Machining center

Thibaut 812V4

Condition: excellent (used), Year of construction: 2015, CNC glass milling and working centre NEPTUN QUICKMILL 160-30 NC Year of production: 2015 Milling, seaming of milled profiles and drilling (only with frontal head) Maximum working height: 1600 mm Maximum working length: 3000 mm Minimum glass size: 800 x 340 mm Glass thickness: 5 - 12 mm NC controlled (with software) Fgjdpfx Afjrzazyexjg Excellent condition Good working order, still in production As is Available immediately

Condition: excellent (used), Year of construction: 2012, operating hours: 8,200 h, functionality: fully functional, repeat accuracy: 0.3 mm, table width: 2,200 mm, type of input current: three-phase, workpiece weight (max.): 6,000 kg, table length: 3,200 mm, milling spindle speed (max.): 12,000 rpm, ____RoboMill 2KR240 S20BT40 TT6t TB16 WM1 Collected Next Generation Robotic Stone Processing Complex “NO CONCRETE FOUNDATION REQUIRED” The robotic complex presented here is based on a KUKA KRC2 robot from 2012. The system can also be supplied with: - used KUKA KRC4 robots, - brand-new KUKA KRC4 robots, - next-generation KUKA KRC5 robots. Our company also offers larger robotic configurations based on the KUKA KR360 / KR500 platform, available in both used and new versions. Additional configurations are available with: - fully automatic spindle and wire-frame exchange systems, - additional milling spindles, - wire-saw frames of various widths, - additional technological heads, - rotary tables with payload capacities of: - 10 tons, - 20 tons, - 30 tons, - additional protective safety fencing systems. Introducing RoboMill — an adaptive multifunctional robotic system designed for: - milling, - contour cutting, - wire-saw processing, - stone slab machining. The key feature of the complex is its monobase construction, where all major system components are integrated into a single steel platform. The robot, rotary table, electrical communication, air and water lines, spindle cooling system, positioning systems, tool banks, and auxiliary mechanisms are all mounted on one rigid structure. This engineering approach provides several major advantages: - preservation of system geometry even after transportation - elimination of concrete foundations Fsdszawm Hopfx Afxogg - rapid deployment at a new location - preservation of CAM-system mathematical accuracy without recalibration Installation requires only: - positioning the platform on the surface - drilling six anchor holes - fixing the structure using chemical anchors - connecting electrical power, compressed air, and water supply After that, the system is ready for operation. - Standard Configuration The complex is equipped with: - industrial KUKA robot - automatic 16-position BT40 tool bank - semi-automatic spindle and wire-frame exchange system - rotary table with payload capacity up to 6 tons - 3200 × 2200 mm slab-cutting platform for disk machining - integrated spindle cooling system - internal routing of electrical, pneumatic, and water communication ____Robot System Functions The robot memory contains: - semi-automatic spindle and wire-frame exchange programs - all 16 spatial tool pickup and return programs - external kinematic models of the rotary table - auxiliary positioning and safe-transition programs Because all components are rigidly fixed to a single monobase structure, the center distances between the robot, table, and technological modules remain unchanged even after transportation. This allows the CAM mathematical model to remain fully valid while minimizing setup and recalibration time after installation. ___RoboMill is not just a robot. It is a mobile industrial platform for modern automated stone processing.

Condition: used, Year of construction: 2005, Multifunction centre for machining glass, INTERMAC Type Master 23, year 2005 (1700 operating hours) Fgedpfjx Iuhrsx Afxeg

Condition: ready for operation (used), A used, but well-maintained SB 25 pillar drill is for sale, as shown in the pictures. Fgsdpfx Afoit Rfbjxjg

Condition: new, 40 mm M 24 M 30 spindle turning speed - stepless 160-2250 U/min MK 3 spindle stroke 120 mm throat 293 mm column diameter 115 mm Fodpfx Afeyvvq Dsxegg 515x360 mm distance spindle /table min./max. 117/701 mm 2 x 14 x 224 mm feed 0,1 + 0,2 mm/U Machine height 1840 mm

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, Machine type: Bandsaw - Semi-automatic Band dimensions: 3055 x 27 x 0.9 mm Cutting capacity (rectangular): 200 x 350 mm Cutting capacity (round): 260 mm Cutting speed: 18 - 87 m/min Main drive motor power: 1.5 kW Weight: approx. 460 kg Dimensions W x D x H: approx. 1700 x 1200 x 1600 mm Standard accessories: - Infinitely variable cutting speed via control panel with display - Raise/lower via control panel (hydraulic) - Manual vice with quick clamping, adjustable in length - Material stop - Emergency stop on control panel - Brush for band cleaning - Coolant tank: 17 litres Fjdpox Narljfx Afxogg - User manual in English Options: - 2 pcs. 2-meter standard roller conveyors without measuring scale - 1 pc. saw band 3,055 x 27 x 0.9 mm Available end of April 2026

