Lead/traction spindle lathe
Weiler Condor 81 Geometrisch Überholt

Name: Weiler Condor 81 Geometrisch Überholt
Brand: Weiler
Availability: InStock

Condition

Used

Location

Ubstadt-Weiher Germany

Lead/traction spindle lathe Weiler Condor 81 Geometrisch Überholt

Show map

Machine data

Machine type:: Lead/traction spindle lathe

Manufacturer:: Weiler

Model:: Condor 81 Geometrisch Überholt

Condition:: like new (used)

Functionality:: fully functional

Price & Location

Location:: Großer Sand 19-21, 76698 Ubstadt-Weiher, Deutschland

Call

Details about the offer

Listing ID:: A19344111

Update:: 12.06.2025

Description

Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW
Geometrically overhauled with inspection protocol for new machine tolerances

Technical data:

>> Machine No. 84-121
>> Center height 165 mm
>> Center distance 750 mm
>> Spindle speeds: from 22 to 2800 rpm
>> Spindle bore 40 mm
>> Short taper spindle head DIN 55027 size 5 with bayonet lock
>> Tailstock MK 3
>> Feeds from 0.015 to 0.46 mm/rev
>> Possible threads: metric, imperial, module, and diametral pitch
>> Metric thread pitches from 0.18 to 28 mm
>> Weight approx. 1100 kg
>> Spindle brake switchable
>> Length 1.83 m, Height 1.29 m, Depth 0.88 m

Equipment and accessories:

>> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions
Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching

>> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm
>> 160 mm three-jaw chuck with 2 sets of jaws NEW
>> Multifix size B NEW with 3 piece steel holders
>> Bed stop
>> Electric chuck guard NEW
>> Rear wall
>> Operating manual
>> Coolant device
>> Machine feet

About the machine:
Dkodpewrm Dtefx Agdeg

A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol.
The accessories collets and chuck are new.
For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2007

91 listings online

Call

Send inquiry

Telephone & Fax

+49 7251 ... show

Fax:

These listings may also fit your interest.

Listing

Schweiz

8,020 km

Teach-in lathe
VDFDUS 1000 ti

Call

Listing

Lead/traction spindle lathe Weiler Primus VC

Germany

7,781 km

Lead/traction spindle lathe
WeilerPrimus VC

Call

Condition: good (used), Year of construction: 2000, Weiler Primus VC, Year of manufacture 2000, Digital display, Center distance 500 mm, Max. turning diameter over slide 150 mm, Spindle speed up to 4,000 rpm, Spindle bore 40 mm, Spindle drive 1.5 KW, Dkodpfx Ajv Ifxiogdsg Multifix tool holder, 24 longitudinal feeds, Metric thread, Inch thread,

See details

Listing

Cylindrical Grinding Machine - Universal LUBRO Grisetti RTA 1000

Malsch

7,893 km

Cylindrical Grinding Machine - Universal
LUBRO GrisettiRTA 1000

Call

Condition: excellent (used), Year of construction: 1977, grinding diameter 350 mm grinding length 1000 mm centre height 100 mm grinding wheel diameter 360 mm total power requirement kW weight of the machine ca. 3,8 t Djdpfjunt Eyjx Agdokg dimensions of the machine ca. 3,5 x 1,3 x 1,5 m Machine in very nice condition, external + internal spindle, many accessories.

See details

Listing

Tangential grinding jakobsen 1432 Jakobsen 1432

Balaguer

7,846 km

Tangential grinding jakobsen 1432
Jakobsen1432

Call

Year of construction: 1990, condition: reconditioned (used), tangential grinding machine Brand: Jakobsen Model: 1432 Year: 1990 rpm: 1400 Dsdpfx Ageiv S Avedokg Grinding area: 800x400mm Table size: 1000x350mm Maximum load on table: 400kg Maximum piece height: 475mm Grinding wheel size: 350x50x127mm Heidenhain ND 221B height indicator. Magnet table 800x350mm electronic Selter with magnetization regulator. Maximum distance between table and grinding wheel: 650mm MONNET brand filter of the year 2007 Includes sets of wheels (See photos).

