Wenzel XO55
WENZEL XO55

Name: WENZEL XO55
Brand: WENZEL
Price: 29070 EUR
Availability: InStock

Fixed price plus VAT

€29,070

Year of construction

2008

Condition

Used

Location

Remscheid

Machine data

Machine type:: Wenzel XO55

Manufacturer:: WENZEL

Model:: XO55

Year of construction:: 2008

Condition:: used

Price & Location

Fixed price plus VAT

€29,070

Location:: Remscheid, NRW

Call

Details about the offer

Listing ID:: A21643563

Reference number:: 15479

Update:: 15.04.2026

Description

Coordinate Measuring Machine Wenzel XO 55 (Year of Manufacture 2008) in well-maintained and fully functional condition.

The machine is based on a stable granite structure combined with air-bearing guides. This allows the portal and axes to move almost frictionlessly and smoothly over the granite—a proven foundation for high measurement accuracy and repeatability.

The XO 55 is designed for reliable use in quality assurance as well as in series production and delivers consistent measurement results even during continuous operation.

Before delivery, the machine is inspected and test-run by our service technicians in Remscheid, ensuring full functionality.

The system is currently powered on and can be viewed and demonstrated at any time.

PC System (modernized):

After purchase, a completely new PC system will be installed, meeting WENZEL’s current requirements. This system is fully up to date and thoroughly tested before the machine is finally handed over to the buyer.

Optional Services (upon agreement):

- Installation and commissioning of the measuring machine within NRW
- Issuance of a factory calibration certificate
- Determination of length measurement uncertainty
- Determination of probing uncertainty
- Determination of repeatability range
- Execution in accordance with DIN EN ISO 10360-2:2010-06
- Maximum measuring volume diagonal: 4,660 mm
- Determination of probing uncertainty according to DIN EN ISO 10360-5:2020-11
- Including full documentation
- DAkkS calibration by the accredited Klostermann calibration laboratory
- Accreditation number: D-K-17518-01-00
- Accredited according to DIN EN ISO/IEC 17025:2018
- Training for the WM | Quartis measuring software
- Custom programming for your components

Itsdpfx Adeyyulns Sol
Additional Information:

On request, the machine can be retrofitted with the proven Renishaw SP25M probe. The retrofit includes additional service work and complementary hardware components, which will adjust the purchase price accordingly.

Additional software modules, custom adaptations, as well as individual accessories and clamping systems are available on request—optimally tailored to your specific measurement requirements.
Special features: Core drilling for installation with rotary-tilt frame
Included transport frame: On loan
Included services: Final inspection upon purchase | Disassembly and transport preparation | Packing | Loading onto customer-provided truck
Accessories: Stylus kit M2 | Mouse & keyboard | 2 × 24" TFT monitors | Printer
Exchange bridge: SCR200 (empty)
Joystick: HT400
Probe interface: PI200
head interface: PHC10-2
Probe module: 1 × TP200 Standard Force Module
Probe head: PH10T
Probing system: TP200
PC System: Windows 11 (current configuration)
Controller: WPC2030
Installed software: WM | Quartis R2026-1
Measuring range Z: 500 mm
Measuring range Y: 1.000 mm
Measuring range X: 500 mm

Seller

Last online: A week ago

Registered since: 2019

5 listings online

Call

Send inquiry

Telephone & Fax

+49 2191 ... show

Fax:

These listings may also fit your interest.

Listing

Universal machining center DMG MORI DMU 340 Gantry

Sankt Leon-Rot

7,889 km

Universal machining center
DMG MORIDMU 340 Gantry

Call

Condition: like new (used), Year of construction: 2020, operating hours: 9,422 h, functionality: fully functional, We are selling, on behalf of a client, a used, recent-model, like-new 5-axis machining center with a GANTRY design; model DMU 340 Gantry; year of manufacture 2020; 9422 operating hours; 2991 spindle hours. It features a SIEMENS CELOS operator interface. Isdpfxszx Ek Aj Ad Sjtl All specifications, technical data, or configurations of the machine are available upon request. The machine is available for demonstration and can be inspected immediately. Further original photographs are available upon request and after verification of your identity. A resale to dealers is not currently planned. Please refrain from making such inquiries.

