Condition: used, Year of construction: 2017, Kaser SK 25 in good condition Power 15 kW Machine designation: screw compressor Machine number: 101957.01 Functionality: fully functional operating hours: 2,317 hours power: 15 kW (20.39 hp) operating pressure: 8 bar Crjbsvb Em Heu Tk Dfjb pressure (max.): 8 bar ambient temperature (min.): 3 °C ambient temperature (max.): 45 °C load hours: 2317h running lessons: 12324h Air receiver: 790 L

Year of construction: 2014, operating hours: 39,514 h, Condition: excellent (used), machine/vehicle number: UCV1004247, Machine model: R45N-A 10 Serial number: UCV1004247 Max allowable working pressure (bar): 10 Input shaft power (kw): 45 Motor/Engine speed (rev/min): 4744 Gross mass (kg): 776 Volts: 400 Phase/Hz: 3/50 Csbuoi D D E He Tk Dferb Year of manufacture: 2014 Operating hours: 39514 The compressor is fully functional. Price is loaded on truck. Price is negotiable.

Condition: used, Year of construction: 1994, volume capacity 5,63 m³/min suction 1 bar pressure 8 bar turning speeds 3000 U/min engine output 37 kW weight of the machine ca. 660 kg Crebuetqql Rs Tk Dfeb dimensions of machine L x W x H 1,35 x 1,05 x 1,43 m

Condition: used, Year of construction: 2013, Functionality: fully functional, machine/vehicle number: AS7031917, power: 4 kW (5.44 HP), volume flow: 600 m³/h, operating pressure: 10 bar, pressure (max.): 10 bar, noise level: 93 dB, Equipment: type plate available, Portable piston compressor, lightly used, in good condition. We bought it new in 2014 and had to convert to a screw compressor. The unit has always performed its job. Cobu Tk Dswak N Asfjrb Delivery to the Berlin-Brandenburg area is possible. At no additional cost to the buyer! Demonstrations and test runs are available on-site.

Condition: excellent (used), We are selling a very little used diaphragm pump VERDE of Austrian production. We also provide a set of diaphragms and rubbers with the pump. Attached is a document with the characteristics of the pump. Cebu Tk Douputuofjrb Contact us, we are ready for an agreement

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, We offer Atlas Copco compressors TYPE GA 55 Crjbu Towa Iz Ajk Dfjb Pressure 10 bar Motor 55 kW Year 2000 Compressor with documentation We also have other compressors from Atlas Copco, Kaeser, and Mahle

Year of construction: 2004, Condition: good (used), Atlas Copco XAS 67 compressor 3.7 m3/min Number of hours: 2,371 h Deutz engine Crjbu Tk Deiywpzofeb Type: diesel

Condition: excellent (used), Year of construction: 2000, Functionality: fully functional, Kaeser SM8 compressor with TA8 dryer and 280L receiver in very good condition TÜV until 04/26 Crsbu Terua U Aek Dfjb

Condition: excellent (used), Year of construction: 2015, overall weight: 748 kg, volume flow: 4.23 m³/h, operating pressure: 10 bar, input voltage: 400 V, pressure: 10 bar, CECCATO CSC 40 screw compressor Crobowaucgju Tk Dfjb 30 kw engine Capacity 4.23 m3/min Pressure 10 bar Year of production 2015 Mileage 22000 mtg Fully functional compressor

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 2 h, machine/vehicle number: 101957.01, Exhibit available immediately: New Kaeser SK 25 - 8 bar screw compressor Controller SIGMA CONTROL 2 Pressure: 8 bar Nominal power: 15 kW Crobu Tk Dsv Ammkofsb Delivery rate: 2.52 m³ / min Sound level: 67 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 895 x 1260 mm Weight: 320 kg Operating hours: 2.0 Visit our store. We always have a large selection of new and used compressors in stock!

