Used Accessories and spare parts for sale (28)

Condition: used, Automatic condensate separator, condensate drain KAESER Drain valve Type: Eco-Drain 13 Item no.: 8.0713.0 Year of manufacture: approx. 2015 Operating pressure: 0.8–16 bar Mains connection: 230 Volt, 50 Hz Threaded connection: Out = 1 x 1/2", IN = 2 x 1/2" Gjdpfx Afexf U Abstjuh - 3-stage LED status indicator - Test button - Compact design - Mounting bracket Weight: 3 kg Dimensions (L x W x H): 280 x 100 x 180 mm Good condition, function tested, device is working For automatic drainage of compressor, compressed air receiver, air lines, and refrigeration dryers

Condition: excellent (used), functionality: fully functional, total length: 1,950 mm, total width: 1,500 mm, total height: 1,500 mm, Selling here a heat recovery system for compressed air systems. Original Atlas Copco. WRG system for compressor. Dismantled due to insufficient compressor performance. Was hardly used :( Godpfxjp N H Hue Aftjuh Atlas Copco ER90 energy recovery unit - details attached as PDF. For water-cooled oil-free ZR compressor Turn your water-cooled, oil-free ZR compressor into an energy source for hot water with ER, our energy recovery unit. Power: 90 kw Special equipment: Reserve water pump - redundancy 2nd heat exchanger - Very good condition. Hardly ever used - poor planning! Unfortunately no documents available.

Year of construction: 2025, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture is fed to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 1500 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 380 x 600 x 625 mm Weight 31 kg Type and amount of refrigerant R134a, 400 g The price given is a NET price. The price does not include transport costs. For more information, please contact us by phone or email. We invite you to familiarize yourself with the offer on our website. Gujdpfx Aemt Dbhjftjh

Condition: new, Atlas Copco ROTO Synthetic Fluid FOODGRADE 20 liter container Also available in 5 liter containers From stock sale Gusdpfovkf A Hox Aftoh We are on vacation until 06.01.. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement.

Condition: used, Emulsion splitting plant Oil-water separation system The inexpensive and permanently reliable The solution to the problem is usually the oil/water Separation for dispersed condensates. The purified water meets the legal Sewer discharge regulations Guedsb A Iy Hopfx Afteh -Weight: 70 kg

Condition: used, Spare parts package for Compressors and cold dryer from BOGE MATTEI and BEKO. Upon request single parts can be offered. Detailed photos can be provided. Godeqapixjpfx Aftjuh

Condition: used, Filter assembly, DONALDSON ULTRAFILTER filter unit for compressor systems Double filter, stage filter Normal volume flow: 1440 m³/h = 24,000 liters/min Housing size: 0072 Tank volume: approx. 5 liters 1 unit with fine filter element (size 20/30) 1 unit with pre-filter element (size 20/30) Operating pressure: max. 16 bar Threaded connection: G 2 1/2" Flange connection: DN 100 Flange installation width: 580 mm - Differential pressure gauge - Automatic condensate drain UFM T10, 230 Volt (0.11 liters/min) - Filter housing made of aluminum Weight: approx. 35 kg Dimensions (L x W x H): 1030 x 850 x 200 mm Good condition Godpfx Afexf Uukotouh 2 units available: one each as a coarse and fine filter - suitable for use as a double filter or stage filter.

Year of construction: 2005, condition: used, content 500 Liter capacity in bar 11 bar Temperature range -10 bis + 50 °C Dimensions (LxWxH) 1,8 x 0,8 x 0,8 m weight ca. 200 kg Gusdpfev Rrrnsx Aftsh Used compressed air tank from Maschinen- und Behälterbau Mittweida GmbH. Includes a pressure gauge, 4 outlet connections, and 1 supply connection.

