Used Machine and parts cleaning equipment for sale (132)

Condition: excellent (used), Year of construction: 2008, The cleaning system is designed for aqueous cleaners (alkaline or acidic). Maximum basket dimensions: 480 x 320 x 200 Maximum basket load: 50 kg Wash tank capacity: 280 l Wash tank heating: 15 kW Wash spray pressure: 4.3 bar Dsb E Ihfjwh Szij Teut

Year of construction: 1996, Condition: good (used), Parts cleaning system with ultrasonic cleaning system Manufacturer: LPW Type: Programat FW670/1 Duob E Ihfoi Ra Sfe Tst Year of manufacture: 1996 Medium: Water Heating capacity of dryer: 12 kW Exhaust air: 500 m³/h 400 V 90 A 50 Hz Filling capacity: 0.6 m³ Heating capacity of other baths: 12 kW Electrical connection: 50 kW Ultrasonic cleaning system rated power: 4 kW Length without table: 3000 mm Length with table: 3700 mm Width: 1600 mm Height: 2500 mm Approx. weight: 3 tons ä080525

Year of construction: 2022, Condition: new, LCT bio. X A 100 Biologically based small parts cleaner including 80 liters LCT Bio Liquid cleaning fluid Bag filter Magnet for separating metal chips Washable prefilter Cleaning temperature is a comfortable 41 ° C Environmentally friendly Long service life of the cleaner little space required Duob E Ioffhnljhf Tet additional options are possible: Filter housing with washable nylon filter Insert sheet made of V2A to protect the plastic surface Trolley

Year of construction: 2014, Condition: good (used), Serial No. 2.930, wire-link belt, throughput width 250 mm, throughput height 100 mm, spray cleaning with flat jet nozzles, multi-tank system (500 l rinse tank + 800 l wash tank), heating, Siemens PLC control with touch display, switch and control cabinets, stainless steel collecting tray Dueb Eswg E Nwo Ihf Tet

Year of construction: 2008, Condition: used, filling amount 180 l Dujb E Ihfewgi Epe Tjt injection pressure 1,3 bar 700 l/min diameter 800 mm voltage 400 V frequency 50 Hz dimensions ca. 1200x1300x1100 mm weight of the machine ca. 300 kg

Condition: excellent (used), Year of construction: 2014, Functionality: fully functional, Semmelroth parts washer Pass-through parts washer Parts cleaning Year of construction 2014 Type: Based on linear systems, cycle systems have additional advantages. The precise positioning of the parts to be washed makes it possible to process specific problem areas and difficult geometries, e.g. blind holes, threaded holes, undercuts. In addition, channels, for example, can be adapted and thus completely rinsed. The use of product carriers also allows component families to be cleaned with the same system. Complete integration into production lines, including automated loading and unloading by robots, for example, completes an optimum processing system. Special features: - Single and multi-stage processes with up to 3 baths - Completely made of stainless steel - High-quality components and units from European manufacturers - Variable transport system (belt, chain or overhead conveyor technology) with optional recirculation - Air circulation drying with blower - Zone separation through lifting doors Optional equipment: - Process monitoring (flow rate, pressure, conductivity, pH value, etc.) Dujb E Iovcnbvohf Tot - Filter technology - Steam condenser (air and water-cooled) - Oil separator - Dosing system - Inspection window and interior lighting - Additional rinsing baths - Waste water piping and waste water pump - Floor pan with leakage warning probe - and much more... If you have any further questions, please contact us. Viewing is possible at any time. We will be happy to answer any further questions you may have.

