Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
5
bore capacity in steel (diameter): 15 mm throat: 300 mm bore stroke: 114 mm spindle turning speed - continuous: 200-3000 U/min spindle taper MT: MK2 drill depth: 114 mm boring spindle diameter: 300 mm table-size: 315 x 220 mm distance - drill spindle & boring table-adjustable: min/max: 50/540 mm feed: manuell m/min total power requirement: 1,1 kW weight of the machine ca.: ca. 350 kg Bndv9dpm space requirements of the machine approx.: B:0,5 x T:0,9 x H:1,9 m boring table swivelling 60° machine... more
2

Pillar Drilling Machine ALZMETALL AX 2

Bünde bei BielefeldGermany dealership location
6460 km
1987
used
bore capacity in steel (diameter) 18/23 mm throat 250 mm bore stroke 90 mm speeds 10 / 200-2500 U/min Ncbmj spindle taper MK 2 table-size 250 x 250 mm total power requirement 0,37 / 0,55 kW weight of the machine ca. 130 kg dimensions of the machine ca. 0,4 x 0,77 x 1,7 m Electric 380 Volt Speed change via V-belt disc 10 speeds switchable via pulley and pole-changing motor. Machine dealer with own stock of 2500 m² and certification of the database "Machineseeker". more
2
Drilling capacity 16 mm Tool holder MK 2 - short sleeve Drill bit feed pneumatic with chip exhaust Throat depth 255 mm Woujm20ky Pinolhub 100 mm Table size 360 x 220 mm Column diameter 100 mm Spindle speed 230-4700 RPM 12 steps Digital speed display Motor output 0.8 and 1.1 kW Power supply 380 v, 50 Hz Speed adjustment on the belt in 6 steps to kill + 2 engine speeds table height adjustment with hand crank Dimensions L x W x H 580 x 550 x 1750 mm Weight approx. 160 kg good conditi... more
3

Ambos FLOTT 15 mm

EislingenGermany dealership location
6698 km
used
bore capacity in steel (diameter):15 mm throat:300 mm bore stroke:90 mm table surface area:220 x 220 mm distance spindle /table:110 - 610 mm spindle taper MT:1 turning speed range:200 - 3000 U/min turning speed range::6 Stufen column diameter:100 mm total power requirement:0,75 kW Y7khiro9r weight of the machine ca.:240 kg dimensions of the machine ca.:0,6 x 0,88 x 1,8 m more
1

ALZMETALL AX 3/S

Brechhausweg 4, 73488 Ellenberg, DEGermany
6715 km
2000
good (used)
Bby3prlctw more
1
Drilling capacity up to 13 mm Speed range 200-3.200 min-1 12 settings 7deke0u more
8
Technical data: Recording MK2 Gb3922gkq Dimensions total 1, 9 m H * 1m deep * 0, 5m wide Table 400 * 500mm Distance Bohrfutternitte from the column approximately 300mm Speed range 1 65 240 1/min / / 240-875 1 / min Speed range 2 130-480 1/min / / 480-1750 1 / min more
5
Drilling capacity: 16 mm Column diameter: 85 mm Quill stroke: 100 mm Projection: 180 mm Table size: 310 x 280 mm Dimensions: 350 x 750 x 1050 mm Weight: 108 kg F9t9ly0vq The machine is in very good condition. A visit under current is possible in our showroom at any time. All information without guarantee. more
1
OPTIdrill B 17PRO - bench drilling machine Bench and column drilling machine with belt drive Easy to use security switch to IP 54 with undervoltage release and separate emergency stop pushbutton 400 Volt models with right/left rotation Drilling depth stop Precision machined table with diagonal T-slots Height adjustment of the drilling table with rack and pinion Drill table ± 45 ° tilt and 360 ° V-belt cover with safety switch Aluminium die-cast tailstock lever from one piece with Soft... more


Pillar dri...
every day

New machines via email!