Year of construction: 2025, condition: new, The purpose of a compressed air refrigerant dryer is to lower the temperature of the compressed air and remove water and oil particles contained in the air flow. Refrigerant dryers are important in applications where moist air could cause corrosion, contamination or damage to tools, machinery or products. By removing moisture, the dryer increases the reliability and durability of compressed air systems. The refrigerant dryer is designed for maximum efficiency and durability. The main design elements include: 1. Air-to-air heat exchanger Gedpfx Asmt Dcfoftsuh In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the cooler air leaving the evaporator. By using countercurrent flow, heat recovery increases the energy efficiency of the entire system. 2. Refrigeration system evaporator In the second stage, the compressed air is fed to the evaporator, where it is cooled to a dew point temperature of 3°C. This results in the condensation of water vapor and oil particles contained in it. 3. Condensate separator After cooling, the gas and condensate mixture goes to an efficient separator, where the condensate is separated and automatically drained outside the device. 4. Fan control system The variable speed fan technology allows intelligent adjustment of the cooling intensity to the actual demand, which reduces energy consumption and increases the service life of the components. Technical parameters Inlet/outlet pipe diameter (BSP) 1" Maximum operating pressure 10 bar Maximum inlet air temperature ≤ 38°C Dew point temperature 3°C Efficiency 2800 l/min Power 0.58 kW Supply voltage 230 V Dimensions (L x W x H) 420 x 700 x 690 mm Weight 37 kg Type and amount of refrigerant R134a, 550 g

Condition: new, Year of construction: 2014, functionality: fully functional, Oil separator cartridge 6.2013.0 Original Kaeser spare part Suitable for Kaeser compressors: CS 75, 76, 90, 91, 120, 121 Gjdpfxevkfzce Aftsuh From stock We are on vacation until 06.01.. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement.

Condition: new, Year of construction: 2024, functionality: fully functional, Alternative and original spare parts for all types of starting air, piston and screw compressors. Godpfx Aowhb N Nsftouh Sperre, Hatlapa, Sauer Sohn, Hamworthy, Ervor, Espholin, Alkin, Atlas Copco, Ingersoll Rand, Kaeser.

Condition: new, Year of construction: 2025, functionality: fully functional, 200 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS The CORMAK 200-litre pressure tank with a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial plants, workshops, and pneumatic installations. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an indispensable component of any compressed air system. Thanks to its optimized design and high pressure resistance, the tank can serve both as a storage buffer and as a stabilizing element for compressor operation parameters. Key Features of the 200 L Pressure Vessel Professional Pressure Design – made from high-quality 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliant with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with elevated requirements. Large Capacity – 200 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 6 connection ports with diameters of ½", 1", and 2" allow flexible integration with various installations. Gsdpfx Afjxbzd Rjteuh High-Quality Craftsmanship – durable anti-corrosion coating both inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial facilities. Technical Specifications: Parameter Value Weight (kg) 80 Number of Connections 6 Connection Sizes ½", 1", 2" Dimensions 166.5 x 45 cm Tank Capacity (L) 200 Working Pressure (bar) 11 Wall Thickness (mm) 4 Diameter (mm) Ø 450 Height (mm) 1665

Condition: new, Year of construction: 2019, Air filter cartridge 6.3528.0 Original Kaeser spare part Gusdevkfxuepfx Aftoh Suitable for Kaeser compressors: - ASV 41/61, BSV 81/101, CSV 126/151, M20/27/31/50/26/30/43 From stock We are on vacation until 06.01. Your request will be processed afterwards. Warranty and return is excluded from this advertisement.