Year of construction: 2005, Condition: like new (used), Functionality: fully functional, maximum load weight: 1,000 kg, inner dimension height: 1,200 mm, inner dimension length: 1,390 mm, inner dimension width: 1,390 mm, net weight: 1,600 kg, nominal power: 64,000 kW (87,015.68 HP), pump capacity: 500 l/min, pump pressure: 450,000 bar, water tank capacity: 800 l, machine/vehicle number: 25191, A machine for industrial cleaning of machinery and parts. It has 3 washing chambers, one main and 2 auxiliary. The technical condition of the equipment is excellent - used only a few times. Model number: C-1600-33EHSS-PD1 Serial number: 25191 Deb Ejrkz Sts Ihf Tjut List of main parts of the machine: Door to washing chamber (on cylinders). Upper washing nozzle Lower washing nozzle Pressure piping Control cabinet Washing pump Auxiliary pump 1 Auxiliary pump 2 Water heater (for each chamber) Drain valve Water level sensor Basket for washing elements Oil separator Steam vent Water pressure indicators Automatic water filling and chemical dosing system In addition, we offer a reverse osmosis water filter in the set.

Year of construction: 2023, Condition: new, Functionality: fully functional, machine/vehicle number: 23.025.264, The HP25T parts washer is designed for washing, with water-based detergents, at a maximum temperature of 45°C. The machine is built in AISI 304 stainless steel and is particularly suitable for washing small and medium-sized parts. This machine bases its operation on the use of a gun, fed by a 60 bar aqueous solution, via a piston pump, controlled by a pedal. * The machine is supplied with a blowing gun, included in the price. DETAILS : - Usable width : 800 mm - Usable depth : 600 mm Dujb E Iev Dt Ttohf Tst - Usable height : 500 mm - Loading height : 1085 mm - Permissible load : 50 Kg - Dimensions (L*D*H) : 1140X940Xh2020mm FEATURES : - Construction in Aisi 304 stainless steel - High pressure piston pump connected to the washing gun - Level control - Electric heating regulated by a thermostat - Blowing gun (optional) - Removable work surface

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) Dujb E Iewhc Sxjhf Tst ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Year of construction: 2022, Condition: excellent (used), Functionality: fully functional, General Project No.: 905711 Quantity: 1 pc. Manufacturer: TEKNOX Type: ROTOR M 2B HT Control: Weintek SPS Year build: 2022 Condition: Used Machine Shifts Maschine on approx. (hrs): 1-2 shift Description PARTS CLEANING Cleaning solvent: water based Front-Top-Loader Washing container with high pressure pump 900 l Cleaning/flushing container with high pressure pump 900 l Vacuum drying External pneumatic oil separator Rotary-/Swivel unit Filter for washing container Roller conveyor outside Transport Cart for 4 basketsmm Max. weight per basket max. 250 kg FURTHER EQUIPMENT Modem for remote diagnosis and TeleService Djb Eev Azd Rs Ihf Tjut GENERAL TECHNICAL DATA Air supply 8 bar Mains fuse 108 A Machine weight approx. 1800 kg Remarks We described the specified product with the upmost attention. As this product is not manufactured by us, the mentioned data and description can deviate. Herewith, we point out that they are non-binding and ask you to check them during your inspection.

Condition: refurbished (used), Year of construction: 2001, Functionality: fully functional, Used parts cleaning system / single chamber spray cleaning system The system was partially overhauled by the manufacturer in 2023 for €9,000 and is in very good condition. Deb E Iotgtn Ijhf Tout All technical data and information can be found in the operating instructions.

Condition: good (used), Year of construction: 2021, Functionality: fully functional, total width: 2,000 mm, total length: 1,770 mm, total height: 1,650 mm, pressure: 6.1 bar, input voltage: 400 V, power: 15.4 kW (20.94 HP), maximum load weight: 350 kg, cage diameter: 1,100 mm, compressed air connection: 6 bar, frequency: 50 Hz, heating capacity: 7.5 kW (10.20 HP), injection pressure: 6.1 bar, temperature: 75 °C, type of input current: three-phase, usable height: 600 mm, Industrial washing machine for cleaning and degreasing workpieces by means of an alkaline cleaning agent. Machine made entirely of stainless steel AISI 1.4301. Equipped with double walls with insulation in between. Rotating basket for parts with sprayers for detergent at the top and bottom. Built-in filter for coarse dirt. Equipped with a detergent pump and a drain pump to be able to pump away the used cleaning fluid. Level switches in the tank for detecting the liquid level. Monitoring of any leaks. Switch cabinet with digital temperature display. Cabinet equipped with signal lamp for status indication. Machine is in very good condition and can be used immediately. Djb E Ihewfdbcsf Tjut