Be informed!
3

Ambos FLOTT SB 15

More Flott Sb 15
EislingenGermany dealership location
6698 km
1953
used
bore capacity in steel (diameter):15 mm throat:280 mm bore stroke:90 mm table surface area:220 x 220 mm turning speeds:200 - 3000 U/min distance spindle /table:20 - 520 mm table vertical adjustable:500 mm total power requirement:600 W weight of the machine ca.:0,3 t dimensions of the machine ca.:800 x 400x1850 m column diameter:100 mm taper MK:1 Y7loakklt more
5
Drilling capacity -15mm Spindle taper MT2 Throat 295mm Drilling depth 110mm Spindle speeds 100-1500 rpm Table size 295x220mm Bawvnl3zbi MARCELS MASCHINEN CH more
6
Zum Verkauf steht folgender Artikel: Mzfxd - Revolver Saeulenbohrmaschine - Brown & Sharpe - mit 6 Bohrfutter zum Wechseln - Unter dem Bohrfutter sitzt ein Splint, der gedrueckt werden muss zum Wechseln des Bohrfutters - Spanntisch circa 620x560mm - Hoehe max. 2400mm - Breite ca. 890mm - Tiefe ca. 1400mm - mit Wasser und Druckluftanschluss - im aktuellen Laufbetrieb waren es circa 200 u/min laut der analogen Anzeige(die Geschwindigkeit laesst sich vermutlich noch verstellen, was aller... more
1
Vertical drilling machine afloat in good technical condition. Speed control of belt apportionment 9acc2bksg 5 speeds Tool holder MK2 Table of rack height adjustable more
4

Column drilling machine CORDIA S18

D - Nordrhein-WestfalenGermany dealership location
6437 km
1975
used
Column drilling machine Fabr.CORDIA type: S18 Bj.ca. 1975 Spindle speeds of 90-1450U/min spindle retainer: MK2 Max spindle stroke: 120 mm 9gpexclki Table: 350X400mm Machine height: 1.9 m more
2
gebr. Column drilling machine make FLOTT Model SB 16 ST. Nr. 261620402 89lpeamo Spindle mount MT 2 Drilling capacity 16/20 mm Drilling depth 100 mm Throat depth 250 mm Table size 220 x 360 mm Spindle speed continuously variable 300-2800 RPM Motor 380 V 1,1 KW External dimensions: Width 500 mm Depth 600 mm Height 1800 mm Weight approx. 175 kg more
4
Thread cutting performance M 10 thread depth 80 mm Throat depth 250 mm Table size 290 x 350 mm Spindle speed 120-600 R/min Quill stroke 80 mm Thread cutting capacity of min. 3 mm Height 370 mm Total power consumption 0.55 / 0.75 kW Baybuv3wzv more
1
Threaded drill Fabr. HAGEN & GOEBEL type HG 10 Rcwbiohmi Masch.# 4478 in column design Technical data: Power ST 50 / ST 60 M 3 - M 10 Power GG M 3 - M 16 Performance brass M 3 - M 18 Spindle mount MT 2 Spindle stroke 80 mm 6 spindle speeds 200-1000 rpm. 1.5 return speeds Power 0,6 / 1,2 kW Weight approx. 200 kg External dimensions approx. 1050 x 750 x 1550 mm with -Guide cartridge device -height adjustable table -Hand lever -Foot pedal used, in very good condition more
5
Zum Verkauf steht folgender Artikel: - Flott Typ 15mm Saeulenbohrmaschine - gebraucht Naaw7 - funktionsfaehig - optischer Zustand gemaess Fotos - Verkauf exakt wie auf Fotos zu sehen Details: - aktuell mit MK1 Aufnahme und kleinem Schnellspannbohrfutter - Drehzahl am Keilriemen verstellbar, Geschwindigkeiten siehe Fotos - T-Nuten Spanntisch ca. 300x280mm - max. Abstand vom Spanntisch bis zur MK Aufnahme ca. 600mm - Hoehe ca. 180cm - Fussabmessung unten ca. 550x420mm - Spindelhub c... more
4

Column drilling machine Gillardon GB16

D - Nordrhein-WestfalenGermany dealership location
6397 km
used
Column drilling machine Manufacturer Gillardon Type GB16 Infinitely variable speed control and 2 pole motor Tachometer Bdr2mdraa more
6
Technical data: -Drilling capacity 25 mm -Gewindebohrleistung M 16 - spindle mount MT 3 -Spindle speed 100 / 205 / 345 / 440 R/min Mzlap -695 / 885 / 1450 / 2900 R/min -Drilling spindle stroke 130 mm -Spindle unloading 260 mm Coordinates table with 3 T-slots 580 x 240 mm -Table travel X-axis 415 mm Y-axis 155 mm - powered 400 V / 0.75 / 0.9 kW -Space requirement approx. B 900 x H 1800 X 700 mm -Weight approx. 270 kg more
2
Gebr. Column drill Make FLOTT Model SB 16 mach.-No. .: 191 600 122 Spindle holding fixture MT 2 Drilling capacity 20/16 mm projection 250 mm depth 100 mm Table size 360 ​​x 290 mm 6 spindle speeds 430 4500 rpm motor 0.75 kW Outer dimensions: width 450 mm depth 550 mm Height 1750 mm Weight approx 175 kg Wxycytfz2 more
2
gebr. Column drilling machine make FLOTT model SB 16 ST. Nr. 261620402 spindle mount MT 2 drill performance 16/20 mm depth 100 mm projection 250 mm table size 220 x 360 mm spindle speed continuously variable 300-2800 RPM motor 380 V 1,1 KW dimensions width 500 mm tie Fe 600 mm height 1800 mm weight approx. 175 kg Mvift more
1
Column drilling - and threaded drill Fabr. IXION type BSS 13 GLV Masch.# 8106 Technical data: Drilling capacity 13 mm Gewindebohrleistung M 5 - M 18 x 1.0 4 spindle speeds 160-800 RPM. Throat depth 220 mm Column diameter 75 mm Table size 220 x 220 mm External dimensions approx. 400 x 600 x 1650 mm with -Guide cartridge device -Thread cutting device Srxxvg -Footswitch for R + L - run used, in good condition more
4