Condition: new, Year of construction: 2025, functionality: fully functional, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 500 L Pressure Vessel Professional Pressure Design – made from high-quality 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliant with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with elevated requirements. Large Capacity – 500 Litres – enables stable supply to pneumatic installations and reduces compressor start-stop frequency. Multi-connection System – 6 connection ports with diameters of 1¼", 2", and ½" allow flexible integration with various installations. High-Quality Craftsmanship – durable anti-corrosion coating both inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial facilities. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is designed for intensive use in industrial environments. The body is made from structural steel with a wall thickness of 4 mm, ensuring resistance to pressure up to 11 bar and long-lasting operation. All welds undergo strict quality control, and the tank’s surfaces are protected with an anti-corrosion coating resistant to chemical and atmospheric factors. The tank is equipped with a nameplate bearing the CE mark and the UDT notified body number, confirming its approval for use in both the Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment Connection Ports: 6 pcs – diameters 1¼", 2", ½" Gsdsxbzbpepfx Aftsuh Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Condition: new, Air filter cartridge 6.1997.0 Original Kaeser spare part Suitable for Kaeser compressors: CS 75, 90, 120 Godpjvkfyfofx Aftouh Guarantee and warranty are excluded in this advertisement. Price on request.

Condition: new, Year of construction: 2025, 270 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 270 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 270 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 5 connection ports with diameters of 1", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands chemical and atmospheric factors. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in the Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Gsdpsxbzalofx Aftjuh Standard Equipment Connection Ports: 5 pcs – diameters: 1", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Condition: new, Year of construction: 2019, functionality: fully functional, Air filter cartridge 6.3540.0 Original Kaeser spare part Suitable for Kaeser compressors: AS 47, M57, M36, M45, M64, M52, M76, M80, M81 From stock Godpfx Aevkfyreftjuh We are on vacation until 06.01.. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement.

Condition: new, Year of construction: 2025, functionality: fully functional, The pressure container is used in the pneumatic control system of various devices and is used to suppress the pulsation of compressed air in the system, securing the optimal mode of compressor work, partial removal of moisture and oil from compressed air, creating its reserve. Characteristics of the 1000l pressure tank A compressed air pressure tank is a cylindrical pressure device consisting of two ellipsoidal bottoms, a jacket with nozzles and valves. Its main function is to dampen pulsations in the compressed air system, which contributes to the optimal operation of the compressor and helps to eliminate moisture and oil from the compressed air. High-quality pressure tanks are particularly suitable for difficult working conditions. Our pressure tank with a capacity of 1000 liters and a pressure of 11 bar is a solid and capacious device, ideal for storing compressed air and other gases under high pressure. It is designed to withstand high pressure and guarantee safe storage of gas. This tank is used in various industries, such as industry, construction, automotive or home workshops. It can be easily connected to an air compressor or other devices generating compressed air, providing a reliable source of gas in production processes and utility applications. With a capacity of 1000 liters, this tank allows for longer periods of operation without the need for frequent refilling. The pressure of 11 bar means that the tank is able to store gas at high pressure, which is extremely useful in applications requiring higher power. Our 11 bar 1000 L pressure tank is solidly made of high-quality materials, which guarantees its durability and safety. It also has appropriate valves and safeguards that prevent leaks and maintain a safe pressure level. What's more, our tank is supplied with complete documentation, passports, certificates and approvals, including information on the materials used in the production process. It has also passed the inspection by the Notified Body of the Office of Technical Inspection. It is marked with a nameplate with the CE symbol and the number of the Notified Body UDT. To sum up, the pressure tank with a capacity of 1000 liters and a pressure of 11 bar is a reliable device that allows the storage of compressed air or other gases at high pressure. Its versatile use makes it a permanent source of gas for various industrial or utility applications. Our offer includes a wide selection of pressure tanks of various capacities, which makes it easy to adapt the model to the specific needs of the installation in a given plant. Our tanks are made of durable steel with increased pressure resistance and covered with a properly prepared paint on both the inside and outside. Models are available for both vertical and horizontal installation, which allows for flexible adjustment to a specific situation. Our tanks are also used in pneumatic control systems for various devices. Technical data: Weight (kg) 230.00 Connections 8 Connection size 1/2", 2" Size 222.7 x 85 cm Tank capacity (l) 1000 Working pressure (bar) 11 Wall thickness (mm) 5 Diameter (mm) Ø 850 Height (mm) 2250 Godpfxsv Axzms Aftouh Manufacturer: Cormak

Condition: new, Year of construction: 2021, functionality: fully functional, Oil separator cartridge 6.3789.0 Original Kaeser spare part Gusdpfx Afevkfxhetoh Replacement separator cartridge for the oil separator tank From stock sale We are on vacation until 06.01.. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement.