Condition: like new (used), Functionality: fully functional, Year of construction: 2018, MIELE laboratory dishwasher with AD water connection, liquid dosing, DryPlus & conductivity monitoring • Capacity/batch e.g. 128 laboratory bottles • Safety – rinsing pressure, spray arm and conductivity monitoring • 72% less water consumption • Efficient hot air drying – DryPlus Deb E Iev Aknrohf Tout FURTHER TECHNICAL DATA PLEASE REFER TO THE ATTACHED PDF

Year of construction: 1981, Condition: used, Parts cleaning machine Pero Rob 3 - 3455 Year of manufacture: 1981 Dsb E Ielu Ex Hehf Teut Technical data: Operating voltage: 380 V Rated current: 103 A Total heating power: 60 kW Interior dimensions : 2100mm x 1100mm x 800mm L x W x H Outside dimensions : approx. 4300mm x 2100mm x 2800mm L x W x H

Condition: new, ESP Top Loading Spray Washing Machines ESP series are designed for efficient cleaning of industrial parts with pressurized hot water plus a biodegradable detergent. The ESP range has very low operating cost and consumption, the body and structure is made entirely of corrosion free stainless steel material and heavy duty components. This type of machine is correct choice for cleaning oil, grease, production residues off the surface of parts and anticorrosive protection applications. The ESP range of spray washers are supplied with a stainless steel pump, nozzles, heaters and motorised basket as standard features. Dobjt Rrko E Ihf Teut - Top opening gas spring assisted machine lid - Motorised stainless steel component basket - Stainless steel spray bar assemblies above, below and at the side - Integral fluid filtration system - Basket jog feature - Chemical & corrosion resistant stainless steel pump - Electrical powered fluid heating On customers demand these machines will also be built with a drying air blower. Depending on Top-Loader model: Basket diam. 820 - 1250 mm, loading weight 80 - 300 kg, spray pressure 1,8 - 3,5 bar (27 - 52,5 psi), heating: 4,5 - 12 kW, Options: digital timer and thermostat, oil skimmer, filtration, stainless steel loading car

Condition: used, Year of construction: 2010, Functionality: fully functional, machine/vehicle number: 10.152.82L, empty load weight: 400 kg, load capacity: 350 kg, water pressure: 2.4 bar, Heatable for aqueous cleaning agents. For removing oil and grease contamination in the shortest possible time. Universally applicable for the fully automated cleaning of small parts from production, manufacturing, and maintenance, such as bolts, sleeves, and ball bearings. 2129908 Easy to use thanks to the fully automated cleaning process. This allows specialists to concentrate on other important tasks. The wash tank is filled with a mixture of water and water-soluble IBS special cleaner (washing solution). The soiled items are placed in the rotating wash basket and the lid is closed. After setting the desired wash temperature and time, the device is switched on and the suds in the tank are heated. When the device is closed, the basket rotates around its own axis at a constant speed. The pump units suck the washing solution from the wash tank and pump it through six stainless steel nozzle pipes with overlapping flat jet nozzles. The items being cleaned are intensively sprayed with hot lye from all sides as the motor-driven basket rotates evenly. The device shuts off automatically after the cleaning process is complete. ∙∙ 2 pumps arranged horizontally ∙∙ 6 three-dimensional stainless steel nozzle pipes ∙∙ Robust stainless steel construction ∙∙ Additional stainless steel small parts cleaning basket ∙∙ Rotating stainless steel wash basket, V-belt driven by a separate motor ∙∙ Steam extraction ∙∙ Stainless steel screen plate with filter basket above the wash tank ∙∙ Low water protection device ∙∙ Individually height-adjustable feet WxDxH (closed): 1970 x 1790 x 1500 mm WxDxH (open): 1970 x 2090 x 2425 mm Useful height: 800 mm Duob E Ihfjwfgl Do Tjt Load capacity: 350 kg / optionally 500 kg Basket diameter: 1293 mm Wash tank capacity: 340 liters Pump pressure: 2.4 bar Spray volume: 2 x 10,800 L/h Power requirement: 15.1 kW / 400 V / 50 Hz, 32 A Weight: 400 kg Temperature: 0-60°C

