H.Heinen

Condition: ready for operation (used), Year of construction: 2004, operating hours: 43,466 h, functionality: fully functional, pressing force: 145 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,080 mm, bale height: 1,100 mm, bale weight: 1,250 kg, overall weight: 42,000 kg, oil tank capacity: 3,100 l, Technical data baler: Manufacturer Paal GmbH Typ Konti 600 E Year of construction 2004 Operating hours 43,466 hours, as of October 2025 Press power main press 145 tons Specific press force 11,8 kg/cm² Feed channel 2,000 x 1.020 mm (l x w) Filling volume 3.45 m³ Throughput capacity when idle 900 m³/h Throughput capacity under operating conditions 540 m³/hour Bale size 1,080 x 1,100 mm, length variable Drive power 3 x 45 kW Connected load 180 kW Rated current 330 A Main fuse min. 400 A, max. 500 A Tying system 4-fold vertical, fully automatic Bale weight up to 1250 kg, depends on material Throughput capacity at a bulk density of: 35 kg/m³ approx. 15 t/h 60 kg/m³ approx. 25 t/h 100 kg/m³ approx. 39 t/h Volume hydraulic oil tank 3,100 l, type HPL VG 68 SPS controller Siemens Simatic S7-300 Operating panel Siemens Multi Panel Transport dimensions only baler 14,365 x 2,60 x 3,640 mm (l x w x h) Machine weight baler approx. 42 tons Pgodpoxru Nbefx Adyou Condition of the baler: The press is currently still in operation and is scheduled to be replaced by a new press in the first quarter of 2026. It is in satisfactory condition and ready for operation. However, the press should be serviced and partially overhauled before being put back into service. Scope of delivery: Only the baling press is for sale, without conveyor belt, wire pulling stations and bale chute. Comments: The documentation (Manual, CE, electr./hydr.-drawings), are completely available. Dismantling and loading is the responsibility of the buyer. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: excellent (used), Year of construction: 2017, operating hours: 19,187 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, overall weight: 52,000 kg, Technical data baler: Manufacturer Bollegraaf Recycling Machinery B.V. Typ HBC 140 Year of construction 2017 Working hours 19,187 hours, stand October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm Capacity per cycle time 4,34 m³ Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm Driving motor 2 x 75 kW Psdpfoxrta Esx Adysgu Connected load 226 kW Full load current 428 A Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 800 up to 1300 kg, depends on material and bale lenght SPS controller (manuf., type) Telemecanique TSX Micro Operating panel (manuf., type) Schneider MAGELIS Touch Baler dimensions built up with hopper 13,200 x 27,000 x 7,344 mm (l x w x h) Transport dimensions only baler 13.200 x 2.750 x 3.450 mm (l x w x h) Machine weight baler approx. 52 tons Technical data chain belt conveyor: Manufacturer Bollegraaf Typ HBT 1216 Year of construction 2009 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Weight 16 t Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Comments: The press is currently in operation and is to be replaced by a new machine in the 2nd quarter of 2026. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Year of construction: 1992, Roller compactor, packing station, garbage compactor, garbage press, press container, garbage container, self-compactor, waste compactor, paper compactor, paper container, cabinet press, vertical baler, cardboard reducer, paper baler, rotating waste compactor -Manufacturer: Bergmann, paper baling press -Type: PS 8100-38 -Waste compactor: with rotating compaction unit -Advantage: It can be filled continuously Podsxrpi Aepfx Adyjgu -Drive power: 2.02 kW -Filling opening: 1190/990/H670 mm -Bale volume: 1 m³ -Transport dimensions: 1600/1200/H2200 mm -Weight: 898 kg

