Industrial robot

Yaskawa MOTOMAN HP20 DX100

Condition: excellent (used), Kuka Type: KUKA KR 16 R2010 / Control Unit KR C4 / KUKA smartPAD KUKA KR 16 R2010 – Industrial Robot Technical Specifications: Payload: 16 kg Reach: 2010 mm Repeatability: ±0.05 mm Hsdpfswb Ef Ujx Ad Rjfg Axes: 6 Mounting Types: Floor, ceiling, wall, or angled mounting possible Controller: KUKA KR C4 (standard) Typical Applications: Handling & Assembly Arc Welding Machine Operation Packaging & Palletizing Pick-and-Place Tasks Special Features: Flexible for use in many industrial sectors High precision and reliability Compact design with long reach Condition: Used Scope of Delivery: (See image) (Subject to change and errors in the technical specifications, information is subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, Year of construction: 1982, spindle diameter 90 mm x-travel 900 mm y-travel 900 mm Hodpfstv H Ucjx Ad Rsfg z-axis 1200 mm w-axis 800 mm table surface area 900 x 1200 mm rotation movement 360 Grad table load 6,0 t turning speeds 25 - 1400 U/min spindle taper ISO 40 voltage 380 V / 50 Hz drive milling spindle 9,2 kW total power requirement 35 KVA weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,(3D control) • valve plate Ø 600 mm. • traverse distance: 150 mm The machine is currently not ready for demonstration due to a fault in the electrical system.

Condition: reconditioned (used), Robot welding machine with 2 m two-station turner. Offered is a robot welding machine from the company Yaskawa Motoman incl. RM2-250 turner Safety engineering Robot UP20 XRC nozzle cleaner Hfjdpod Tfb Nsfx Ad Reg etc. The system can be set up and put into operation by us. There is also the possibility of instruction and training. The plant is prepared according to customer requirements We are YASKAWA system partner and offer you the complete service for your Motoman robot and your systems.

Condition: good (used), Year of construction: 2003, operating hours: 106,864 h, clamping force: 1,300 kN, screw diameter: 35 mm, The machine was very well looked after, service and maintenance were always carried out on time. Good condition, fully functional Still in use until week 11 Further service reports and documents available Technical data: YEAR OF MANUFACTURE: 2003 Automatic operation: 106,864 h Clamping force: 1300 kN Screw diameter: 35 mm Screw stroke: 180 mm Closing force: 50 kN Opening stroke: 500 mm distance between ejector plates: 750 mm Ejector force: 40 kN Advance package - VE561/20 LGS Position-regulated screw with control valve on the injection unit for particularly high dynamics and reproducibility of the injection process, the back pressure is regulated, the nozzle contact force is manually adjustable - VE 557/00 AES Energy-saving system for automatic performance optimization and corresponding energy energy saving through infinitely variable adjustment of the pump drive speed to the respective power requirement of the spraying cycle - VE 460/00 ED Electromechanical metering drive via a speed-controlled three-phase asynchronous motor to increase productivity through simultaneous movement, through gentler material preparation and corresponding energy savings Hedpjrp Dyrsfx Ad Rsfg compared to hydraulic dosing On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Year of construction: 2000, condition: defective spare-parts repository (used), Yaskawa Motoman UP130 6-axis robot with Motoman Xrc control Robot: Motoman YR-UP130-A00 Hand controller :Yasnac Mrc Year of construction: 2000 (6th month) Robot controls: Motoman Xrc ERCS UP130-RE00 Hand control: Yasnac Mrc Year of construction: 2001 - Axis: 6 - Load capacity: 130 kg - Arm extension: 2650 mm - Repeatability: 0.2 mm - Robot weight: 1300 kg - controller Xrc - cables, plugs, plugs Structure: vertically articulated type Hfedefhkfispfx Ad Rog Axis types: S-axis 130 ° / s (2.27 rad / s) L-axis 130 ° / s (2.27 rad / s) U-axis 130 ° / s (2.27 rad / s) R axis 215 ° / s (3.75 rad / s) B-axis 180 ° / s (3, 14 rad / s) T-axis 300 ° / s (5.24 rad / s) Movement areas. S axis 180 ° L axis + 76 ° - 60 ° U axis + 240 ° - 130 ° R axis 360 ° B axis 130 ° T-axis 360 ° Purchase, Acquisition, asset management of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: good (used), Year of construction: 2018, Hook type shotblasting machine 500 kg TECNOBLAST GHIBLI 500 S/2 - 10x15 Type: Hook type Hsdpfx Adewm Atts Rjfg Max. diameter of workpiece: 1000 mm Max. height of workpiece: 1500 mm Max. workpiece weight: 500 kg Machine oppening width: mm Nr. Of turbines: 2 Turbine type: 360 Turbine wheel diameter: 360 mm Power of turbine: 7,5 kW Max. turbine flow: 105 kg/min Type of transport rail: Y Cleaner type: airwash Foundation: no Housing protection: Mn+ rubber Req. air flow: 3.000 m3/h Max. installed power: app. 19 kW Total weight of machine: 0 kg Total width of machine: mm Total height of machine: mm Total length of machine: mm !!! YEAR OF PRODUCTION 2018 !!! Machine is in very good condition. Ready for operationa !!! VERY GOOD !!!