Condition: used, functionality: fully functional, travel distance X-axis: 3,650 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, total height: 3,300 mm, total width: 8,800 mm, total length: 6,600 mm, table width: 2,200 mm, table length: 4,000 mm, overall weight: 10,500 kg, cutting length (max.): 3,500 mm, cutting width (max.): 2,000 mm, CNC cutting line with two interpolated 5-axis spindles, mounted on two opposing independent beams, with a belt table, for full-depth or incremental cuts on marble, granite, engineered stone and similar workpieces. Fgsdpfoxdi Agox Afxsg

Year of construction: 2018, operating hours: 3,758 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 5156, GMM rotating head bridge saw with vacuum separator Support travel distance: 3600 mm Support height adjustment: 700 mm Extension of bridge rails Y-axis to 5400 mm Maximum blade diameter: 825 mm for cutting depth approx. 300 mm Saw motor power: 23.5 kW Stepless speed control: 800 - 6000 rpm Tilting table with hydraulic tilt: 3500 mm x 2000 mm Table extension: 3500 mm x 430 mm Saw table with rubber table covering Removable table stops Vacuum lifter for automatic separation of workpieces Camera Automatic material measurement Automatic tool measurement Central lubrication Air conditioning Fedpfjy Iu Rasx Afxjgg GMM software including: - Milling - Drilling - Profiles - MiniCad - Cuts from CAD - Parametric shapes

Condition: new, Year of construction: 2026, CORMAK W16 Bench Drill Press for Metal with Tapping Function – Precise and Reliable Drilling Machine The CORMAK W16 metal bench drill press is a precise and reliable column drilling machine equipped with a tapping function. Designed for professional applications, it is suitable for locksmith workshops as well as industrial production lines. The integrated spindle rotation direction change system makes it an ideal solution for both drilling and internal thread cutting operations. Main advantages of the machine Tapping function with automatic spindle rotation reversal – provides full control over the process without the need for manual gear changes. Manual rotation direction change using a foot lever – allows precise tool retraction during special operations. High spindle rigidity – ensures accurate holes even during long operating cycles. Adjustable drilling/tapping depth setting – protects against exceeding the specified technological parameters. Tilting and rotating worktable – adjustment of ±45° horizontally and full 360° rotation around the column. Belt drive system – ensures quiet operation and reduced vibration. Built-in overload protection – safety limit switch installed in the belt transmission guard. Construction and technology The CORMAK W16 column drill press is based on a highly rigid cast iron construction, ensuring stable operation even with maximum quill extension. The spindle with an MK2 taper provides compatibility with a wide range of tools. The belt drive system offers five speed ranges (480–4100 rpm), allowing precise adjustment of operating parameters to the properties of the processed material. Precision and work efficiency Thanks to the 100 mm spindle quill stroke and adjustable drilling depth, the operator has full control over every stage of machining. The integrated tapping function makes the W16 a versatile machine for both drilling and thread cutting while maintaining high repeatability. The spindle speeds have been selected to provide optimal efficiency for drilling holes and producing metric threads in materials with different hardness levels. Applications The CORMAK W16 metal bench drill press is an ideal solution for: mechanical workshops and tool rooms, maintenance departments, assembly and production lines, technical schools and training centres. The machine is suitable wherever a precise drill press with tapping capability is required for machining steel, aluminium and engineering plastics. Standard equipment Self-locking B18 drill chuck MK2 drill chuck arbor Foot lever for changing rotation direction Belt transmission guard with limit switch Technical specifications Parameter Value Maximum drilling diameter 16 mm Spindle quill stroke 100 mm Spindle taper MK2 Spindle speed range 480 / 800 / 1400 / 2440 / 4100 rpm Fgjdpfsrif Iuox Afxsg Spindle axis-to-column distance 193 mm Table dimensions 200 × 230 mm T-slots (table/base) 18 mm / 14 mm Base dimensions 528 × 360 mm Maximum spindle-to-table distance 315 mm Maximum spindle-to-base distance 556 mm Horizontal table rotation range ±45° Table rotation around column 360° Motor power 750 W / 400 V Weight 90 kg

Condition: new, Year of construction: 2017, Storage location: 100224623 Transport dimensions (L x W x H): 0 x 0 x 0 ---- Standard equipment: 1b) Basic version with a 27.0 m outreach 2c) Radio remote control 2d) Small control panel 3a) Complete with pyramids 7) Current collector for continuous rotation 8) MICROMOVE positioning mode Fgsdpfx Ajzkz Hwjfxsg 9) Cast ballast with 4 x concrete ballast blocks of 910 kg each Location: Regensburg