Paper Production Line 7500 mm

Valmet / Beloit

Condition: used, Year of construction: 1991, functionality: fully functional, Heidelberg MOZP (1991) – 2-Color Offset Printing Press with Perfecting (1/1 or 2/0) Short Technical Description / Summary High-performance 2-color sheetfed offset press Heidelberg MOZP, year 1991. Features an integrated perfecting unit (P) allowing dual capability: printing 2/0 (two colors on one side) or 1/1 (one color on both sides in a single pass). Renowned for exceptional registration accuracy, high durability, and consistent print quality. Key Technical Specifications Manufacturer: Heidelberger Druckmaschinen AG Model: MOZP (P = Perfecting / Свртувач) Year of Manufacture: 1991 Serial Number (Masch. Nr.): 612 123 Country of Origin: Germany Number of Printing Units: 2 colors Max. Sheet Size: 480 x 650 mm (18.9" x 25.6") Min. Sheet Size: 140 x 185 mm Max. Printing Speed: Up to 10,000 sheets/hour Plate Size: 525 x 650 mm Weight: approx. 5,200 kg Features & Equipment CPC 1-01 / CPC Control Desk: Centralized remote ink and register control console. Perfecting Unit (1/1 or 2/0): Quick convertible unit for straight printing or perfecting options. Alcolor / Standard Dampening System: Continuous dampening system for fast ink-water balance. Powder Sprayer: Integrated anti-setoff powder spray device. Quick-action plate clamps for fast job changeover. Standard stream feeder and high-pile delivery. Psdpfezur E Sjx Afuerb Condition & Availability Condition: Used, clean, visually very good, well-maintained in a professional printing environment.

Condition: good (used), JBT FMC Foodtech autoclave / retort in nice condition with upgraded controls. Has come direct from a European pate producer. Single door, 1.4m diameter 6 trolley capacity. We also have 2 x 4 trolley A144 versions from the same factory. Podpfx Aorzbfcofuerb

Condition: ready for operation (used), Year of construction: 1983, Offset printing machine ULTRAMAN VII AGS/1983 Maximum sheet size 1120x1600 mm Minimum sheet size 600x800 mm Printing on 5 color groups + 1 dispersion varnish group IR drying alcohol dampening and cooling Quick action plate clamps Pjdpfx Aoy U Ufdsfujrb The machine is in good working condition.

Condition: used, Year of construction: 1973, spindle diameter 130 mm x-travel 3000 mm y-travel 2000 mm total power requirement 4,5 kW weight of the machine ca. 30 t Spindle Ø 130 mm Spindle taper SK 50 Working range: X = column, longitudinal 3,000 mm Y = headstock, vertical 2,000 mm Z = spindle stroke 1,000 mm Lower table 3,300 x 2.400 mm Pjdst Hwt Sjpfx Afuorb Max. weight on table 10 tons/m² Min./ max position of work spindle above table 770 / 2,770 mm Feeds 0.9 - 2,000 mm/min Quick feed for headstock and column 5,000 mm/min Quill feed 0.5 - 1,200 mm/min Speed range, partially infinitely variable 4.5 - 1,250 rpm Weight, approx. 30,000 kg Accessories / Special Features * HEIDENHAIN Digital Display for 3 axes. * Hardened guideways. * Ball screw spindles. * Infinitely variable spindle speeds and feeds. Feeds can be individually driven with motor. * Moving operating platform. * Hanging control panel. * Manual operating control. * Platform. * Hydrostatics in the column displacement. * Mounting plate 3,200 x 2,500 mm, planed, with t-slots. * Top table approx. 1,400 x 2,600 x height 900 mm, one face is handled. * Hydraulic clamping of column and slides. * Motor driven tool clamp. * Lots of accessories, including tool holders with and without tools, separate chip extractor, clamping aids, 1 angle plate, and other plates. Lots of other accessories. This is a strong machine which is very suitable for heavy cuts and therefore ideal for the machine tool industry and for tool manufacturers. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest. We have other horizontal borers on stock. Please let us know what you need.

Condition: used, Year of construction: 2009, greates pass round over bed 640 mm swing diameter over face slide 435 mm control SIEMENS - 840 D turning speed range 3 - 2.500 U/min centre distance 2.000 mm spindle bore 70 mm spindle diameter in front bearing 100 mm Predpozaf Hnjfx Afujb Lathe - cycle-controlled | VDF-BOERHRINGER - DUS 630 ti The machine is in good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DUS630ti | DUS 630ti | DUS 630 ti