Condition: excellent (used), Year of construction: 2018, pressing force: 80 t, bale weight: 600 kg, DIXI 80 SLS horizontal press Semi-automatic press system with 80 tons of pressure for economical volume reduction of residual materials (recyclable) in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulating mats and other compressible materials. Pressure force : 80 t Electrical connection : 400 V 50 Hz; 11 kW; D-32 A (option: K-32 A) Cycle – average approx. : 35 sec Length approx. : 4,320 mm (without lifting device and pallet) Width approx. : 1,830 mm Height approx. : 2,620 mm (with hopper) Podpfx Aexrbiujdyjgu Loading opening (WxD) – housing : 1,040 x 1,110 mm Bale dimensions : 1,120 x 1,120 x 1,200 mm Bale weight approx. : 500 – 600 kg Tying 4 manual, wires with quick-release eyelets Machine weight approx. 8,000 kg (without bale)

Condition: used, Year of construction: 2014, operating hours: 7,145 h, functionality: unexamined, Just arrived: Presto HPK 50 HS baler, year of manufacture 2014 Manufacturer: Presto Model: HPK 50 HS Year of manufacture: 2014 Drive: 30 kW Pressing force: 50 t Operating hours: 7,145 Fill opening: 1600 x 650 mm (LxW) Channel cross-section: 700 x 950 mm Maximum filling volume: 1.06 m³ Cycle time: 20 s Tying: 4-fold Throughput rate at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8420 x 1900 x 2400 mm (LxWxH) Machine weight: approx. 10,500 kg Materials: Paper, cardboard, film, PET bottles Note: The baler has just arrived in our warehouse. Additional photos will follow. Pgjdpfx Asxqyc Redyou Please note: All technical data are based on manufacturer specifications. We do not accept liability for the information provided or any possible errors. This offer is subject to change, prior sale reserved, and can be revoked at any time. Inspections can be arranged upon request. Sale is ex works, payment in advance, without warranty or guarantee.

Condition: good (used), Year of construction: 2016, operating hours: 1,030 h, functionality: fully functional, Baler Dixi 80 SLD, with lifting/tipping device, semi-automatic, year of manufacture 2016 Manufacturer: Dixi Model: Dixi 80 SLD Year of manufacture: 2016 Operating hours: 1030 Drive power: 11 kW, 400 V / 32 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1,000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Binding: 3-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, cartons Operating manual is available. Note: The baler is in very good condition. It has been inspected and tested at our location in 28816 Stuhr. The video can be found on our website or YouTube channel. The hydraulic hoses should be replaced. Inspections, including powered demonstrations, are possible at any time by arrangement. Upon request, we will also conduct tests with your material for a nominal fee. We are happy to answer any questions about the machine by phone from Monday to Thursday between 08:00 and 14:00. On Fridays, we are available from 08:00 to 13:00. Pgjdpfx Ajxqxursdyju Please note: All technical data is based on manufacturer’s specifications. We do not assume liability for the information provided or any possible errors. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by appointment. Sale is ex works, prepayment required, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, Baler Austropressen AP 25, semi-automatic, with bin lift-tippler for MGB, year of manufacture 2020 Technical specifications: Manufacturer: Austropressen Model: AP 25 Year of manufacture: 2020 Pressing force: 25 t Cycle time: 35 s Drive power: 7.5 kW Filling opening: 1500 x 940 mm Tying: 3-fold, manual Bale dimensions: 1000 x 750 x 1200 mm Bale weight: 200–300 kg Machine weight: approx. 3,400 kg Materials: Paper, cardboard, film, metals, foams, etc. Pgjdpfx Adsxqxtujyeu Note: The baler is in very good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. Full documentation is included. Viewing, including under power, can be arranged by appointment. On request, we can also test your material for a compensation fee. We are happy to answer any questions about the machine by phone Monday to Thursday from 8 am to 2 pm and Friday from 8 am to 1 pm. Please note: All technical data is based on the manufacturer's specifications. We assume no liability for the information provided or any possible errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Viewings are possible by arrangement. Sale is ex-works, against prepayment, without warranty or guarantee.