Condition: new, Year of construction: 2025, Functionality: fully functional, overall weight: 821 kg, total length: 2,150 mm, total width: 1,430 mm, total height: 1,410 mm, Frequency-controlled 2-stage screw compressor 37 kW Working pressure -0.8 MPa (approx. 8 bar) Delivery rate 7.72 m³/min at 0.8 MPa Crobusv Ura Ts Tk Dfob Super soundproof

Condition: like new (used), Year of construction: 2023, operating hours: 2,350 h, Functionality: fully functional, machine/vehicle number: API900148, overall weight: 1,431 kg, total length: 2,135 mm, total width: 1,221 mm, total height: 1,804 mm, power: 64 kW (87.02 HP), volume flow: 626.4 m³/h, pressure (max.): 7.5 bar, ambient temperature (min.): 4 °C, ambient temperature (max.): 46 °C, noise level: 70 dB, Equipment: type plate available, Technical data: Possible operating pressure: 7.5 bar(g) Volume flow according to ISO 1217/Annex C: 10.44 m³/min Installed drive motor power: 55 kW Total power consumption: 64.0 kW Specific power consumption: 6.13 kW/m³/min Motor efficiency: 95 % Protection/insulation class drive motor: IP55 Connection voltage: 400/3/50 V/ph/Hz Cooling air fan: 2.6 kW Cooling air volume: 9000 m³/h Ambient temperature min./max. : 4-46°C Compressed air outlet temperature, Delta T: 10 °C Noise level (ISO 2151): 70 dB(A) Compressed air connection: 2½" Residual oil content: 3 ppm Dimensions & weight: : Length: 2135 mm. Width: 1221 mm. Crebu Tkev S Ucls Dfsb Height: 1804 mm. Weight: 1123 kg Series The ALUP LARGO 55-75 series stands for industrial reliable screw compressors with direct drive and fixed speed. The high-efficiency drive guarantees energy-efficient performance. The series is modular and available in air-cooled as well as water-cooled versions, with options for, among other things, a built-in compressed air dryer, heat recovery and integrated overarching control. Fixed speed Compressors with fixed speed are often used when the compressed air consumption is fairly constant or cover a certain base load. The compressors start in star-delta and produce compressed air based on a full-load - no-load operating principle. At full load, the compressor delivers its full capacity. No-load mode anticipates the maximum permitted switching operations per hour. Heat recovery (optional) Around 80% of the heat generated when compressing air can be converted into warm or hot water using the optionally integrated heat recovery system, which can be used for process water, central heating or underfloor heating, for example. This option enables very serious energy savings! Control The smart microprocessor control Airlogic2 T has a 4.3” full-colour touchscreen with graphic display for easy operation and navigation. All essential compressor functions are constantly monitored. Adjustable timers in combination with double pressure bands ensure optimum coordination with the production process. The intelligent no-load control (IUC) reduces no-load hours to a minimum. Automatic restart after a possible power failure can be programmed. Integrated connectivity Always in contact with your compressor thanks to the integrated ICONS communication module. 100% in control thanks to push messages, reports and analysis options.

Condition: used, KAESER AS36 COMPRESSOR, DIMENSIONS: 145X80X110(H) CM, WEIGHT: 400 KG Cobusv Iflve Tk Dforb

Condition: excellent (used), Year of construction: 2000, Atlas Copco GA 1 kw compressor Year 2000 Number of hours in operation: 6 Cobuju Thw Re Tk Dfsrb Number of hours under load: 22,097

Condition: like new (used), Year of construction: 2009, operating hours: 100 h, Functionality: unexamined, overall weight: 10,250 kg, total length: 5,000 mm, total width: 2,100 mm, total height: 2,400 mm, power: 530 kW (720.60 HP), fuel type: electric, operating pressure: 3 bar, Equipment: type plate available, Make Ingersoll Rand Model: CH6-C125MX1 Year of manufacturing: 2009 Serial no: V-7667 Working hours (on service meter): Low hours!! Capacity (Kw) 530 Voltage 400 Frequency (Hz) 50 Rpm 2980 Amps (A) 920 Cebov A T Uhju Tk Dfsrb Dimensions LxWxH (mm) 5000 x 2100 x 2500 Weight (kg) approx. 10250 Total quantity in stock 1 Capacity (m3) 7.66 Nm3/h Max. pressure (Bar) 2.8 Country of origin Italy Comments Almost Unused compressor