See details

Listing

Doetinchem

7,581 km

Tool and Cutter Grinder
JungnerUS 450

Call

Listing

Mozé-sur-Louet

7,429 km

MILLING MACHINE
HURONRU 911

Call

Listing

Contamine-sur-Arve

7,946 km

Wire erosion
AGIECUT 20P

Call

Condition: used, TECHNICAL DETAILS - Table dimensions : 700 x 480 [mm] - Dielectric capacity : 600 [l] TRAVELS - Travels on X/Y/Z axes : 350 x 250 x 250 [mm] - Travels on U/V axes : +/- 90 [mm] - Max. taper : [°/mm] PART - Max. part dimensions : 900 x 680 x 250 [mm] - Max. part weight : 400 [kg] - Finishing quality : 0.125 [μm] WIRE GUIDE - Wire diameter : 0.15 - 0.30 [mm] - Coil weight : 5 - 8 [kg] - Speed : 30 - 270 [mm/sec] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 11 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2500 x 2500 [mm] Dkjdpfx Agsuhq Rlodsg - Machine height : 2200 [mm] - Machine weight : 2890 [kg] MACHINE HOURS - Number of working hours : 1266 [h] EQUIPMENT - CNC : Charmilles Pentium III CPU - Remote control - Cooling unit

See details

Listing

Surface Grinding Machine - Horizontal ZIERSCH & BALTRUSCH PROFITLINE ZB 62

Bühl

7,895 km

Surface Grinding Machine - Horizontal
ZIERSCH & BALTRUSCHPROFITLINE ZB 62

Call

Condition: used, Year of construction: 1996, grinding length 600 mm grinding width 250 mm workpiece height ca. 385 mm table surface area 600 x 200 mm table speed -stepless- 2 - 35 m/min table load capacity max. 250 kg grinding wheel size ø 225 x 25 mm grinding wheel hole diameter 50,8 mm vertical feed autom. 0,001 - 0,099 mm rapid traverse vertical 600 mm/min cross feed of table continual 10 - 1000 mm/min rapid traverse cross 1000 mm/min total power requirement 6 kVA dimensions of machine L x W x H 2,65 x 1,70 x 2,28 m Accessories: DRO on Y-and Z-axis, magnetic plate 600 x 200 mm, grinding wheel with flange, wheel trueing attachment, wet grinding attachment with paper band filter Dedpfx Aget Tqrnodjkg

See details

Listing

Ravels

7,541 km

Circular saw
Format4X Motion

Call

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, input voltage: 380 V, extraction connection diameter: 120 mm, saw blade bore: 30 mm, cutting depth: 110 mm, main saw diameter: 400 mm, extraction nozzle diameter: 120 mm, length stop: 3,200 mm, working width: 1,100 mm, Equipment: motor brake, Format 4 x motion in excellent condition, always worked on by 1 person Dkedpjv Aywpsfx Agdsg

See details

Listing

Fuente de Cantos

7,534 km

Centerless grinding machine
ESTARTA301

Call

Condition: good (used), Manufacturer ESTARTA Model 301 MV Condition Used Stock number 4576 Location Badajoz, Spain Dimensions 1520x1020x1260mm Weight 1550 kg Opening between grinding wheels 1,5/50mm Max. grinding wheel width in plunge grinding plunge 125mm Dimensions of the working wheel (od x id x width) 300x125x175mm Øext.min. working wheel working wheel 220mm Max. depth of Dkedper Ezfpofx Agdeg profile of working profile depth 8mm Dimensions of the driving wheel (od x id x width) 220x125x125mm Øext.min. of driving wheel drive wheel 165mm Max. depth of profile of the driving wheel profile depth 8mm Grinding wheel motor power motor power 7,5Kw Motor power of grinding wheel driving motor power 0.75Kw Tilting angle angle of working working +/- 5º

See details

Advertise here