mm T - slot size 14 mm Work surface of bottom panel 375 x 365 mm S1 motor power output 100% 1.1 / 1.5 kW (400 V) Motor power S6 40% 1.5 / 2.2 kW (400 V) Machine dimensions (W x D x H) 630 x 700 x 2050 mm Weight approx. 340 kg Scope of delivery Keyless drill Chuck 1-16 mm / B-16 Chuck Dorn MK 4 / B-16 Nwodpfjd Hbwiox Akcsf Coolant system Reduction sleeve MK 4 / 3 Height-adjustable guard Digital drill depth indicator Thread cutting device LED machine luminaires Control tool

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1230x490x2120 mm Weight 200 kg Nodjvz Hpcspfx Akcjwf Total power requirement 1,5 kw

Condition: good (used), Automatic drill, drill press, drill press, stand drill, pillar drill -Spindle mount: MK 3 -Transmission -Automatic drill: with rapid traverse -Automatic drilling -Threading: automatic -Table size: 450 x 360 mm -Projection: 285 mm -Spindle stroke: 150 mm Nedpfxjcghg Uj Akcewf -Speed: 180-2000 rpm -Feed: 0.08-0.32 mm/rev -Dimensions: 900/1000/H2100 mm -Weight: 840 kg

Condition: ready for operation (used), Year of construction: 2023, This CLOOS Instant pro IRPS was manufactured in 2023. It features a QIROX welding robot with a maximum payload of 10 kg and a working range of Ø 3900 mm. Equipped with advanced QC 2 control system, it includes a programming handheld device and supports new tandem leading/trailing processes. Ideal for high-quality welding applications, it also comes with a comprehensive set of welding and sensor technologies. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits • Working range: Ø 3900 mm • Programming handheld device with touchscreen • Qirox technology interface • Tool controller ctms • Tcp measuring device Extra Information Nwjdpfxeyaimlo Akcef Welding Technology Power source Arc sensor Water cooling module Control module Wire drive unit Robot welding torch Software Parameter grinding Distance-dependent transition between parameter lists Multi-layer technology Programmable pendulum figures Software language: German IRPS Scanner Control IPC Rittal control cabinet Touch screen Scanner interface Uninterruptible power supply Scan width: 1000 mm at 500 mm product height Scan speed: 300 to 1000 mm/sec Burner Cleaning Unit Torch cleaning device Compressed air amplifier Wire cutter Control Unit Digital inputs/outputs: 16 Serial interface Computer connection: QIROX controller CAN bus USB interfaces: 2 Flash memory: 8 GB Buffer module: 24V Point editor Expandable to up to 16 axes

Condition: new, Year of construction: 2026, The Z5040L industrial gear drill ensures optimal drilling results. It is characterized by solid workmanship and high power, so it can be used both in repair plants and in industrial production. The drill is equipped with a massive, adjustable cube table, auto-feed, a solid gear with a wide range of rotational speeds, right/left rotation and an adjustable drilling depth limiter with a scale. The drill has a built-in cooling system. CORMAK Z5040L pillar drill - description of the machine Automatic spindle feed Cube table rotates around the column, tilts 45° to the right/left Workspace lighting Possibility of threading Work table and base equipped with T-slots Right/left rotation Drilling depth indicator CORMAK Z5040L pillar drill - technical parameters MAX. DRILLING DIAMETER 40mm NUMBER OF GEARS 18 Nwodpfx Asridxxskcof THREADING STEEL/CAST IRON 22/24 mm DISTANCE FROM THE CENTER OF THE SPINDLE TO THE SURFACE OF THE COLUMN 350mm MAX. DISTANCE OF THE SPINDLE END TO THE WORK TABLE 770mm MAX. DISTANCE OF THE SPINDLE TIP FROM THE BASE 1215 mm MAX. SPINDLE TRAVEL 185mm SPINDLE TAPER MK 4 FEED RANGE 0.1mm; 0.2mm SPINDLE SPEED RANGE 75 - 1450 rpm WORKTABLE DIMENSIONS 560 x 520 mm SIDE TABLE DIMENSIONS 560 x 250 mm BASE DIMENSIONS 730 x 500 mm WIDTH OF T-GROOVES 18mm ENGINE POWER 1.5 kW COOLANT PUMP POWER 75 W OVERALL DIMENSIONS 2230 x 560 x 850 mm WEIGHT U 510 kg