Industrial robot

Universal Robots

Condition: like new (used), Year of construction: 2020, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 20205500907, overall weight: 35 kg, load capacity: 5 kg, arm reach: 850 mm, pivoting range: 360 °, teach pendant manufacturer: Universal Robot, The Universal Robots UR5e with Teach Pendant is an industrial robotic arm assembly designed for handling tasks. It has a reach of 850mm and a payload capacity of 5kg. Manufactured by Universal Robots in Denmark, this UR E-Series Flex Pendant includes a motion controller for precise operation. Ideal for automation across various industrial environments, this robotic arm provides flexibility and efficiency for both repetitive and complex tasks. The robot was purchased in 2021 and was only powered on to verify correct operation. It has never been put into actual use and is therefore in like-new condition. The total operating time is approximately 1 hour. Seller: SANXO-Systems Finnish-Hungarian Measurement and Automation Ltd. Kjdpfxox Tg E Ts Ab Tsdh

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Kjdpfx Ajwp Rqfob Tsdh Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: like new (used), Year of construction: 2022, operating hours: 700 h, functionality: fully functional, overall weight: 50 kg, load capacity: 12 kg, arm reach: 1,300 mm, repeat accuracy: 0.01 mm, Universal Robots UR10e – As good as new – Only 700 operating hours For sale: a Universal Robots UR10e cobot in excellent condition. This robot has only been in use at our facility for six months for testing purposes and has seen very limited operation. Total powered-on hours: approx. 700 hours (± 26 days) Actual productive hours: maximum 100 hours Technically and visually in perfect condition Equipped with the latest software version: Polyscope 5.25 The robot has always been used in a clean test environment and handled with great care. There is no production-related wear. This is, in fact, an almost new UR10e with very minimal usage. Please note: the original packaging is no longer available, but the set is otherwise complete and fully operational. The UR10e is renowned for its high precision, flexibility, and easy integration into various automation applications. With a payload of 12.5 kg and a reach of 1300 mm, this cobot is highly versatile in both production and testing environments. An excellent opportunity to acquire an almost new UR10e at an attractive price. Kjdpeyhqf Ejfx Ab Todh Transport can be arranged at additional cost.

Condition: used, Year of construction: 2021, Robot Cobot Universal Robots UR5 Year of manufacture: 2021 Number of axes: 6 Max. payload: 5 kg Max. working range: approx. 850 mm Kdsdpfeyibu Dox Ab Tjh Scope of delivery: Robot, controller, cables, teach pendant 2 weeks commissioning warranty. No further warranty provided. Spare parts are available from stock at all times.

Condition: new, Year of construction: 2026, A550 Fully Automatic Solid Wood Saw 4.5 m Fully automatic cutting of medium-large wood with simple-to-use automation. Put down any wood and the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Your fully automatic saw can optionally come as an inline optimiser saw. For every piece of wood you place down to cut, no matter what length, a laser sensor will measure its length. Our powerful optimisation algorhithm then takes your cut list and calculates the best order of parts to cut from this wood so that wastage is minimised. All of this happens on-the-fly, during the machine operation process, and without needing any input from you. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. Kdedpfxof Ekm Hs Ab Tsh • Bundled / multi-bar cutting and counting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Fully adjustable saw cutting and wood feeding rates for maximum process productivity. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Inline direct-to-material printing with no operator action required (optional). • Bar codes or QR codes printing or scanning for jobs input (optional). • Automated servo positioning of the saw mitre angle up to ±75° (optional). Highly suitable for: • Frame and truss manufacture • Sheds manufacture • Furniture manufacture • Mitre timber structures manufacture • Bulk wood cutting Model: A550 Length: 4.5 m Material Length: 3180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: used, Year of construction: 2017, Universal Robots Cobot UR5 Robot Complete 5/2017 Year of manufacture: 5/2017 Number of axes: 6 Max. payload: 5 kg Max. working range: approx. 850 mm Scope of delivery: robot, controller, cables, teach panel 2 weeks commissioning warranty. No further warranty applies In addition, spare parts are available in stock at all times. Ksdpfx Ajyibukob Todh The robot is fully functional and can be inspected at any time.

Condition: like new (used), Year of construction: 2017, Universal Robots UR5 collaborative robot (cobot), complete, only approx. 4,487 operating hours Year of manufacture: 1/2017 Number of axes: 6 Max. payload: 5 kg Max. working range: approx. 850 mm Scope of delivery: robot, controller, cable, teach pendant 2-week commissioning guarantee. No further warranty. Spare parts are continuously available from stock. The robot is fully operational and can be inspected by arrangement. Kdsdpfx Ajyibt Tjb Tsh

Condition: ready for operation (used), Year of construction: 2020, An unused collaborative welding robot (cobot) Universal Robots with a Migatronic welding power source is available. 1) Cobot Universal Robots UR10, year of manufacture: 2020, load capacity: 10kg, reach: 1300mm, machine dimensions X/Y/Z: approx. 1600mm/600mm/600mm, weight: approx. 30kg, operating hours: 0h. 2) Arc welding power source Migatronic, year of manufacture: 2020. Documentation available. An on-site inspection is possible. Kdsdpfx Aexddayob Teh

Condition: like new (used), Year of construction: 2019, operating hours: 40 h, functionality: fully functional, machine/vehicle number: 201795000000, overall weight: 33 kg, load capacity: 12 kg, arm reach: 1,300 mm, pivoting range: 360 °, Equipment: documentation/manual, Please feel free to contact us for further information. Ksdpfx Ajyhdzmeb Todh

Condition: excellent (used), Year of construction: 2022, operating hours: 3,000 h, functionality: fully functional, machine/vehicle number: 20225202986, overall weight: 50 kg, load capacity: 12 kg, arm reach: 1,300 mm, pivoting range: 360 °, controller manufacturer: Universal Robots, controller model: UR10e, teach pendant manufacturer: Universal Robots, teach pendant model: UR10e, control cabinet width: 500 mm, control cabinet height: 500 mm, input voltage: 240 V, input current: 8 A, type of input current: AC, Equipment: documentation/manual, Universal Robots UR10e collaborative robot 1300 mm reach, 12.5 KG payload Controller & Teach Pendant included Sale Price: £25,000 (inc VAT) Specifications & condition: - Model: Universal Robots UR10e collaborative robot - 1300 mm reach - 12.5 KG payload - Condition: Used for lightweight photographic work for approx 4 months. Otherwise unused. - Condition: Excellent - minimal wear from professional use. - Serial Number 20225202986 - Under 3000 hr runtime Kdodpfeyg N I Nox Ab Tjh Complete Package includes: - Controller - Teaching pendant - Original boxes and documentation Original Value in 2023 £32,000 Purchased from WHM Robotics

Condition: excellent (used), Reach: 850 mm Payload: 5 kg Robot weight: 18.4 kg Protection class: IP54 Included: - Touchscreen tablet - Robot arm - Robot controller QUANTITY: 2 ROBOTS, PRICE PER UNIT Kdodpfxowtp Tye Ab Tjh Year: 2018 Reach: 850 mm Payload: 5 kg Robot weight: 18.5 kg Number of axes: 6 Gripper: included Control: touchscreen tablet + controller The price includes only the robot arm with the controller and control cabinet, excluding any additional equipment shown in the photos.

Condition: excellent (used), Model: UR-6-85-5-A Serial number: 2011203044 Year of manufacture: 2011 Kjdpewu Dnhefx Ab Tedh Weight: 17.8 kg Maximum load capacity: 5 kg Country of manufacture: Denmark