Condition: as good as new (ex-display), Fronius TPS 3200 ✅ Scope of delivery: ➤Fronius TPS 3200 power source (320A TRANS PULS SYNERGIC) ➤Fronius FK 4000 FC cooling unit – Equipped as standard with Flow Control, Thermocontrol, and a coolant filter. The cooling unit shuts off if the water cooling fails or overheats to protect the hose assembly. These features cost approximately €400 more from Fronius. ➤Fronius VR 7000 wire feed case – Compact and practical – in our opinion, the most useful feed case – the wire is safely stored in the enclosed case. ➤Fronius long intermediate hose package – each device is delivered with a 5-meter-long connecting hose package between the power source and the wire feed case for greater flexibility and better handling. Take the wire feed case with you to places that are difficult to reach! The connecting hose assembly is neatly attached to a hook on the side of the device. (Hooks are manufactured by us.) ➤ Large Fronius trolley – Arguably the best trolley with a gas cylinder holder on the market. ➤ Binzel hose assembly – With up/down amperage adjustment on the torch. ➤ Ground cable 3-4m ➤ New Messer pressure regulator ➤ New basket spool adapter for large wire spools This device can weld almost all materials, including aluminum, steel, and stainless steel (V2A). It features feeler wire programs and is also suitable for MIG brazing (Cusi), which is frequently used in the sheet metal industry. Additional options are available for an additional charge. e.g., Fronius Job Master hose package (display on the torch) + EUR 500.00 ----- Hfodpowbilxjfx Ad Rjg IMMEDIATELY AVAILABLE PROPER INVOICE A viewing is possible in Austria in Vienna 1230! ✔ Insured shipping on a pallet is no problem! ✔ We can also be reached via WhatsApp and Viber. ✅Questions✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the devices? To explain, we buy like-new used devices, disassemble them, check everything, replace any wear parts if necessary, and only then, after a successful test weld, are they released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when we buy from you? Yes, we provide a proper invoice. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Advance payment or cash upon personal pickup ►►►Why buy from us? We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know anything about.

Condition: excellent (used), 4 units Year of manufacture: 2006/2004/2003/2002 Strap width: 5 mm, 9 mm, or 12 mm. Strap tension: Infinitely adjustable, also with gentle tension for delicate items. Maximum package size: 600 x 600 mm (width x height). Sealing system: Heat-seal welding. Table height: Approx. 820–925 mm. Minimum package height: Approx. 10 mm. Hjdpfx Adov Sq Rrs Rjfg Maximum package weight: Approx. 25 kg. Strap material: Polypropylene (PP). Power supply: 230 V.

Condition: excellent (used), Year of construction: 2011, TECHNICAL DATA Linear Axes (Slides X, Y, Z) Travel distances: Axis X: 250 mm Axis Y: 200 mm Axis Z: 300 mm Rapid traverse (X, Y, Z): 30 m/min Feed force (X, Y, Z): 3700 N Resolution (X, Y, Z): 0.0001 mm Rotary Motion of Motor Spindle – Axis B Rotary travel range: -15° to +100° Rotary travel range (with tailstock): Tailstock in position: -20° to +45° Tailstock removed: -20° to +90° Maximum speed: 20 rpm Drive torque: 750 Nm Hydraulic clamping: 50 bar Holding torque: 300 Nm Resolution: 0.0001 mm Milling Motor Spindle HSK E40 Power at 100% duty cycle: 10 kW Power at 25% duty cycle: 15 kW Nominal torque (100%): 8 Nm Nominal torque (25%): 12 Nm Speed range: 50 – 30,000 rpm Axis A (Bar capacity Ø 40 mm) Spindle type: A4 Max. bar diameter: 40 mm Max. speed: 35 rpm Drive torque (nominal): 112 Nm Drive torque (max.): 238 Nm Hodpjwv Hnmjfx Ad Rjfg Resolution: 0.0001° Axis clamping (Axis A): Pressure: 70 bar Holding torque: 130 Nm Tool Changer Number of tool discs: 2 Positions per disc: 24 Max. tool weight: 1 kg Rotational speed: 60 rpm Max. tool diameter (adjacent positions occupied): 50 mm Max. tool diameter (adjacent positions free): 63 mm Max. tool length (from spindle nose): 95 mm Coulisse de Reprise Travel distance: 80 mm Feed force: 1700 N Tilting moment: 90 Nm Resolution: 0.0001° Hydraulic pressure for tilting motion: 100 bar Workpiece Manipulator Pneumatic vertical slide gate: Ø 25 mm Stroke: 710 mm Linear travel per motor revolution: 70.4 mm/rev Max. transfer speed: 60 m/min Max. workpiece weight: 5 kg Max. manipulator stroke: 1120 mm (2×560 mm) Max. vertical travel: 150 mm Part pick-up Ø/length: Ø 32 mm / 100 mm Part ejection Ø/length: Ø 32 mm / 100 mm Accuracy: +/- 0.05 mm Grip force: 45 N (at 6 bar) Max. gripper opening: 14 mm (2×7 mm) Pneumatic Equipment Operating pressure: 6 bar Hydraulic System Operating pressure: 95 – 105 bar Coolant System Coolant tank volume: 80 liters Chip pan volume: 30 liters Kinematic viscosity in operation: 10 – 15 cSt SCOPE OF DELIVERY Includes (not limited to): Willemin Macodel W 408 B machining center Extraction unit Fire suppression system Probe Coolant system Oil chiller Data backup Complete operator documentation Exact scope of delivery as per photo gallery No guarantee is given for the correctness, completeness, or currentness of the information provided.

Year of construction: 2015, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER X-AXIS TRAVEL: 3048 mm Y-AXIS TRAVEL: 1524 mm Z-AXIS TRAVEL: 70 mm MAX ADMITTED LOAD: 750 Kg/m WORKING AREA: 3000 x 1500 mm Hjdpfsvcr Tpex Ad Rjfg SOURCE: IPG YLS-4000 ; 4000 W CONTROL UNIT: ByVISION ACCESSORIES: PORTABLE HANDWHEEL NOTE: AUTOMATIC NOZZLE CHANGER