High pallet truck pallet stacker trucks

Yale MS 15X

Condition: used, Manufacturer: Yale Type: MS15X Type: stacker truck Load capacity: 1500 kg Mast: standard Battery: Hoppecke, 24V, 375Ah Lifting height: 2768 mm Free stroke: 100 mm Fork length: 1160 mm Fork width: 570 mm Fork Thickness: 65 mm Fork carriage width: 675 mm Number of tires in front: 2 Number of rear tires: 2 Ideal for the following applications: - Horizontal transport over long distances; - Longer operating cycles and multi-shift operation; - Storage stocking in low or medium-high and high racks; -Cold store applications -30ºC. Ergonomic features: Ijdpfxjc Sdx Ej Abrjhu 5-point wheel support and fixed stabilizing wheels ensure increased stability and more safety when cornering. Without attachment and fork.

Condition: ready for operation (used), Year of construction: 2011, A Jumag steam generator including a Weishaupt burner is available. 1) Jumag DG 360 rapid steam generator, year of manufacture: 2011, volume: 60l, test pressure: 12bar, max. operating pressure: 13bar, max. temperature: 220°C, max. firing capacity: 245kW. 2) Weishaupt WM-G10/1-A Monarch burner, year of manufacture: 2011, capacity range: 65kW-310kW, connection pressure range: 15mbar/500mbar, gas type: bio. The system was in operation for only 3 years. Documentation available. An on-site inspection is possible. Ijdpfx Abjxd Au Aorehu

Condition: new, Table for hard cover making 1050×740 The device is brand new, with a 12 month warranty. European production, based on brand-name components. Work cycle: The operator manually hands the covering material to a gluing device in which the animal glue is automatically applied (working temperature 60-70’C). The covering material sheet with the glue applied, the operator places it manually on the stage, then manually adds the cardboard and joint board sheets. The operator prepares the pre-prepared cover manually to the device in which the top and bottom of the covering material are wrapped up and glued (patented brush system). During the sizing operation, the cover is pressed through the arrangement of the guide rollers. Covers leaving the device are immediately suitable for further processing The machine is equipped with: – A gluing machine applying glue to the top of the sheet Ijdpfx Aou Umbyjbrohu – table with a suction – fixing elements for covering material and cardboard – a module for wrapping the cover – receiving table Technical data: Max format: 1050x740mm Min format: 140x140mm Capacity: 100-150 covers / h Thickness of the layer: 80-170 gsm Thickness of cardboard: 1-4mm Wrap up: 13-20mm Temperature of the adhesive: 30-100 ‚C Capacity of the bender: 2-3kg Smooth speed control of rollers and brushes Types of veneer material: fabric, laminated paper, photographic paper, imitation leather, PVC, polyurethane. Dimensions of the machine: 1600x1800x1000mm Power supply: 380V Power consumption: 3.7kW Weight: 300kg We invite you to tests to our headquarters Machines are available from stock.