Condition: excellent (used), Year of construction: 2016, Kaeser screw compressor with refrigeration dryer and tank - Top condition - Frequency controlled Year of construction: 2016 AIRCENTER compressed air stations (*) from KAESER offer demanding customers complete solutions in premium quality. The screw compressor with SIGMA PROFILE, an attached refrigeration dryer and a compressed air receiver ensure an uncomplicated compressed air supply for your system. Our premium compressed air stations require very little space and are perfect for smaller industrial operations. Your advantages Space-saving complete solution: This compressed air station accommodates the compressor, refrigeration dryer and compressed air storage tank in just one square meter. Protects against corrosion damage: Thanks to the built-in refrigeration dryer, the compressed air station delivers high compressed air quality and thus protects your machines from corrosion damage. Quick installation: All the station needs is a power connection and a connection to your compressed air network. Compared to a conventional compressed air station, you can save yourself a lot of piping and installation work. Model AIRCENTER 22 SFC Operating overpressure bar: 10 Total system volume flow at operating overpressure m³/min: 0.84 - 2.25 Max. overpressure bar: 11 Rated motor power KW: 11 Refrigeration dryer ABT 25 Tank volume: l 350 Dimensions: W x D x H: mm: 750 x 1,335 x 1,880 Compressed air connection: G 1 Sound pressure level: dB(A):67 Cjbu Tkotmfzqe Dfjrb Mass: kg 596 Add-on refrigeration dryer Model ABT 25 Power consumption: kW: 0.41 Pressure dew point: °C: 3 Refrigerant R-513A Global warming potential 631 Quantity of refrigerant: kg: 0.62 Mass of refrigerant as CO2 equivalent: t: 0.4 Hermetic refrigeration circuit ● Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Functionality: fully functional, overall weight: 550 kg, total length: 1,800 mm, total width: 800 mm, total height: 1,700 mm, Frequency-controlled 15 kW 4-in-1 screw compressor Crjbusv Uqlze Tk Dfsb With compressed air treatment for laser applications Attached refrigeration dryer Integrated 4-way fine filter for clean, oil-free compressed air supply Working pressure -1.6 MPa (approx. 16 bar) Delivery rate 1.3 m³/min at 1.6 MPa Integrated pressure vessel approx. 330 l

Condition: good (used), Year of construction: 2012, operating hours: 59,793 h, overall weight: 3,500 kg, ALMiG Variable 150 screw compressor The Variable series is designed in such a way that it can be operated extremely economically in any kW class thanks to its unique design concept and can therefore be used for a wide range of applications. These variable speed compressors are particularly suitable for use as alternating load compressors. Separation system - highest compressed air quality thanks to proven multi-stage separation Cjbu Tk Dettub Ujfjrb SCD motor - highly efficient drive motor, protection class IP 55, optimum efficiency of up to 96% SCD direct drive - loss-free power transmission, maximum cost savings Air End - outstanding efficiency across the entire control range Cooling unit - large-area coolers for extremely low compressed air outlet temperatures and optimum thermostat-controlled coolant temperatures Fan - powerful, efficient, high-performance ALMiG Variable 150 Year of construction 2012 Operating overpressure 5-13 bar Motor power 150 kW Volume flow in accordance with ISO 1217 (Annex C-1996): min 9.40 / max 27.25 Length 2700 mm Width 1686 mm Height 1888 mm Weight 3500 kg Operating hours 59793 h Load hours: 54679 h Downtime hours 19454 h Total delivery volume 62068260 m³ You can find more ALMiG compressors - new and used - in our store! International shipping costs on request!