Year of construction: 2014, Condition: excellent (used), Functionality: fully functional, YUKON DAD 2BL (built in 2014) For clean components on a continuous basis Stainless steel continuous cleaning system with oil separator for continuous material flow. The items to be cleaned pass continuously, in cycles if necessary, through the consecutive treatment zones. Cleaning is achieved by passing the items past the permanently installed nozzle systems. For parts with a maximum dimension of 400 x 100 mm A wire-link conveyor conveys the components horizontally or vertically through the cleaning system • Circumferential nozzle frame - the offset nozzle arrangement enables cleaning on all sides • Separation of the treatment zones reduces mixing • Adaptation of the nozzles and nozzle frames to the component • Adaptation of the usable dimensions, load capacities, and pump outputs is possible The process steps take place in consecutive treatment zones: • Spray cleaning, cascading of different wet treatment zones (washing, degreasing, phosphating, rinsing, passivation) • Drying Tank volume: Wash tank: 800 liters Rinse tank: 500 liters Heating capacity: Wash tank: 48.0 kW Deb E Iewbt H Hehf Tout Rinse tank: 30.0 kW Wash tank pump: 3.0 kW Rinse tank pump: 2.2 kW Washing pump pressure: 3 bar Rinsing pump pressure: 2 bar Drying fan: 2.2 kW Drying heater: 18 kW Operating temperature min. 45°C to max. 60°C WE HAVE 2 IDENTICAL MACHINES AVAILABLE

Year of construction: 2024, Condition: new, Metalclean P80 Spray Cleaning System in Stainless Steel 1-tank spray cleaning system with rotating basket. Useful dimensions= D= 780 mm H= 430mm Dusb E Ihoir Apvof Tst load capacity / charge = 100 KG Tank capacity = 130 liters Spray pressure = 3 bar Operating voltage = 3 x 400 V/N/PE 50 Hz Vapor extraction

Year of construction: 2025, Condition: as good as new (ex-display), HD washbasin - HD brush washbasin The washbasin has an adjustable 60 bar high pressure pump with which cleaning takes place in a closed work area. The cleaning takes place with an aqueous degreaser (10kg included in delivery) and at approx. 45 ° C. Viewing window including lighting Medium filtration through a candle filter Comfort operation by means of a foot switch including turntable Technical specifications: Working area: 1,200 x 700 mm Usable height: 400 mm Deb E Ihohl Iftsf Tout Payload: 50 kg Operating pressure: adjustable up to max. 60 bar Pump output: 14 lt / min Washing temperature: adjustable up to max. 45 ° C Tank capacity: 170 lt Heating capacity: 4,000 W. Total output: 8.0 kW Voltage: 400 V ac 1 P + N + PE; Frequency: 50 Hz Machine weight: approx. 180 kg Overall dimensions with the lid open: 1,480 x 991 x 2,080 mm

Year of construction: 1996, Condition: good (used), Parts Cleaning System Manufacturer: LPW Type: Programat FW670/1 Year of Construction: 1996 Medium: Water Heating Capacity of Dryer: 12 kW Exhaust Air: 500 m³/h 400 V 90 A 50 Hz Filling Capacity: 0.6 m³ Heating Capacity of Other Baths: 12 kW Electrical Power: 50 kW Dob E Ihfji Ra Sio Teut Length without table: 3000 mm Length with table: 3700 mm Width: 1600 mm Height: 2500 mm Approx. Weight: 3 tons 170425ä