Condition: good (used), Year of construction: 2005, operating hours: 16,304 h, Baler HSM VK 4012, Year of Manufacture 2005 Manufacturer: HSM Model: VK 4012 Year of manufacture: 2005 Operating hours: 16,304 Pressing force: 45 t Drive power: 15 kW Filling opening: 820 x 1250 mm (W x L) Capacity at 50 kg/m³: 8.7 t/h Bale size: 900 x 720 x 600-1200 mm Bale weight: 250-400 kg Tying: 3-fold, automatic Transport dimensions: approx. 7,200 x 2,300 x 2,400 mm (L x W x H) Weight: approx. 8,000 kg Pgsdpsxqxthsfx Adysu Materials: Paper, Cardboard, Film Remarks: The press is in good condition. Documentation is available. Please note: All technical data are based on manufacturer information. We assume no liability for any errors or inaccuracies in the details provided. This offer is subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible by appointment. Sale is ex works, prepayment required, with no warranty or guarantee.

Condition: good (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 350 kg, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Press force: 400 kN Transport width: 1,767 m Transport height: 2,489 m Pgjdpfx Aexqmb Tjdyju Transport length: 5,573 m Weight: 4,500 kg Drive power: 7.5 kW Bale weight (depending on material): 300-350 kg

Condition: excellent (used), Year of construction: 2018, pressing force: 70 t, bale weight: 600 kg, HSM HL 7009 Re/Li Horizontalballenpresse. Die Maschine befindet sich in sehr gutem Zustand und wird regelmäßig von einem autorisierten Servicecenter gewartet. Diese Ballenpresse ist für größere Entsorgungsprojekte im Einzelhandel sowie in kleinen und mittleren Zentrallagern konzipiert. Die Ballen des Modells HL 7009 haben einen Querschnitt von 1100 x 1100 mm und können bei einer Ballenlänge von 1200 mm bis zu 600 kg wiegen. Dies gewährleistet eine optimale Ausnutzung der Nutzlast des LKWs. Presskraft: 700 kN Spezifische Presskraft: 58 N/cm² Podpfx Adsxql N Asyjgu Antriebsleistung: 10,5 kW Spannung / Frequenz: 400 V / 50 Hz Leerlaufleistung (theor.): 42,97 m³/h Einfüllöffnung Breite x Länge: 890 x 1020 mm Ballen Breite x Höhe x Länge: 1100 x 1100 x 1200 mm Gesamtlänge x Breite x Höhe: 5366 x 2525 x 2559 mm Ballengewicht: 600 kg

