Stainless steel Big bag filling machine filling station

VD Procestechniek

Condition: ready for operation (used), Year of construction: 2015, A lightly used Clayton quick steam generator including water treatment in container design is available. Operating overpressure: 10bar, operating temperature: 184°C, pressure vessel volume: 235l, heating surface: 27.5m², steam capacity: 1253kg/h, output: 786kW, test pressure: 15bar, fuel: natural gas H, fuel heating value: 33200kJ/Nm³, burner output min./max.: 281kW/843kW, max. gas pressure regulator/burner: 40mbar/25mbar, nominal gas flow: 91.4Nm³/h. Overall system dimensions X/Y/Z: approx. 6300mm/2450mm/3000mm, weight: approx. 6000kg, operating hours: under 4000h. The system was tested at the end of 2023 and in mid 2024. Documentation available. On-site inspection is possible. Fodpfxsx Srphj Aa Aopf

Condition: refurbished (used), Year of construction: 2007, functionality: not functional, UNTHA RS30 SB-460 Year of manufacture: 2007 Used - Damaged Number of rotors: 4 Grinding chamber: 460 x 500 mm Fedpfx Aaexn Iwko Aopf New blades: 1Z-66, 8Z-66 Motor power: 2 x 11 kW, 380 V, 50 Hz New sieve holes: Ø 30 mm Length/Width/Height: 1340/1250/1970 mm Weight: approx. 1100 kg

Condition: used, Power generator, emergency power generator, generator, power generator, power generator, emergency power generator -Power: 3 kW -Engine: Briggs & Stratton Fodpfx Aasdparyo Ajpf -Sockets: 2 x 220 V lighting current -Dimensions: 820/620/H460 mm -Weight: 60 kg

Condition: good (used), Manufacturer: Haver & Boecker Documentation available Fpsdpfev Sz Tdex Aa Aef Mechanical conversion from 50 kg to 25 kg bags in 1999 Control system: Siemens S7 Upgraded to the latest standard with spare parts support in 2015 Supported bag types: Quicklime, hydrated lime, cement, gypsum

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: Fpsdewp Rqfopfx Aa Ajf • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Year of construction: 2025, condition: new, The RS-9 shredder has been specially designed for effective processing of various types of papers, taking into account the specifications of the punching machine it will cooperate with. Fpedpfx Aaoiklxbo Aef The shredder enables the quick and safe shredding of paper directly received from the die-cutting machine for easy transport via a conveyor system to the baler. Our machine is not only easy to operate but also economical to maintain. It features advanced Siemens control that protects against overload. Additionally, the frequency converter ensures smooth start-up and precise motor control. We also design waste disposal systems from multiple punching machines to one shredder, allowing for fast and maintenance-free material packing into a baler. Feel free to contact us.

Year of construction: 2012, condition: excellent (used), Alfa Laval Centrifugal pump Type LKH 85/240, 25,0 kW , Stainless Steel. Used! Good condition! Inlet: 6" - Outlet: 6" Fpodjhck S Eepfx Aa Asf

Condition: ready for operation (used), Year of construction: 2002, There are zwei identical vertical bag filling machines available, weight: 1.1t. Fpodjnfvxzspfx Aa Ajf

Condition: like new (used), Year of construction: 2012, operating hours: 27,000 h, functionality: fully functional, pressure: 13 bar, operating pressure: 13 bar, For sale is a Jumag steam generator with oil burner. Gas burner available on request. The unit is in very good condition. Model DG 360. Year of manufacture 2012. Steam output 360 kg/h. Max. steam pressure 13 bar. Delivery available at additional cost. On-site inspection possible. Please contact us if you have any questions. Fpjdpfxeydquro Aa Ajf

Year of construction: 1994, condition: good (used), Used M-Tec Ploughshare mixer Type MS-150 Batchmixer Minimal mixing volume 350 dm3 Fpodeir E E Eopfx Aa Aof Maximum mixing volume 1500 dm3 Motor 37kW 115 rpm Incl. Sampling unit specicon