Year of construction: 2019, Condition: excellent (used), Very well-preserved rotating basket, parts wash, lacquer milling booth with all accessories for sale. Description: Cabin dimensions: Width: 2,245 m² Depth: 2.3 m Height: 2.48 m² Total height: 3,156 m² Tank capacity: ~ 1000 l Heating capacity: 18 kW Chemical pressure: 3 bar Chemical operating temperature: 60-80 ° C Pumps: Calpeda MXH 406 2 pieces Deb E Ihfjhlvvue Tjut Heat exchanger: 20 kW Engine: Bonfignioli M05A4FD Motor power: 12 kW Exhaust system: Fan type: GE-500 H-J Capacity: 5000 m3 / h Power: 3 kW Maximum load 500 kg Equipment: Dimensions of the turntable hand-rinsing cubicle: 3.1 x 3 x 2.9 m 2 hand trucks 2 washing frames

Year of construction: 2015, Condition: reconditioned (used), Functionality: fully functional, Function Easy handling thanks to fully automatic cleaning process. This allows professionals to focus on other important tasks. The wash tank is filled with a mixture of water and water-soluble IBS-Special Cleaner WAS (washing lye). The soiled parts are placed in the rotatable washing basket and the lid is closed. After setting the desired wash temperature and time, the device is switched on and the lye is being heated in the tank. In the closed device, the basket rotates at constant speed around its own axis. The pump aggregates draw the lye from the washing tank and transport it through 6 stainless steel nozzle tubes with overlapping flat jet nozzles. The soiled parts are radiated intensively with the hot lye from all sides with a uniform rotation of the motor-driven basket. After completing the cleaning process, the device switches off automatically. Advantage 2 pumps arranged horizontally 6 three-dimensional stainless-steel nozzle tubes robust stainless-steel design additional small parts cleaning basket made of stainless steel (Ø 170 mm) rotating washing basket made of stainless steel, V-belt drive via separate motor steam extraction stainless steel screen with filter basket above the wash tank intake filter in front of the pump shaft water indicator stands are individually adjustable in height Technical data Tank capacity 280 l Basket diameter 1150 mm Capacity 350 kg / optional 500 kg Temperature min. - max. 0-60 °C Working height 700 mm Dimensions (W x D x H) 1570 x 1510 / 1830 x 1495 / 2175 mm Weight 250 kg Heizleistung 10 kW Spray rate 2x10800 l/h Strömungsdruck Pumpe 2,3 bar Material Stainless steel Dueb E Iehctwwshf Tot Power supply 13,5 kW/ 400 V /50 Hz / 32 A

Condition: used, Year of construction: 2009, Thermal deburring system Dujb E Ihfswffbqe Tjt ATL Luhden Power 30 kW

Year of construction: 2025, Condition: as good as new (ex-display), HD washbasin - HD brush washbasin Washstand has an adjustable 60 bar HD pump with which the cleaning takes place in a closed working chamber. The cleaning is done by means of aqueous degreaser (10kg included in delivery) and at approx. 45°C. Viewing window incl. lighting Medium filtration via candle filter Comfort operation by means of foot switch inclusive turntable technical data: Working surface: 800 x 600 mm useful height: 400 mm load capacity: 50 kg Operating pressure: adjustable up to max. 60 bar Pump capacity: 14 lt/min Washing temperature: adjustable up to max. 45°C Tank capacity: 100 lt Heating capacity: 3.000 W Power, total: 7,0 kW Debed H Umro E Ihf Tsut Voltage: 400 V ac 1 P+N+PE; Frequency: 50 Hz Machine weight: approx. 140 kg Overall dimensions with open lid: 1,100 x 910 x 2,020 mm

Condition: used, Year of construction: 2009, Functionality: fully functional, machine/vehicle number: 10059, LPW PowerJet cleaning system Dob E Ijwfd I Aohf Tsut