Condition: excellent (used), Year of construction: 2017, operating hours: 13,284 h, functionality: fully functional, pressing force: 140 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,500 kg, oil tank capacity: 2,600 l, Technical data baler: Manufacturer Bollegraaf Type HBC 140 Year of construction 2017 Working hours 13,284, as of October 2025 Press power main press 140 tons (max. 153,5 tons) Press power of pre-press 70 tons Feed channel 1,600 x 1,100 mm (l x w) Capacity per cycle time 4,34 cbm Theoretic cycle time 16 sec. Bale size 1,100 x 1,100 mm (w x h), length adjustable Driving motor 2 x 75 kW Connected load 209 kW Tying system 5-fold vertical, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx. 30 tons/h bulk weight of 50 kg/cbm approx. 46 tons/h bulk weight of 100 kg/cbm approx. 82 tons/h Bale weight 850 up to 1.500 kg Hydraulicoil 2.600 l Univis N46 Baler dimensions with conveyor built up with hopper approx.13,200 x 24,200 x 7,333 mm (l x w x h) Transport dimensions only baler approx.13,200 x 2,884 x 3,539 mm (l x w x h) Machine weight baler approx. 51,810 tons Technical data feeding and elevating conveyor with gooseneck: Manufacturer Bollegraaf Typ HBT 1216/1800 * 23,300 30°/15° Year of construction 2017 Driving motor 7,5 kW Length feeding conveyor 6,750 mm Length elevating conveyor 14,400 mm Length goose neck 2,150 mm Pgjdpfexpxhvjx Adysu Grade 30° Effecting width 1,754 mm Height of side wall feeding conv. 500 mm Height of side wall elevating conv. 800 mm Transport dimensions feeding conveyor with one segment elevating part 9,816 x 2,500 x 2,242 mm (l x w x h) Transport dimensions elevating conveyor with goose neck 13,472 x 2,800 (without motor) x 2,729 mm (l x w x h) Pit dimensions 10,000 x 3,200 x 1,200 mm (l x w x d) Condition: The press is in very good condition and ready for immediate operation. The conveyor belt chain needs replacing. The system will be in operation until December 2025. Scope of delivery: baler with conveyor belt, maintenance platform, access ladder, two wire feed stations for 5 wire reels each (without wire), and bale slider. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: ready for operation (used), Year of construction: 1996, operating hours: 42,000 h, functionality: fully functional, machine/vehicle number: LP100DH4, Type: LP 100 DH4 Year of manufacture: 1996 Pressing force: 100 t/1000 kN Electric motor power: 2x55 kW Capacity: 960 m³/hour Capacity at density 30 kg/m³: 13-17 t/h 50 kg/m³: 17-21 t/h 100 kg/m³: 21-32 t/h TBO 22-33 t/h Loading hopper: 2050 x 1100 mm Press chamber volume 3.7 m³ Bale weight: up to 500-725 kg Bale height: 750 mm Bale width: 1100 mm Bale length: adjustable Number of vertical strapping rows: 5 Oil tank capacity: approx. 2000 liters. Maximum oil pressure: 250 bar Machine weight: approx. 35 tons Digital display for fault indication: 100 mm Loading hopper Guide device for bales from the chute to the floor Fully automatic strapping device with 5 rows of strapping wire Wire guides for feeding from 10 coils weighing 500 kg. Cartridge hydraulic system assembly Control system for 2 conveyors Press control system with PLC controller Photocells for two-level filling of the press chamber Time counter Bale counter Bale length measurement counter Technical documentation Podpfx Adoxn T S Toysgu

Condition: good (used), Year of construction: 2016, functionality: fully functional, Vertical baler HSM V-Press 1160 plus, year of manufacture 2016 Technical data: Manufacturer: HSM Model: V-Press 1160 plus Stock no.: 9960 Year of manufacture: 2016 Pressing force: 55 t Drive power: 4 kW Cycle time (idle): 25 s Filling height: 1115 mm Filling opening: 1195 x 650 mm Bale size: 1200 x 1100 x max. 1200 mm Bale weight: 550 kg Dimensions (WxDxH): 1700 x 1800 x 2200 mm Weight: 2430 kg Materials: Paper, Cardboard, Film Operating manual is available. Pgedpfxsxn Ilzo Adysu Please note: All technical data is based on information provided by the manufacturer. We assume no liability for the given specifications or any possible errors. Offers are subject to change, prior sale reserved, and can be revoked at any time. Inspections are possible by prior arrangement. Sale is ex-works, without warranty or guarantee. Our payment terms are 100% advance payment.

Condition: ready for operation (used), functionality: fully functional, Brand: HSM Model: VK 20/1200 Motor: 11 kW Final bale size: 700 x 800 mm Bale weight: 200–350 kg Pgsdpfoxnzf Ijx Adysu

Condition: ready for operation (used), Year of construction: 2009, Brand: HSM Model: V-Press 1160 plus Year of manufacture: 2009 Pressing force: 532 kN Voltage: 400 V Maximum bale weight: up to 550 kg (depending on material) Bale dimensions: 120 x 110 x 120 cm Machine weight: 2403 kg Machine dimensions: 180 x 157 x 298.5 cm Filling opening dimensions: 19.5 x 65 x 111.5 cm Condition: Very good! Checked for proper operation. FLITS Rental & Sales service: every machine comes with a bundle of binding wire (120 wires). Need more binding wire bundles? Request a free quote. Pjdpfx Adsxnxnteyegu At FLITS Rental & Sales you choose speed, clarity, and reliability. We think along with you, respond promptly, and ensure you quickly have access to the right machine. You are welcome to inspect the machines at our location: Schoterlandseweg 94, 8413NE Oudehorne. Visits are possible by appointment, so we can take the time to properly inform you and show you the right machines. We are happy to assist you! Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste Waste processing