pillar drilling machine IXION BS15

D - Mecklenburg-VorpommernGermany dealership location
6583 km
1990
used
drilling diameter max: 18mm throat: 215mm table length x width: 310x285mm spindle way max.: 100mm rotational speed max.: 3.800 1/min M2qat rotational speed min.: 240 1/min table - spindle distance max.: 850mm tool fitting: B16 equipment: - table wit T-notches, height adjustable and swiveling - ground plate with T-notches more
4

Drilling machines Flott B15

D - BerlinGermany dealership location
6745 km
used
Speed: 200 / 340 / 600 / 1000 / 1700 / 3000 rpm. Chuck: Chuck 1-13 mm 3wblkagcb Recording: MK2 Quill stroke: ca. 110 mm Weight: 280 kg more
6
Drilling capacity 16 mm spindle taper MK2 projection 195 mm 100 mm Max 590mm Pinolhub btw Drill spindle and table Table size 500 x 300 mm column diameter 100 mm spindle speed 280 -.. 4500 rev / min. Motor power 0.75 kW Power supply 380 V, 50 Hz 6 Belt stairs from the engine and 6 strap stages to the drill spindle drill head height adjustment via crank rack to the column space L x W x H 700 x 500 x werkstattgeprüft 2000 mm Weight about 200 kg Lpws9 more
2
gebr. Column drilling machine make FLOTT model SB 16. No.: 191600122 spindle mount MT 2 drilling capacity 20/16 mm projection 250 mm depth 100 mm table size 360 x 290 mm 6 spindle RPM 430 – 4500 RPM motor 0,75 kW dimensions: width 450 mm depth 550 mm Height 1750 mm weight approx. 175 kg Wgnzk more
5
150-3000 U/min P0qczecr Pillar drill more
1
Alzstar 18-T/S Drilling capacity steel E335 (St 60): 18 mm 8ltvhjkg Thread-cutting steel (St 60): M12 Cast iron (EN-GJL-200): M14 Short spindle: MK 2 Spindle stroke: 80 mm Throat depth: 190 mm Column diameter: 65 mm Machine table, usable Edition: 300 x 240 mm T-slots, number x width x distance: 2 x 12 x 80 mm Distance spindle nose to table min./max. 75/357 mm Feed: Hand Machine height without options about: 840 mm Net weight approx.: 110 kg Drive: continuously variable Engi... more
4
Bench drilling machine Make: MAXION Model: UNIMAX 1 TAP Condition: new machine Spindle speed (continuous): 200-4,000 rpm Standard ALB ear power: 18 mm equipped as standard with: D8hab7 -Thread cutting device -Digital speed display -Digital boring depth display -Table adjustment via rack and pinion -Manual more
6
BERNARDO SAEULENBOHRMASCHINE TYPE SBM 20 VARIO - MK2 - 310/1950 t / m - Variomatic - draait right- en linksom - Digital törental uitlezing - Digital boordiepte uitlezing - Laser voor boorpunt bepaling - Panel 305 x 305 mm - panel is draaibaar - Noodstop - Beschermkap - Documentatie - 400V THE PRICE IS plus VAT DUTCH MACH Metalworking machinery ENSCHEDE -. NETHERLANDS (3 km from the German border) Rot9p2oj2 more
5

column- / drill press qteck GmbH SAL-16

D - NiedersachsenGermany dealership location
6518 km
2016
new
SAL-16 - The professional drill press for commercial, industrial and hobby This drill press is characterized by by their extremely robust design and reliable operation. TOP equipment is hard to beat for value for money. Continuous speed adjustment during operation, without complex folding of the strap through bevel gears. Lots of accessories, among others with laser dot for accurate parallel holes and and and ..... Features (Highlights): Robust steel design with stand Fixed at the bottom s... more


Pillar dri...
every day

New machines via email!

Be informed!

to

to

Change search

SELL IMMEDIATELY
on Europe's market leader for as little as € 0,49 per ad.
Find out more now


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close