BRUSHING MACHINE + SANDING MACHINE

WANDRES

Condition: used, machine/vehicle number: 007307, Max. working width: 3200 mm Max. working thickness: 60 mm Nwedpfx Aeuaq D Ajfuol

Condition: good (used), Year of construction: 2004, Peripheral devices Brand: Tool - Temp Type: TT - 157E Nwjdpeh Hbpwsfx Afusl Available: 14 pieces

Condition: excellent (used), Machine suitable for the polishing and the cleaning process (top & bottom) of panels. To be positioned on a motorised roller conveyor following a drilling machine, a double-sided edge bander or double-end tenoner - Top cleaning system (motorized rubbered cross belt with brushes) Motor power: Kw 0.19 - Bottom cleaning system (motorized rubbered cross belt with brushes) Motor power: Kw 0.19 Nwedeyw Rnyopfx Afuel - Max useful working width mm 3500

Condition: excellent (used), Machine suitable for the polishing and the cleaning process (top & bottom) of panels. Njdpfxsyw Rpqo Afujwl - Upper cleaning system (with 2 motorized rubbered cross belts with brushes) Motor power: Kw 0.19 - Lower cleaning system (with 2 motorized rubbered cross belts with brushes) Motor power: Kw 0.19 - Max working width mm 1500 ca.

Condition: like new (used), Year of construction: 2019, Vacomat 350 XP TWIN The Vacomat 350 XP TWIN is a high-performance dust extraction unit and a true energy-saving marvel among mobile dust extractors. Two frequency-controlled motors (5.5 kW each) ensure that the suction power is adjusted accordingly, especially under highly variable operating conditions. This ensures that only the energy that is actually needed is consumed. This dust extractor handles air volumes of up to 10,000 m³/h and is ideally suited for extracting dust from large CNC machines or entire machining centers. The innovative and highly intelligent control system automates the extraction process in conjunction with the connected machines. Extraction starts automatically as soon as a connected machining center is switched on. If the power requirement is lower, only one fan is started. As soon as several extraction points are in operation, the second fan is automatically switched on. As standard, the filter sleeves are cleaned automatically during operating breaks, as soon as all connected machining centers are switched off. Our patented filter shaking system then ensures gentle cleaning via a pneumatic/mechanical process using a compressed air connection (inlet pressure 6 bar, air consumption per cleaning cycle approx. 11 l). Optionally, and particularly recommended for very high and extremely fine dust concentrations, such as gypsum dust, an efficient pressure pulse cleaning system is available. The cleaning process via the compressed air tank takes place offline, after the extraction operation (NOTE: height then +100 mm and length +350 mm). Our Vacomats are manufactured using a modular system. As standard, the dust and chip mixture is discharged into four dust-tight chip collection containers (4 x 120 l) with durable plastic liners. A negative pressure channel securely holds the foil bags in the collection container. Viewing windows make it easy to check the fill level. Low energy consumption thanks to a modern, high-efficiency motor (IE3) "Made in Germany" and a flow-optimized internal housing with low air resistance. Heat recovery through a recirculation system: The warm exhaust air is filtered and fed back into the workshop. Low noise level: A double-walled filter sleeve housing absorbs the extraction noise directly inside the Vacomat. In addition, the fan housing is soundproof. Approved for indoor installation in the wood dust area - manufactured according to the new DIN EN 16770 standard. Healthy return air: High-quality, specially developed filter materials made of antistatic polyester needle felt filter out 99.9% of dust and chip waste from the air (dust class M for St 1 dust, according to TRGS 553). Nedpfozp Edwex Afuewl Increased safety through fire and explosion protection measures according to DIN EN 16770: pressure pulse tested up to 20,000 Pa, automatically activated powder extinguishing system - no water damage! Operational reliability: A pressure gauge continuously monitors the extraction performance. Error messages are displayed by the signal light. Low follow-up costs due to high-quality components and long service life of the filter medium: For example, an extra-large settling chamber ensures an initial separation of coarse chip waste. This prevents the filter sleeves from being additionally loaded with material. Low maintenance effort thanks to the maintenance unit on the motor console and easy access to the inside of the filter. All specifications according to the manufacturer.

Condition: excellent (used), Machine suitable for the polishing and the cleaning process (top & bottom) of panels. - Top cleaning system (motorized rubbered cross belt with brushes) Motor power: Kw 0.75 Nwodpfsyw Rqhjx Afujl - Bottom cleaning system (motorized rubbered cross belt with brushes) Motor power: Kw 0.75 - Upper (top) section lifting motor: 0.25 kW - Max working width mm 1300 ca. - Built-in control panel

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 06 08 20, compressed air connection: 6 bar, power: 3.5 kW (4.76 HP), input voltage: 400 V, input frequency: 50 Hz, We are offering this used WANDRES CF 05/2750 brush machine, manufactured in 2006. Type: CF 05/2750 Year of manufacture: 2006 Machine no.: 06 08 20 Voltage: 400 V Frequency: 50 Hz Power: 3.5 kW Compressed air connection: 3/4" Pressure: 6 bar Residual oil content: ≤ 1.5 mg/m³ Filter fineness: ≤ 40 µm The machine is sold including 2 new spare belts, with a value of approximately €1,000. If you have any questions or require further information, please feel free to send us a message or call us. The machine is disassembled and ready for loading. Nwsdjzfprdspfx Afusl

Year of construction: 2017, condition: used, Used machine Nwsdpfx Afex Rpgbeuol Year of manufacture: 2017 The Barbaric TSRET04 return system is a workpiece return unit for edge banding machines. It is the most basic version in the TSRET series and serves the following functions: - Transfers the workpiece at the end of the edge banding machine - Returns the workpiece to the height of the infeed of the edge banding machine Functionality After passing through the edge banding machine, the workpiece moves onto a roller table. The transfer is carried out by belt conveyors moving perpendicularly to the conveying direction, which rise from the roller table, lift the workpiece, transport it sideways, and set it down on a slightly lower roller table. This roller table conveys the workpiece to a belt conveyor. At the end of the belt conveyor, a non-driven, slightly inclined roller conveyor toward the edge banding machine’s infeed is connected. A stopper halts the workpiece at the end of the roller conveyor. Technical data - Max. load capacity: 60 kg - Max. panel size: 2,800 x 1,300 mm - Cycle time: max. 11 pieces/min Dimensions: - Return: 2,293 x 1,961 mm - Conveyor belt (L x W): 2,500 x 800 mm - Roller conveyor (L x W): 2,000 x 800 mm - Total length: approx. 6,943 mm - Total width: approx. 2,239 mm Availability: short-term Location: Flörsheim

Condition: new, • Usable width A (mm): 3200 • Order number: 6732601 Nsdofrux Aopfx Afuowl • Available: 2 units

Year of construction: 2004, condition: used, - working width (mm): 400 Nwsdpfx Afsnl D U Iouol - Brush: top and bottom - Spraying device

Condition: used, Year of construction: 1991, Technical details: grinding length: 600 mm grinding width: 375 mm workpiece height: 375 mm max. table load: 300 kg Nwjdpfxjxu D Huo Afujl grinding range: 350 - 600 mm Table dimensions: 900 - 350 mm magnetic plate size: 600 x 350 mm dimensions of grinding wheel: 300 x 50 x76,2 mm mm total power requirement: 12 kW weight of the machine ca.: 5,2 t dimension machine xH: 3,3 x 2,6 x 2,4 m dimension coolant device LxWxH: 0,8 x 0,8 x 0,8 m -Longitudinal table stroke = 700mm -transverse travel of table = 800mm Coolant pump *