Condition: ready for operation (used), Year of construction: 2009, Brand: HSM Model: V-press 860 plus Year of manufacture: 2009 Pressing force: 418 kN Voltage: 400 V Max. bale weight: 430 kg (depending on material) Bale dimensions: 120 x 110 x 85 cm Psdpexnxmvofx Adyogu Machine weight: 2083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Fill opening dimensions: 120 cm x 65 cm x 85 cm Condition: Very good! Checked for proper operation. FLITS Rental & Sales service: with every machine we supply a bundle of binding wire (120 wires).

Condition: good (used), Year of construction: 2006, Garbage compactor, garbage press, press container, garbage container, self-compacting compactor, waste press, paper press container, paper container, cabinet press, vertical baler -Manufacturer: Bramidan, cabinet press vertical baler Pjdpfjxnb Nysx Adyogu -Type: 4-0 S50 KBP PES243768-2 -Drive power: 5.5 kW -Pressure: 50 t -Filling opening: W x H 1350 x 760 mm -Bale ejection device: bale dimensions 1200x800x1100 mm -Transport dimensions: 1400/2040/H2880 mm (press can be laid down for transport) -Weight: 2750 kg

Condition: used, Year of construction: 2018, operating hours: 40,350 h, Baling Press Presona LP 85 VH2 with Cross Tying, Year of Manufacture 2018 Technical Specifications: Manufacturer: Presona Sweden Model: LP 85 VH2 Year: 2018 Drive Power: 2 x 45 kW Operating Hours: 40,350 Effective Operating Hours: Approx. 22,000 Pre-press Force: 28 t Main Press Force: 85 t Feed Opening: 1500 x 1100 mm Bale Dimensions: 750 x 1100 mm Bale Weight: 450–650 kg Pgodsxm Shqopfx Adyeu Theoretical Throughput Volume: 1,200 m³/h Throughput Capacity at 30–100 kg/m³: 13–30 t/h Tying: 5-fold vertical, 3-fold horizontal Oil Tank Capacity: 2,000 L Press Transport Dimensions: 10,400 x 2,400 x 2,800 mm (LxWxH) Weight: Approx. 27,000 kg The press was removed from ongoing operation. A spare parts package is included in the scope of delivery. Technical documentation is available. Please note: All technical data refer to the manufacturer’s information. We do not assume liability for the specifications provided or for any errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Viewings are possible by appointment. Sale only by advance payment, ex works, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, pressing force: 26 t, filling opening width: 1,500 mm, filling opening length: 630 mm, bale length: 1,500 mm, bale width: 800 mm, bale height: 1,140 mm, bale weight: 500 kg, total width: 1,060 mm, total height: 2,576 mm, total length: 2,075 mm, overall weight: 1,220 kg, noise level: 65 dB, power: 4.6 kW (6.25 HP), Powerful bale press Orwak 3820 Power. Pgsdpoxmvc Eofx Adyeu Extra good machine for big dimensions cardboard or foil because of the extra large feed opening 1500 x 630 mm.

