Filler separator classifier

Sturtevant 486 16 ft

Condition: refurbished (used), Year of construction: 1995, Dust separator, dry sand dephiller. Passing capacity 160 Tm/Hour. Motor from 50 kw to 150 KW depending on the needs. Current engine 75 kw. Gijdeim D S Sspfx Akyou New bearings. Inner linings anti-wear plate. Disassembled ready for transport. Vacuum system and hot air dryer.

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. Gijdpfx Asqt Dmyekyou When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: refurbished (used), overall weight: 7,800 kg, Jaw width: 650 x 450 mm Capacity: 12 - 60 cbm/h Gap width: 35 - 150 mm Weight: 7,800 kg Godpfx Aksq Tth Tsyjiu Power requirement: 45 kW Completely overhauled in the workshop and newly stored

Condition: new, Year of construction: 2025, Plant Type : Mobile Concrete Batching Plant with SINGLE SHAFT MIXER Gisdpfx Akoflz Hwoyou Plant Capacity: 60m³/ hour freshly compressed concrete Mixer Capacity: 1500/1000 lt (1m³ Compressed Concrete) Central Lubrication System Brand : ILC (made in Italy) Control System: Full automatic pc - plc – printer. Electronical equipment : Siemens Other equipment & accessories : Italian Unlimited users & Remote access The installation and startup of the plant is under our responsibility. 7/24 SERVICES. Exporting more than 1000 Concrete Batching Plants to more than 90 Countries. *EASY TRANSPORTATION *MINUMUM INVESTEMENT FOR FIELD GROUNDWORK *QUICK INSTALLATION

Condition: new, Year of construction: 2024, Genie S-45 Trax-XC (Xtra Capacity, up to 454kg load capacity), new, used, demonstration machines available Giedpfx Aorpzguokyju

Condition: new, Year of construction: 2026, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Here are some key features and considerations for a superfine ball mill for micro powder: 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. Gisdpeq Nf Uwefx Akyju 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Condition: used, Year of construction: 1973, pressure 200 t chamfer lenght 3600 mm distance between columns 2650 mm dayligth 500 mm Gjdpfet I D U Eox Akyoiu throat 300 mm stroke 250 mm working feed 10,5 mm/sec return speed 100 mm/sec ram stroke speed 150 mm/sec table height 900 mm oil volume 500 l total power requirement 37 kW weight of the machine ca. 17800 kg dimensions of the machine ca. 3710 x 1800 x 3390 mm Equipment: - Controlled axes Y1 + Y2 - Manual X-axis with digital position display - Set of upper and lower tools - 2x stop fingers - 2x front support arms - Hand and foot controls - Side + rear safety guard - Operating instructions

Condition: reconditioned (used), K.H.D. Calibrator 1300H . Without frame . With hydraulic-unit, electric motor and Voith Turbo coupling . Gjdpovt Su Iofx Akyoiu With new cone and shell . Overhauled, sandblasted and painted .

Condition: excellent (used), Manufacturer: Krupp Diameter: approx. 2,600 mm Length: approx. 3,600 mm Drive: 400 kW AEG Weight: approx. 18 tons Gsdpou Rrqnofx Akyoiu Can also be used as a ball mill Used grinding rods can be purchased additionally Spare gear rim, undrilled

Condition: good (used), Manufacturer: Takraf / Zemag Type: ZWB 630 x 800 -1 Giodpfjpxn D Isx Akyju Roll Dia.: 630mm Roll Width: 800mm Included frame and electrical motors.