See details

Listing

CNC turning and milling center Doosan Puma 2600SY II

Thurmaston

7,109 km

CNC turning and milling center
DoosanPuma 2600SY II

Call

Condition: excellent (used), Year of construction: 2022, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, 24 station turret, 22KW Motor, Main spindle 4000rpm, sub-spindle 4500rpm, Fanuc I series, Itsdpjzt Spnefx Ad Sjl 3 jaw chucks, swarf conveyor, tool setter, LNS barfeed unit.

See details

Listing

3D CNC coordinate measuring machine MITUTOYO CRYSTA Apex S 9168

Root

8,011 km

3D CNC coordinate measuring machine
MITUTOYOCRYSTA Apex S 9168

Call

Listing

CNC Coordinate Measuring Machine Mitutoyo Crysta Apex C 7106

Germany

7,870 km

CNC Coordinate Measuring Machine
MitutoyoCrysta Apex C 7106

Call

Condition: ready for operation (used), Year of construction: 2012, A Mitutoyo coordinate measuring machine overhauled in 2023 is available. Measuring dimensions X/Y/Z: 705mm/1005mm/605mm, max. workpiece height: 800mm, table dimensions X/Y: 880mm/1720mm, max. table load: 1000kg, resolution: 0.1µm, traverse speed: 520mm/s, measuring speed: 8mm/s. Machine dimensions X/Y/Z: approx. 1500mm/2000mm/2750mm, weight: approx. 2000kg, control: GEOPAK and CAT 1000 PS. Including various probe trees. Documentation available. On-site inspection is possible. Iedjx Ih A Nopfx Ad Sjtl

See details

Listing

Universal machining center DMG MORI DMU 50

Trossingen

7,963 km

Universal machining center
DMG MORIDMU 50

€169,000

~~€175,000~~

EXW Fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 2015, operating hours: 3,104 h, functionality: fully functional, machine/vehicle number: 11415741834, operating hours of spindle: 1,347 h, Equipment: chip conveyor, documentation/manual, DMG MORI DMU 50 – 5-Axis Machining Center – Excellent Condition – Only 1,347 Spindle Hours For sale is a meticulously maintained DMG MORI DMU 50 5-axis machining center from 2015. The machine was relocated to our facility in June 2026 and subsequently fully commissioned, geometrically measured, and technically inspected by the DMG MORI factory service. During this process, all functions were checked, the machine was realigned, the measuring probe was calibrated, and the kinematics were checked and corrected. Afterwards, a successful test run was performed without any issues. The machine is immediately ready for production. With only 1,347 spindle hours and approximately 3,104 operating hours, the machine is in exceptionally good technical condition. Technical data: • Control system: Siemens SINUMERIK 840D solutionline / CELOS • Spindle speed: 14,000 min⁻¹ • Machine weight: approx. 4,450 kg • Voltage: 400 V / 50 Hz Equipment: • 5-axis machining • Siemens SINUMERIK 840D solutionline / CELOS • Internal cooling (IKZ) • High-pressure coolant system • Chip conveyor Ijdeziz S Dspfx Ad Sstl • 3D measuring probe • Tool measuring device TT160 • Electronic handwheel • USB interface activated • CELOS user interface Maintenance / Service: DMG MORI Service, July 2026 The following work was carried out by the manufacturer: • Machine realigned • Geometry fully checked • Geometry report created • Measuring probe newly calibrated • Kinematics checked and corrected • Tool measuring device TT160 refurbished • Complete function test performed • Operator training provided The machine was subsequently fully inspected and approved by DMG MORI.