Condition: excellent (used), Year of construction: 2002, operating hours: 66,568 h, functionality: fully functional, pressing force: 71 t, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, oil tank capacity: 800 l, power: 45 kW (61.18 HP), operating pressure: 280 bar, Technical data baler: Manufacturer BOA Type 2040.S. 4V (6) 71.30 Year of manufacture 2002 Operating hours approx. 66,568 hours, as of October 2025 Effective pump running time 13,614 hours, as of October 2025 Number of bales pressed 139,167, as of October 2025 Pressing force main press 71 t Specific pressing pressure 9.0 kg/cm² Operating pressure 280 bar Dimensions of feed chute 1,620 x 1,080 mm Bale dimensions 1,100 x 1,100 mm, length variably adjustable 800 up to 1,600 mm Drive power 45 kW Tying system 4-fold vertical, fully automatic Throughput rates for quality: Bulk density 20–30 kg/m³, throughput capacity up to 9 tonnes/hour Bulk density 40–60 kg/m³, throughput capacity up to 16 t/hour Bulk density 80–100 kg/m³, throughput capacity up to 21 t/hour Bulk density 100–150 kg/m³, throughput capacity up to 28 t/hour Pgedexmk Ivopfx Adysu Bale weight up to 600 kg/bale, depending on material Hydraulic oil tank capacity 800 l Transport dimensions 10,020 x 2,060 x 3,250 mm (l x w x h) Machine weight press approx. 26 t Noise level <90 dB (A) Technical data for the chain belt conveyor: Manufacturer BOA Type 1500 HS 29° KTH 3000 *13625 * 1500 Year of manufacture 2002 Drive power 7.5 kW Length of feed belt 2,600 mm Length of incline belt 13,625 mm Length of gooseneck 1,500 mm Incline 29° Useful width 1,425 mm Overall height of conveyor belt 7,065 mm Height of side wall of feed belt, inside 500 mm Height of side wall of ascending belt, inside 800 mm Pit dimensions for conveyor belt 5,500 x 2,800 x 800 mm (l x w x d) Technical data for PET bottle flattener: Manufacturer BOREMA Type L 1600 Year of manufacture 2002 Suitable for returnable bottles with a capacity of 0.33 to approx. 2 litres Throughput approx. 50,000 PET bottles/hour Dimensions of feed opening 700 x 530 mm Drive motor power 11.5 kW Adjustment motor power 0.55 kW Pressure vessel 6–10 bar Working pressure 3.5 bar Connected load 27.7 kVA Main fuse 3 x 40 AT Scope of delivery: 1 piece used baler BOA 2040.S. 4V (6) 71.30 10 pieces wire reel stands, without wire 6 pieces wire deflection stations 1 piece bale slider 1 piece chain belt conveyor BOA 1500 HS 29° KTH 3000 *13625 * 1500 1 piece BOREMA PET bottles flattener type L 1600 1 piece of BOREMA PSS ibor 12 non-contact personal protection system 1 piece of machine documentation The machines were used in a PET recycling plant for compressing sorted PET bottles. As part of the production plant, the machines were regularly maintained and are in good condition, ready for immediate use. Comments: The documentation (operating instructions, CE declaration, electrical and hydraulic circuit diagrams) for the press is available. An inspection is possible by arrangement. We do not accept any liability for the technical specifications or any errors.

Condition: excellent (used), Year of construction: 1994, pressing force: 12 t, bale length: 1,200 mm, bale width: 700 mm, bale height: 500 mm, bale weight: 450 kg, total length: 5,500 mm, The HSM AK 1200 automatic horizontal baler is equipped with an automatic binding system. The machine is in very good condition and regularly serviced. Manufactured in 1994, it was purchased from the original owner and is ready for use. The baler is started manually by a button or fully automatically using a photocell in the loading chute. Cutting blades mounted on the pressure plate cut the material and compress it in the baling channel. Once the desired length is reached (bale length adjustment is available), the bale is automatically tied after several baling cycles. The bale can be tied with wire, twine, or polypropylene tape. Automatic baling system with a 12-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Baling pressure: 120 kN Bale size: 700 x 500 x 600 - 1200 mm Bale weight (depending on material): 280-450 kg Transport length: 5.5 m Weight: 3500 kg Drive power: 7.5 kW Pgjdpexmgm Uefx Adyeu Transport costs depend on weight, volume, and, above all, distance. The following information is important for inquiries: Delivery address (postal code and city name), but further details require a phone call. Therefore, please inquire about transport costs and other delivery methods by calling us.

