Glue spreader

WINTER GLUEMAX SINGLE B-400

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Nksdow Sy T Hepfx Afzst Storage location: Nattheim

Condition: good (used), Year of construction: 2007, machine/vehicle number: 94323, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 150 mm, total height: 2,400 mm, total length: 4,400 mm, total width: 2,800 mm, overall weight: 3,130 kg, I will sell a MACHINING CENTER IN CONTINUOUS OPERATION CNC machining center Biesse ROVER 3.03 functional to view in Wadowice Nedpswpthtsfx Afzokt Feed X 3060 mm Feed Y 1260 mm Feed Z 150 mm Control type CNC XP 600

Condition: new, Year of construction: 2024, Osama Automatic 4-Roller Glue Application Machine Model: S4R/P-1400 Automatic gluing machine with 2 motors Working width: 1,400 mm Max. pass-through height: 0 - 100 mm Speed: 22 m/min Working height: 900 mm Diameter of application rollers: 250 mm Motor power: 3 kW Electrical: 400 V / 50 Hz / 3 phase Automatic gluing machine with 4 rollers for polyvinyl acetate (PVAC), urea-formaldehyde (UF), and polyurethane adhesives, suitable for various materials such as MDF, multi-layer boards, particle boards, composites, and gypsum plasterboard. This type of gluing machine allows for precise and homogeneous dosing of adhesive, taking into account the corrugation of the rollers, which must be suitable for the respective production requirements. The heavy-duty structure and the roller cores, manufactured with greater thickness compared to earlier models, enable a high production rate without issues and bonding of materials up to 2200 mm in width. Roller removal for maintenance is straightforward, as the supports can be split in two via a simple bayonet coupling. The gluing machine can also be equipped with different accessories, such as an electronic speed controller, automatic roller washing device, and an automatic upper roller lifting mechanism with position display on the control panel. The S4R/P gluing machine is used in various production sectors, including construction and the manufacturing of foam panels and mattresses. Equipment: - Automatic roller cleaning - Infeed roller - Outfeed roller Nksdpfx Aju I R Utefzet - Working height: 900 mm - Infeed table TRF 1400x3000 mm with PVC rollers, 60 mm diameter, 200 mm spacing - Outfeed table TDF 1400x3000 mm with disc rollers, D: 122 mm, stainless steel Location: in stock at 54634 Bitburg - Available immediately -

Condition: repair required (used), Year of construction: 1993, machine/vehicle number: 624/9, pressing force: 10 t, working height: 805 mm, total length: 1,900 mm, Cycle press for finger joints Finger joint press Pressing force 10 t Wood width 80-300 mm Wood thickness 18-80 mm Nkodpfx Afjt Sc T Iozjt OPTIONAL with hydraulic unit

Condition: repair required (used), functionality: not functional, Dimter HK 400 finger-jointing line Finger-jointing plant for timber packages Wood input lengths: 800-6000 mm Milling height: 285 mm (300 mm) Njdpfx Afovi Hw Nszokt Colour: blue Needs repair, sold as is in its current condition The plant has already been dismantled and is stored in the warehouse in Achern A lot of material for little money All technical documentation available We will also provide technical support and answer all your questions.

Year of construction: 1990, condition: good (used), I sell the door production machine MAKA, year 1990. Combined oscillating mortiser and drilling machine. Available immediately Njdpfxegiwl Dj Afzjkt

Condition: good (used), The machine has been overhauled many new parts new cables new hydraulic station Nedpfx Aov Ihdzjfzekt The machine has been checked, is functional, We can send a video.

Condition: like new (used), Technical specification: Semiautomatic finger-jointing line,including: milling unit with automatic feed, automatic gluing unit. Transporter between milling unit and hydraulic press. Nsdohmuhbjpfx Afzjkt Overall dimensions, mm - 10000х2500х1800 "Machine weight, kg - 5,500 Productivity, m³ / h - 3 Details height, mm- 22-58 Details length, mm-170-410 Year :2015

Condition: like new (used), Year of construction: 2025, Horizontal thin-cut band saw with 3 heads 300 mm working width With 3 cutting heads, to make max 4 slats in one run New 2024 model with bigger wheels and inverters on wheels. Touchscreen Schneider, PLC and Inverters Schneider Germany Nkedpfx Afsvwbg Uozjt 970mm wheels for higher cutting speed Frequency controllers on the wheels for adjustable cutting speed. For slats from 2 mm

Condition: excellent (used), Year of construction: 2008, Weinig Unimat 500 Nsdpjxdm Tvefx Afzskt Year of manufacture: 2008 Planing width: 260 mm Planing height: 120 mm Infeed table length: 2,500 mm Feed speed: 5 - 30 m/min Feed motor: 4 kW Automatic positioning of the left and top spindle Spindle positions: Bottom 7.5 kW Right ) Left ) 11 kW Top 11 kW Bottom 7.5 kW