Other

ZEISS

Condition: like new (used), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, measuring range X-axis: 1,000 mm, measuring range Y-axis: 1,200 mm, measuring range Z-axis: 600 mm, Machine description: ZEISS CNC coordinate measuring machine (CMM) in portal design - Measuring volume X = 1000 mm, Y = 1200 mm, Z = 600 mm - Table height TH = 850 mm (standard) - Prepared for tactile active sensors - VAST navigator measuring technology (tactile active scanning) ONLY 50 OPERATING HOURS – THEREFORE AS NEW EQUIPMENT ACCORDING TO ORDER CONFIRMATION – SEE ATTACHED PDF FILE Isdpfx Ajw H Rfdebgstf

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 04306, measuring range X-axis: 1,000 mm, measuring range Y-axis: 650 mm, measuring range Z-axis: 650 mm, workpiece weight (max.): 700 kg, total height: 2,734 mm, total width: 1,160 mm, total length: 1,680 mm, overall weight: 950 kg, input voltage: 230 V, ambient temperature (max.): 22 °C, ambient temperature (min.): 18 °C, Equipment: type plate available, !!!DISCOUNT!!! Motor-driven coordinate measuring machine with robust bridge design, mounted on air bearings. Included with the machine are a Renishaw 5-axis touch-trigger probing system PH20, compact touch probe TP20 with 1x SF module, Renishaw KIT 23 (stylus kit), TCR20 module changer (compatible with PH20 probe), UCCT5 interface kit for operation (joystick, cabling, servo end amplifier), UNITABLE control console, calibration sphere with holder (ceramic, diameter 25), PC table (120x80x72 cm), and Dell Optiplex 7010 (W10) with monitor and A4 inkjet printer. Itjdpfswu Uccex Abgsf

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,415 mm, measuring range Z-axis: 1,000 mm, The machine was around 6 years complete overhauled and its control technology was brought to the newest status. Technical details: Distance between portal columns: 1440mm X-travel (cross): 1200mm Y-travel (longitudinal): 2415mm Z-travel (vertical): 1000mm Feeler head: Vast Gold Regularly maintenanced through company Zeiss With housing Itodpfxoy Amfrj Abgjf

Condition: excellent (used), Year of construction: 1966, Zeiss measuring microscope type WMM 150 /75 built in 1966 it is used to measure workpieces of all kinds, especially gauges, molds, thread gauges, templates, etc right angles x+y and polar coordinates x or y Its test range is 150 x 75 mm incl. operating instructions + accessories Isdpfx Abet T Uavogetf

Condition: excellent (used), Joystickbox for Mitutoyo CMM with CMMC 1, 1S, 2; 2S; 3; 3S; 6 and UC200/400 Ijdpfxogynw Do Abgjtf

Condition: like new (used), Year of construction: 2022, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 200 mm, Equipment: type plate available, Including control panel, control PC, and software as shown in the pictures. EXW – self-collection on site. The purchasing company must sign a sales contract and disclose/confirm its beneficial owners. Furthermore, the signatory must complete a Postident identification. Iedpoyam S Sefx Abgjtf

Condition: not inspected (used), Year of construction: 1997, Attention: Sale on behalf of the seller ● Serial number: CMM970103039 ● Availability: By arrangement ● Payment terms: Advance payment – by bank transfer Isdeyyx Tpjpfx Abgstf ● Internal no.: S3 Technical data: ● Measuring range X/Y/Z: 500/550/515 mm Scope of delivery: ● Available manuals ● Available measuring accessories as shown in the pictures Dimensions & weight: ● Installation dimensions L x W x H approx.: 1500 x 1500 x 2400 mm ● Weight approx.: 1000 kg Additional notes: ► On request, we can offer transport to the place of destination ► The offer price is net, plus VAT ► Goods are sold with exclusion of any warranty ► Technical data subject to change without notice ► Subject to prior sale ❗ Sale exclusively to businesses ❗

Year of construction: 1998, condition: used, Measuring machine, coordinate measuring machine, thread measuring machine, Master Scanner -Manufacturer: IAC, measuring machine Master Scanner -Type: MSXP 60x25 -without controls Itedoqpl Srepfx Abgjf -Accessories: including calibration and measuring accessories / technical documentation, see photos -Transport dimensions: 900/400/H700 mm -Total weight: 159 kg