Condition: new, Year of construction: 2025, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Features of the 500 L Pressure Vessel Professional Pressure Design – made of high-grade 4 mm thick steel, resistant to pressure and corrosion. UDT Certification and CE Marking – compliance with European safety and quality standards. Working Pressure of 11 bar – suitable for most pneumatic systems, including those with higher demands. Large Capacity – 500 Litres – ensures stable air supply and reduces compressor start-stop frequency. Multi-connection System – 6 connection ports with diameters of 1.1/4", 2", and 1/2" allow flexible integration with various installations. High-Quality Finish – durable anti-corrosion coating inside and outside the tank. Universal Mounting Position – vertical design saves space in industrial environments. Construction and Technology – Robust Design for Demanding Applications This compressed air tank is engineered for heavy-duty use in industrial settings. The body is made from 4 mm thick structural steel, ensuring resistance to pressures up to 11 bar and enabling long-term operation. All welds undergo strict quality control, and the tank surfaces are protected with a corrosion-resistant coating that withstands both chemical and atmospheric conditions. The tank includes a nameplate with the CE mark and the notified body number of UDT, confirming its approval for use in both Polish and European markets. The set comes with complete technical documentation, a pressure vessel passport, and material certificates. Precision and Efficiency – Stable Pressure and Optimized Compressor Operation Thanks to its large 500-litre capacity, the tank acts as an air buffer, stabilizing pressure throughout the pneumatic system. This ensures consistent operation of air-powered devices and significantly extends compressor lifespan by reducing the number of start-stop cycles. The vertical design allows for space-efficient installation, which is especially important in facilities with limited room. A properly matched tank helps minimize pressure drops and prevents pneumatic system overloads, resulting in greater efficiency and enhanced safety across the entire installation. Standard Equipment Gjdsxby D Aspfx Aftjuh Connection Ports: 6 pcs – diameters: 1.1/4", 2", 1/2" Nameplate with CE Mark UDT Notified Body Number Complete Technical Documentation and Pressure Vessel Passport Internal and External Anti-Corrosion Coating

Condition: new, functionality: fully functional, Kaeser Omega Fluid M-220 1L container From stock sale Gedpfovkf Aysx Aftouh We are on vacation until 06.01. Your request will be processed afterwards. Warranty and return is excluded from this advertisement.

Condition: new, Year of construction: 2020, functionality: fully functional, Control line kit cpl. incl. screw connection 403574.0 Original Kaeser spare part From stock Gedpfx Afevkfw Rjteuh We are on vacation until 06.01. Your request will be processed afterwards. Warranty and return is excluded from this advertisement.

Condition: new, Year of construction: 2021, functionality: fully functional, Oil separator cartridge 6.3789.0 Original Kaeser spare part Suitable for Kaeser compressors: ASK 27/32/35/ Guodpfsvkfzpox Afteh From stock We are on vacation until 06.01. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement.

Condition: new, Year of construction: 2010, functionality: fully functional, Oil separator cartridge 6.2010.0 Original Kaeser spare part From stock sale We are on vacation until 06.01. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement. Gsdpfevkfziex Aftjuh

Condition: new, Year of construction: 2018, functionality: fully functional, Air filter cartridge 6.4566.0 Original Kaeser spare part Suitable for Kaeser compressors: M50, M36, M43, M45, M64, M52 From stock We are on vacation until 06.01.. Your request will be processed afterwards. Warranty and returns are excluded from this advertisement. Guedovkfyxopfx Afteh