Year of construction: 2006, Condition: good (used), Airpress screw compressor with dryer Bar: 10 Tank: 200 L Year: 2006 Csbu Toi Eq D Dsk Dferb

Condition: like new (used), Year of construction: 2021, operating hours: 494 h, Total operating hours: 494 h Load hours: 237 h Maintenance recently carried out The speed-controlled screw compressor NOBEL with microprocessor control microprocessor control " DNair2" already prepared as standard for SMS module (optionally available under item no. 9062744) The controller speaks plain text - all important operating statuses can be read directly. -The controller has an RS 485 interface Features: Thermal control valve Compressor block POWERSYSTEM Separate radial fan Temperature controlled for optimum cooling Very good accessibility for all maintenance work Direction of rotation monitoring by means of phase sequence relay Without dryer with galvanized cyclone separator tank as standard Technical details: Model: Powersystem NOBEL 15-10 DV Pressure bar: 10 Delivery rate L/min: 840-2100 Cobu Tsqd Uvuok Dferb Motor KW/PS: 15/20 Voltage Volt/Hz: 400/50 Noise level dB (A): 68 Weight: 250 kg The machine can be demonstrated under power on site. All data without guarantee Subject to errors and prior sale Sale EXW free loading ex warehouse Hessisch Lichtenau. Sale exclusively to traders under exclusion of any liability for material defects. Liability for damages due to injury to health, body or life and grossly negligent and/or intentional breaches of my obligations as seller remains unrestricted. This offer is aimed exclusively at entrepreneurs (commercial users) or dealers. No sale to consumers/end customers.

Condition: new, Year of construction: 2025, Functionality: fully functional, overall weight: 125 kg, total length: 1,100 mm, total width: 560 mm, total height: 1,100 mm, Frequency-controlled screw compressor 3.7 kW Working pressure -0.8 MPa (approx. 8 bar) Delivery rate 0.4 m³/min at 0.8 MPa Cobev Uqimsu Tk Dferb Integrated pressure vessel approx. 100 l

Condition: good (used), Year of construction: 2002, SCREW COMPRESSOR GA 18 + 7,5P Item is available 3x, in the following options 1x serial number: 272261 Operating hours: 1492 Price: 5035€ 1x serial number: 272265 Operating hours: 197 Price: 5875€ Crsbu Tk Dsuyg S Eofob 1x serial number: 272262 Operating hours: 1 Price: 6295€ The integration of Atlas Copco GA compressors directly into the production area ensures a reliable flow of compressed air directly to the place of use. This makes it possible to dispense with a separate compressor room or an expensive and complex piping system. GA compressors are designed to offer maximum efficiency and ensure constant and reliable production. Premium screw compressor Fully automatic, internally fully piped and wired compressor, single-stage oil-injected compression, air-cooled, sound-insulated. Aftercooler with integrated water separator and electronic condensate drain for cool and relatively dry compressed air Elektronikon II compressor control system Technical data Manufacturer: Atlas Copco Type: GA 18+ 7,5P Screw compressor Max. Operating pressure: 7.5 bar Free air output: 54.3 I/s Volume flow: 3.51m³/min Nominal shaft power kW 18.5 Shaft speed: 3000 r/min Oil-water separator: Öwamat Reference conditions Suction pressure: 1 bar Intake temperature: 20 °C Relative humidity: 0 % Usable volume flow at the outlet of the compact system according to ISO 1217-3, C at operating overpressure 7.5 bar 58.5 Is: 3.51 m³/min Nominal motor power: 18 kw Nominal motor speed: 2940 min Shaft power requirement of the motor at maximum operating overpressure: 21.1 kW Shaft power requirement at idle: 4.9 kW Compressed air temperature after the aftercooler: 25 degrees Cooling air volume: 1.15 m³ Oil filling quantity: 7.6 l Residual oil content:

Condition: good (used), Year of construction: 2011, operating hours: 10,337 h, overall weight: 3,830 kg, ALMiG Gear 132 screw compressor The screw compressors in the GEAR series are particularly suitable for very high compressed air requirements. The maintenance and service-friendly drive concept of the GEAR compressors includes a robust drive motor with strong power reserves. The highly efficient gearbox works with minimal slip, high operational reliability, is virtually loss-free with an efficiency of > 98% and is gentle on the drive. In addition, highly efficient separation of the cooling medium enables a minimum residual oil content of just 2-3 mg/m³. The encapsulated design of the gear set makes these systems ideal for use under the toughest operating conditions. Ideal for very high compressed air requirements Robust drive unit with high power reserves Virtually loss-free concept with efficiency > 98% Maintenance and service-friendly drive concept ALMiG Gear 132 Year of manufacture 2011 Final pressure 10 bar Motor power 132 kW Volume flow : 18,04 Length 2800 mm Csbu Tettv Ibek Dfsrb Width 1400 mm Height 2025 mm Weight 3830 kg Operating hours 10337 h Load hours: 9378 h Downtime hours 13887 h Total delivery volume 11333000 m³ You can find more ALMiG compressors - new and used - in our store! International shipping costs on request!

Condition: good (used), Year of construction: 2010, operating hours: 69,792 h, overall weight: 3,900 kg, ALMiG Direct 160 screw compressor The DIRECT 37 - 315 series is designed in such a way that it can be operated extremely economically in any kW class thanks to its unique design concept and can therefore be used for a wide range of applications. These fixed-speed compressors are particularly suitable for use as base load compressors. Cjbjttucceu Tk Dfsrb Separation system - highest compressed air quality thanks to proven multi-stage separation Air Control P - the intelligence of the compressor; thinks, monitors, documents. With the option of connecting to the Internet, there are virtually no limits to communication. Drive system - highly efficient, reliable direct drive Compressor - powerful, excellent efficiency Cooling unit - large-area coolers for the lowest compressed air outlet temperatures and optimum cooling liquid temperatures System fan - powerful, efficient, high-performance Drive motor - robust drive motor designed for reserve capacity ALMiG Direct 2008 Year of construction 2010 Operating overpressure 11.5 bar Motor output 160 kW Volume flow according to ISO 1217 (Annex C-1996):11.58 m3/min Length 2700 mm Width 1686 mm Height 1888 mm Weight 3900 kg Operating hours 69792 h Load hours: 57442 h Downtime hours 4015 h Total delivery volume 10773418 m³ You can find more ALMiG compressors - new and used - in our store! International shipping costs on request!

Condition: good (used), Year of construction: 2010, operating hours: 7,637 h, overall weight: 1,970 kg, ALMiG Direct 75 screw compressor The DIRECT 37 - 315 series is designed in such a way that it can be operated extremely economically in any kW class thanks to its unique design concept and can therefore be used for a wide range of applications. These fixed-speed compressors are particularly suitable for use as base load compressors. Separation system - highest compressed air quality thanks to proven multi-stage separation Air Control P - the intelligence of the compressor; thinks, monitors, documents. With the option of connecting to the Internet, there are virtually no limits to communication. Drive system - highly efficient, reliable direct drive Compressor - powerful, excellent efficiency Cooling unit - large-area coolers for the lowest compressed air outlet temperatures and optimum cooling liquid temperatures System fan - powerful, efficient, high-performance Drive motor - robust drive motor designed for reserve capacity ALMiG Direct 75 Year of construction 2010 Final pressure 11 bar Motor output 75 kW Volume flow according to ISO 1217 (Annex C-1996):11.58 m3/min Length 2300 mm Width 1400 mm Height 1860 mm Weight 1970 kg Operating hours 7637 h Load hours: 6317 h Downtime hours 167714 Total delivery volume 4506000 m³ You can find more ALMiG compressors - new and used - in our store! Crjbu Tkettucge Dfeb International shipping costs on request!