Condition: used, This listing is for the Agilent Cary 1260 infinity HPLC system The units are in full working condition and are ready for immediate use The Agilent Cary 1260 Infinity HPLC system is a robust and versatile high-performance liquid chromatography platform engineered for reliability, high throughput, and analytical precision. It's widely used in pharmaceutical, environmental, food, and chemical analysis The system's modular architecture allows for tailored configurations, enabling users to select components such as pumps, detectors, and sample managers to meet specific analytical needs. This flexibility facilitates upgrades and maintenance, ensuring the system can evolve alongside technological advancements and changing laboratory requirements. This combination includes the following part Nos. G7111A Quat Pump G7111 Purge Valve G7129A Vial Sampler G7115A Diode Array Detector Pedpfx Ajxv A Sljfujrb G7115 Preparative Flow Cell 160 Infinity R1 Detector Pressure Range: Up to 600 bar, accommodating smaller particle size columns for higher resolution and faster separations. Supports a wide flow range, up to 10 mL/min at 200 bar, suitable for standard to semi-preparative applications. Injection Volume: Flexible injection volumes ranging from 0.1 µL to 1800 µL, depending on the configuration and options selected. Column Capacity: Supports up to four columns with direct access to each column through a Quick-Change switching valve, enhancing flexibility and eliminating the need to disconnect and reconnect columns. Temperature Control: Features efficient column handling and temperature control, with options for multiple temperature zones, ensuring optimal conditions for various applications.

Condition: new, Year of construction: 2026, A superfine ball mill is a type of milling machine that is used to grind materials into very fine particles. This type of ball mill has some distinctive features that make it especially suitable for processing even the hardest materials with low contamination and minimal wear. It is commonly used in various industries, including pharmaceuticals, minerals, pigments, and chemicals, for producing micro powder or nanoparticles. Here are some key features and considerations for a superfine ball mill for micro powder: 1. High Grinding Efficiency: Superfine ball mills are designed to achieve high grinding efficiency by utilizing grinding media with a relatively small size, leading to a large surface area for grinding. 2. Precision Control: These mills often come with advanced control systems to regulate parameters like rotation speed, temperature, and grinding time, allowing precise control over the particle size distribution. 3. Specialized Design: The mill is typically designed with features to minimize contamination, such as using materials resistant to wear and corrosion. Some mills also have cooling systems to prevent overheating during the milling process. 4. Variety of Materials: Superfine ball mills can handle a wide range of materials, including both brittle and fibrous substances. They are often used for milling hard materials that require fine grinding, such as ceramics, minerals, or pigments. 5. Size Reduction to Micro or Nano Level: The primary goal of a superfine ball mill is to reduce particle size to the micro or even nano level. This is achieved by the intense grinding action that occurs within the mill. 6. Classifier System: Some superfine ball mills incorporate a classifier system to control the particle size distribution more precisely. This allows for the separation of fine particles from coarser ones during the milling process. 7. Batch or Continuous Operation: Depending on the specific design, these mills can operate in either batch or continuous mode, offering flexibility based on the production requirements. 8. Safety Measures: Safety features may be included, such as monitoring and control systems to prevent overloading, overheating, or other potential issues during operation. Predpfsq Nf Uwsx Afuob When selecting a superfine ball mill for micro powder production, it's important to consider the specific requirements of your application, the characteristics of the materials you're working with, and the desired final particle size distribution. Always follow the manufacturer's guidelines for operation, maintenance, and safety to ensure optimal performance and longevity of the equipment.

Condition: excellent (used), Year of construction: 2021, operating hours: 3,000 h, travel distance X-axis: 6,100 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 950 mm, CNC Travelling Column Milling Machine – Fully Retrofitted by REM (2021) Powerful and versatile heavy-duty milling machine, completely modernized by REM specialists in 2021 with state-of-the-art Heidenhain TNC 320 control. Ready for immediate production use. KEY SPECIFICATIONS: • X-axis (transversal travel): 6,000 mm • Y-axis (vertical head travel): 2,000 mm • Z-axis (axial slide travel): 950 mm • Dual-spindle head | Head rotation: 360° • Spindle speed: 1,000 – 4,000 rpm • Spindle taper: ISO 50 (automatic locking/unlocking) • Head dimensions: 290 × 290 mm • Spindle motor power: 15 kW (DC) • Machine weight: approx. 32 tonnes • CNC Control: Heidenhain TNC 320 Podpfxen D N H Te Afuorb WHY BUY FROM REM? ✔ Machine fully inspected and tested in working conditions ✔ Modern CNC retrofit – new electrics, new drives ✔ Documentation and technical support available ✔ Export worldwide | Competitive shipping Ideal for heavy component machining in aerospace, energy, and heavy industry. Contact us today for full technical specifications, photos, and video demonstration.

Year of construction: 2016, condition: ready for operation (used), The Coiltech Decoiler Straightener Feeder System is a compact press feeding system. Belt width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler tonnage: 6000kg, diameter (inner), min-max: 470-520mm. Connected load: 7.5kW, with documentation. Prsdpei El Ucsfx Afuob

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Pedpfsh Nypfex Afusrb