See details

Listing

5 axis vertical machining center Haas UMC-500

Thurmaston

7,109 km

5 axis vertical machining center
HaasUMC-500

Call

Listing

Coordinate Measuring Machine MITUTOYO Crysta-Apex S123010

Trittau

7,709 km

Coordinate Measuring Machine
MITUTOYOCrysta-Apex S123010

Call

Condition: used, Year of construction: 2014, x-axis 1.200 mm y-axis 3.000 mm z-axis 1.000 mm Ijdpfx Aszbc Hhod Sstl solution 0.0001 mm max. workpiece height 1.200 mm max. workpiece weight 3.000 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

See details

Listing

Coordinate measuring machine FARO Fusion

Jonschwil

8,031 km

Coordinate measuring machine
FAROFusion

Call

Condition: excellent (used), Year of construction: 2014, total height: 1,100 mm, total width: 300 mm, total length: 300 mm, overall weight: 60 kg, Equipment: documentation/manual, type plate available, FARO measuring arm, 7 axes, laser head, various measuring probes, heavy stand base for mounting, in original case; includes CAM2 software with dongle, Laser Line Probe V3, and various documentation. Isdpeyq R R Hofx Ad Setl

See details

Listing

Wenzel LH108 with Laser LC15 and Tp20 Wenzel LH 108

Bedizzole

8,243 km

Wenzel LH108 with Laser LC15 and Tp20
WenzelLH 108

€30,500

EXW Fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 2001, Wenzel Lh 108 automatic measuring machine Measuring range: 1000x1600x800 Head: Renishaw Ph10M Tactile Sensor: TP20 Probe changer: -- Controller: Pantec Eagle Iodpjipq I Iefx Ad Sotl Software: CMM Manager Lite 2024 Year of construction: 2001 Warranty: in terms to be agreed upon Description: machine fully functional and in excellent cosmetic condition: Pneumatic system completely overhauled;

See details

Listing

Vertical 5-Axis CNC Machining Center Kao Fong Machinery KFO-620-5AX

Germany

7,870 km

Vertical 5-Axis CNC Machining Center
Kao Fong MachineryKFO-620-5AX

Call

Condition: ready for operation (used), Year of construction: 2019, X-axis: 620mm, y-axis: 520mm, z-axis: 460mm, B-axis: -50° to +110°, C-axis smallest increment: 0.001°, distance from spindle nose to table surface B/C-axes: 140-600mm, B/C-axis rotary table diameter: 650mm, centering bore: Ø55H7x12, T-slots quantity/width/pitch: 5x18x100, max. workpiece dimensions: Ø520x330mm, max. table load (90°/horizontal): 200/300kg, max. spindle speed (standard) direct drive: 12,000/min, spindle bearing inner diameter: 70mm, rapid traverse X/Y/Z: 36m/min, working feed rate: 1-10m/min, rapid traverse B/C-axis: 25rpm, tool holder: MAS BT-40, number of tool positions: 40, max. tool length: 250mm, max. tool weight: 7kg, compressed air requirement: 0.6MPa / 500l/min, coolant tank capacity: 420l, connected load: 45kVA, control: Heidenhain iTNC 640 HSCI, length: 2325mm, width: 4210mm, height: 3108mm, weight: 9.5t, operating hours control on: 9,380h, machine on: 9,501h, program run: 3,141h, hydraulics: 8,371h, axes: 1,863h, spindle S1: 2,377h. Equipment: roller guideways in all 3 linear axes (Taiwan manufacture), spindle chiller, hydraulic unit, central lubrication system, oil separator, water gun, air gun, full enclosure, machine light and warning light, M30 machine shutdown, air conditioning unit for electrical cabinet, chip conveyor (scraper-type design), chip bin, work area flushing device, tailstock support for rotary table, roller guideways in all 3 linear axes, CE-compliant design, CTS (coolant through spindle), Heidenhain linear scales X/Y/Z, workpiece probing system, transformer, oil mist extraction unit, collision protection software, spindle thermal compensation, with documentation. An on-site inspection is possible. Itodpfxjzavyfe Ad Sjl

See details

Advertise here

Wenzel XO55WENZEL XO55

Machine data

Price & Location

Details about the offer

Description

Seller

Send inquiry

Telephone & Fax

Wenzel XO55
WENZEL XO55