Condition: excellent (used), functionality: fully functional, Safe Waste Compactor Hydraulic waste compactor that compresses directly into the waste storage container, easily adaptable for standard 1100, 660 (or 770*) litre, 4-wheeled, lidded – most often green – bins (Sulo, Otto, Schäfer, etc.). For bagged and bulk waste Compression ratio is between 1:4 and 1:8 depending on the waste composition, saving approximately 75% in waste transportation costs. Safe design Pgsdpfx Aexmbg Nodyou ORWAK bin compactors are robust and can be operated safely. During compaction, it is not possible to reach inside the machine, ensuring operator safety. Both external and internal surfaces are easily accessible for quick and simple cleaning. The waste compactor can be used with all types of standard 1100, 660 (or 770*) litre plastic waste bins, whether with flat or semicircular lids! We can assist with transportation.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 20212531, The HiTec Steam Cooker, are versatile, custom-built cookers are designed to Steamcook & pasteurize, a wide range of production needs such as gyoza, dumplins etc. Engineered with food safety,EHEDGE, efficiency, and footprint in mind. Year of construction 2021 and not used much since that! Pjdpfxsxl Tnpe Adysgu

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, pressing force: 71 t, filling opening width: 1,080 mm, filling opening length: 1,620 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 600 kg, total width: 3,450 mm, total height: 4,090 mm, total length: 10,020 mm, input voltage: 400 V, overall weight: 27,000 kg, noise level: 85 dB, pressure: 300 bar, transport height: 2,300 mm, power: 37 kW (50.31 HP), Fully automatic channel baler with pre-press flap available immediately. The machine includes a conveyor belt with a floor-mounted section. The baler is supplied in refurbished condition and the conveyor belt underwent a belt overhaul at the beginning of this year. The machine was taken out of production at the beginning of October and is currently stored in our facility. It can be demonstrated in operation at our location. This machine is particularly suitable for baling paper/cardboard and various types of plastics such as PET, HDPE, and big bags. Psdpfx Adexl Rqbeyjgu Technical specifications baler: Drive: 37 kW Press force: 71 tons Bale dimensions: 1100 x 720 x 1300 mm (length adjustable) Number of wires: 4 vertical Filling hopper dimensions: 1620 x 1080 mm Bale weight: up to 600 kg (depending on material) Capacity: up to 20 tons per hour (depending on material) Transport weight: 27,000 kg Technical specifications conveyor belt: Length of horizontal section: 3,000 mm Length of inclined section: 7,424 mm Angle: 29° Filling option: at floor level

Condition: ready for operation (used), Year of construction: 2012, Brand: DIXI Model: 60 S Year of manufacture: 2012 Pressing force: 60 tons Voltage: 400 V Maximum bale weight: 340-500 kg Bale dimensions: approx. 120 x 80 x 80-110 cm Machine weight: 2,400 kg Machine dimensions: 190 cm wide x 140 cm deep x 230 cm high Filling opening dimensions: 115 cm wide x 80 cm deep x 55 cm high Condition: Very good! Fully inspected and tested. FLITS Rental & Sales service: Each machine is supplied with one bundle of baling wire (120 wires). Need additional bundles? Please request a non-binding quotation. FLITS Rental & Sales is your reliable partner for the sale and rental of high-quality machines for both businesses and private individuals. We specialize in providing efficient solutions for internal transport, cleaning, waste processing, and working at height. At FLITS Rental & Sales, you will find an extensive range of machines suitable for various sectors. Also see our listings for: balers for efficient waste processing, electric pallet trucks/stackers for quick and safe internal transport, scrubber dryers for thorough and professional floor cleaning, forklifts in various models, suitable for a wide range of working environments. When you choose FLITS Rental & Sales, you choose speed, clarity, and reliability. We work with you, respond quickly, and ensure you have the right machine in no time. Visit our location You are most welcome to view the machines at our premises. We are located at: Psdpoxlgx Uefx Adyogu Schoterlandseweg 94, 8413NE Oudehorne. Visits are by appointment, so we can take the time to provide you with comprehensive information and show you the right machines. Contact Do you have any questions or would you like to receive a non-binding quote? Please feel free to contact us: We are happy to assist you. Waste baler Paper baler Cardboard baler Plastic baler Waste compactor Recycling Textile baler Waste processing DIXI