Condition: used, Year of construction: 2007, x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm Control Sinumerik 840 D Siemens distance between columns max. 3.000 mm passage max. 1.950 mm distance spindle center to table max. 1.800 mm distance spindle nose and table 1.350 / 1.500 mm type P 8005020/00-4 turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 20 kW max. Torque 48 Nm tool taper HSK-A63 DIN 69063 Spindle Extension 450 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° type P 8002320/00-4 turning speed range - main spindle 20 - 5.000 min/-1 power capacity - main spindel 40 kW max. Torque 1.100 Nm tool taper HSK-A100 DIN 69063 Spindle Extension 300 mm swivellable B: +110° / -10 ° rotatable C: +/- 200 ° table surface area 4.000 x 2.200 (2x) mm max. table load 12 / 20 t height over floor 700 mm number of T-slots 11 + 19 T-slot - width 28H7 mm T-slot - distance 200 mm Iedpfxsvy Ihdj Abrjhu number of toolpositions 327 pos. number of toolpositions HSK A63: 156 pos. number of toolpositions HSK A100: 171 pos. max. tool diameter HSK A63: 52 mm max. tool length HSK A63: 250 / 500 mm max. tool weight HSK A63: 5,0 kg max. tool diameter HSK A100: 315 mm max. tool length HSK A100: 500 / 800 mm max. tool weight HSK A100: 40,0 kg feed speeds X: max. 30.000 mm/min feed speeds Y/Z: max. 40.000 mm/min feed speeds B: 3.600 °/min feed speeds C: 2.160 °/min Accelaration X: max. 1,5 m/s² Accelaration Y/Z: max. 3,2 m/s² x-axis 10.100 (2x 5.000) mm y-axis 3.000 mm z-axis 1.500 mm b-axis +110° / -10 ° c-axis +/- 200 ° total power requirement 150 kVA dimensions of the machine ca. 25,0 x 12,0 x 7,0 m 5-Axis Gantry-Big-Machining-Center DROOP + REIN - TFS 22 40 DT D40 P - two Milling-Heads - ca. 4.000 Power On Hours - X-Achse 10.000mm (coupled) / 2x 5.000mm (single-table) - 3 axes simultaneously (X, Y, Z) - 2 positioning axes (B, C) - tools upon request

Condition: ready for operation (used), Year of construction: 2002, Speed: 4500rpm, max. bowl diameter: 300mm/167mm, solids: 2.6kg/dm³, material temperature min./max.: 5°C/100°C, bowl dimensions X/Y: 300mm/1200mm, machine material: stainless steel, operating hours: 62293h. Including spare parts. On-site inspection is possible. Ihsdpfx Abou Av H Dorsu

Year of construction: 2009, condition: excellent (used), machine/vehicle number: 104/1656, Size 60 x 75 cm, only for turning (without airing), with fixed control desk Ihedjhqhcijpfx Abrsu Machine nr: 104/1656

Condition: good (used), Size max 750 x 1.050 mm Stroke height 940 mm Iedpfod Hp H Isx Abrshu Lifting capacity max 600 kg

Condition: new, Bernardo horizontal bandsaw HBS 275-400 V Technical specifications Cutting capacity round 90 ° and 225 mm Cutting capacity 90 ° 200 x 200 mm square Section flat 90 ° 245 x 150 mm Cutting area around 45° 160 mm Section square 45 ° 160 x 160 mm Cutting area around 60 ° 100 mm Iedpfxod Du T Is Abrohu Cutting range, square 60 ° 100 x 100 mm Working height 910 mm Band saw blade dimensions 2480 x 27 x 0,9 mm Cutting speeds of 400 V 45 / 90 m / min Coolant pump S1 100% 100 W S1 motor power output 100% 1,1 kW Motor power S6 40% 1,5 kW Voltage 400 V Machine dimensions (L x D x H) 1430 x 720 x 1700 mm Weight approx. 190 kg Scope of delivery • Band saw blade • Workpiece stop • Base • Belt tension gauge • Vise with quick locking • Coolant system • Hydraulic lowering cylinder • Motor protection switch • Automatic shut-off

Condition: new, Year of construction: 2025, TTMC WELDING MANIPULATOR TYPE WP500 - Capacity horizontal 500 kg - Capacity vertical 250 kg - Table dimension 560 mm - Door stop 170 mm Ihedegg Rb Tspfx Abrsu - Electric tiltable - Foot pedal - Documentation - 230V CALL FOR MORE INFO DUTCHMACH Metalworking machines ENSCHEDE

Condition: used, Year of construction: 2011, functionality: fully functional, Quick steam generator set - Jumag consisting of 3 quick steam generators including water softening system and chemical dosing system 1x Jumag DG 360 Volume: 60L Operating pressure: 13 bar Max. heat output: 245 kW Steam output: 360 kg/h Iodswn H Auepfx Abrjhu Gas burner: Weishaupt WG30N/1-C-ZM-LN Year: 2011 2x Jumag DG 320 Volume: 49L Operating pressure: 13 bar Max. heat output: 200 kW Steam output: 320 kg/h Gas burner: Weishaupt WG30N/1-C Year: 2002