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 201502530269, measuring range X-axis: 700 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, table load: 560 kg, Equipment: documentation/manual, type plate available, ZEISS CONTURA G2 7/7/6 – VAST XXT TL1 Year of Manufacture: 2015 | Commissioned: 2016 | Immaculate Condition | Extremely Low Operating Hours We are offering for sale a ZEISS Contura G2 coordinate measuring machine (CMM) with a measuring range of 700 × 700 × 600 mm, equipped with a VAST XXT TL1 scanning probe head. The device comes from a controlled laboratory environment and was used exclusively on-demand, single-shift operation, never on a production line – resulting in exceptionally low actual usage and outstanding technical condition. 🔹 Basic Information Manufacturer: ZEISS Model: Contura G2 Measuring Range (X/Y/Z): 700 / 700 / 600 mm Year of Manufacture: 2015 Commissioned: 2016 Technical and Visual Condition: Perfect Measurement Error MPE (E0) = 1.7+L / 350 μm 🔹 Configuration and Accessories ✅ ZEISS VAST XXT TL1 active scanning probe head ✅ Stylus rack / magazine ✅ Set of measuring styli (mainly diameters ⌀ 0.6 mm and ⌀ 1.5 mm) ✅ Reference sphere ✅ BP26_SE control console 🔹 Usage History Device used exclusively in laboratory conditions Occasional, project-based (on-demand) use Single-shift operation, no serial or production work As a result, the machine exhibits extremely minimal mechanical wear 🔹 Service and Calibration ✅ Service and calibration exclusively by official ZEISS technicians ✅ Regular maintenance according to manufacturer guidelines ✅ No third-party interventions ✅ Device fully operational 🔹 Status 📍 Machine available immediately Isdjyzmbdopfx Abgjtf 🔍 Viewing possible 📄 Full documentation included ✅ Buyer arranges transport

Condition: used, machine/vehicle number: 7979, Table Ø: 400 mm Table with 8 T-slots: 12 mm Overall height: 175 mm Space requirement: 600 x 450 x 175 mm Weight: approx. 100 kg Itsdpfx Abjb Ez R Usgof

Condition: new, Year of construction: 2025, functionality: fully functional, Aberlink's Halo CNC coordinate measuring machine (CMM) combines high precision with affordable metrology. It features a bridge design and belt drive for the X, Y and Z axes, making it ideal for use in inspection departments and on the shop floor. With travels of X 800 mm, Y 1000 or 1600 mm and Z 600 mm, the Halo CMM offers flexibility for various measurement requirements. The solid granite plate ensures high load-bearing capacity and stability. Thanks to the user-friendly Aberlink 3D measuring software, the training time is minimal, so that precise measurements can be taken even without prior knowledge. The volumetric accuracy is (2.1 + L/250)µm with the TP20 probe, (2.0 + L/250)µm with the TP200 probe and (1.8 + L/250)µm with the SP25M scanner. Itedpjvwa T Hefx Abgef The scale resolution is 0.1µm. The Halo CMM is a cost-effective solution for precise measurements in various industrial applications.

Condition: used, functionality: unexamined, Equipment: lighting, Used ZEISS AXIO Zoom V16 microscope servo-controlled setup. Microscope inspection setup consisting of AXIO microscope and camera (Zoom V16), and ZEISS control system with servo-driven XYZ positioning and lens. Manufacturer: ZEISS | AXIO Models: AXIO Zoom V16, ICc5 camera | Zeiss EMS 3 controller, CL 9000 LED microscope lighting, SYCOP3, MA-R-C Voltage: 4x 220-230V (50/60Hz) Ijdpfx Aoyybkwebgstf Includes computer with installed software, monitor, mouse, keyboard. Frame made of aluminium and stainless steel.

Condition: ready for operation (used), Carl Zeiss Primo Vert Digital Microscope – Digital Measuring Microscope Objectives: 4x, 10x, 20x, 40x Itsdpfxsyx Dafj Abgof Dimensions: approx. 261mm x 550mm x 494mm Weight: 11 kg For technical specifications, please refer to the images. You are welcome to arrange a viewing appointment. We are happy to organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can be provided, subject to a valid VAT identification number. Subject to prior sale. Visit our shop to see more of our offers. The specified company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations in technical data and errors in the description of the article may occur and are subject to change.

Condition: used, Manufacturer: Wolpert Itsdpfxoxcu Raj Abgjf Type: 751 N

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 700 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 600 mm, This 5-axis ZEISS Contura G2 7/10/6 RDS was manufactured in 2010. It features an X-axis travel of 700 mm, Y-axis travel of 1000 mm, and Z-axis travel of 600 mm. The machine is equipped with a tilting head for versatile measurement capabilities and is air-conditioned for thermal compensation of both the machine and workpiece. If you are looking to get high-quality measurement capabilities, consider the ZEISS Contura G2 7/10/6 RDS CMM machine we have for sale. Contact us for further details. • 5-axis measurement with tilting head • Accuracy: 0.0002 mm / 300 mm • Air-conditioned machine (thermal compensation of machine and workpiece) • Calypso 6.4.28 Itjdpfoyvutkox Abgjf Additional equipment • Air-conditioned workplace