Used Material testing for sale (495)

Condition: good (used), CTS Type: T-70/600/S Temperature test chamber water-cooled Refrigerant: Converted to R-452A Control: - 32 bit controller Cgolsvitmdoq A Azgst - LCD control panel - Digital display of setpoints and actual values - Numerical input of setpoints - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Technical performance data Temperature tests: Temperature range -70 °C to +180 °C Temperature deviation ±0.1 to ±0.3 K in time Temperature change rate according to IEC 60068-3-5 Heating 2.5 K/min Cooling 2.5 K/min Heat radiation approx. 2500 W at +20°C approx. 2500 W at + 0°C approx. 1800 W at -40°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions Height, approx. 850 mm, width, approx. 850 mm, depth, approx. 830 mm External dimensions Height, approx. 1900 mm, width, approx. 1120 mm, depth, approx. 1875 mm Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 8.8 kW Nominal current 14.8 A Protection class IP 22 Weight approx. 700 kg Refrigerant: R-452A / R23 Weight: 700 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, CTS Type: CW-50/8 Ex Water-cooled climatic test cell Type CW -50/8 Ex 1) C means: Climate 2) W means: Walk in 3) -50 means: lower temperature -50 °C 4) 8 means: 8m³ test chamber volume 5) Ex means: Test chamber in explosion-proof design according to EC Directive 94/9EG (ATEX 95) Temperature range: -50°C to +120°C Humidity range: 10 to 95% RH Dew point range: +5°C to +89°C Rated voltage: 400V 3/N 50Hz Rated power: 31.3 kW Rated current: 49.3 A Compressor: 4EC-4.2Y/4CC-6.2Y Refrigerant: R404A/R23 Technical performance data: Temperature tests: Temperature range -50 °C to+120 °C Temperature deviation ±0.5 to 1 K temporal ±2 K, spatial, with a wall distance of 100 mm Average rate of temperature change without test material and without heat radiation Measured in the supply air Heating: 1 K/min from -40°C to +80°C Cooling: 1 K/min from +80°C to -40°C Climate tests: Temperature range +10 °C to +95 °C Humidity range 10 % to 95 % rel. humidity without heat radiation in the dew point range +5 °C to +89 °C Temperature deviation ± 0.5 K in time Humidity deviation ±1 - ±3 % RH over time The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test material, without heat compensation and without additional equipment. Dimensions: Test volume 8 m³ Test chamber dimensions: Width: approx. 1850 mm Depth: approx. 2200 mm Height: approx. 2000 mm External dimensions: Width: approx 2200 mm Depth: approx 4200 mm Height: approx 2600 mm Technical design: Refrigeration unit: water-cooled, low-noise, semi-hermetic, infinitely variable capacity adjustment by electronic monitoring and control system, Cgelqet Ifzto A Azget environmentally friendly refrigerant R 404 A/R23 Control system: 32 bit controller LCD control panel Digital display of set and actual values Numerical input of setpoints Error messages in plain text Ethernet interface RS 232 interface Free switching channels for on-site test material control Weight: approx. 3000 kg Condition: second-hand / used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Espec Type: TSD-100 100 liters of usable space for larger test specimens up to 30 kg. Complies with all current international standards. Water-cooled Temperature range hot chamber: +60 °C to +200 °C Cold chamber temperature range: -70 °C to 0 °C Test chamber dimensions: 710 x 345 x 410 (W x H x D) in mm External dimensions: 1100 x 1885 x 1965 (W x H x D) in mm Cgolq A Azst I S Rhsget Water-cooled refrigeration unit Program control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile version 2 stainless steel test baskets Cable gland Ø 100 mm Refrigerant: 3 kg R404A 1kg R23 Power supply: 400V 3Ph 50Hz Max. Current consumption: 32A Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Atlas Type: CI3000 F Atlas CI3000 Xenon Fade-Ometer The Ci3000+ Weather-Ometer and the Fade-Ometer with its advanced digital control systems, represent monumental achievements in the application of digital and optical technologies in easy-to-use laboratory weathering instruments. The 3000 series is recognized by many OEMs in the textile, paint, coatings and plastics industries as the exclusive platform for precise, reproducible and repeatable results, reproducible and repeatable life prediction results. Colq A Aeucd Rbezgjgt Features: Type Climate Test type Sunlight simulation Light source with xenon arc lamp Applications: Additives and colorants Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Compressed air supply The CI3000 humidification system works with a compressed air ultrasonic spray nozzle. Before entering the system, the compressed air must be passed through a water/oil separator. The small air regulator in the Cİ3000 contains a second water/oil filter and a 5 micron solid filter. Make sure that a separate oil/water separator is installed and do not rely on the air regulator filter, as this is only designed as an additional device. Compressed air specifications Pressure 80-100 PSI (552-689 kPa) Flow rate 4 CFM (0.11 m³/min) Dimensions: Overall dimensions of the C13000 37.5 width X 29 depth X 72" height (95 width X 73 depth X 183cm height) Required footprint: 41.5 width X 80" depth (105 width X 203cm depth) Total weight: 404 kg Voltage: 380-220 V 38 A 50 Hz 〜3/N/PE 8 kW 404 kg Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Espec Type: TSD-100 100 liters of usable space for larger test specimens up to 30 kg. Complies with all current international standards. Water-cooled Temperature range hot chamber: +60 °C to +200 °C Coleugl H Soq A Azgegt Temperature range cold chamber: 0 °C to -70 °C Test chamber dimensions: 710 x 345 x 410 (W x H x D) in mm External dimensions: 1100 x 1885 x 1965 (W x H x D) in mm Water-cooled refrigeration unit Program control via touch panel Automatic defrosting Overtemperature protection Operating hours counter Mobile version 2 stainless steel test baskets Cable gland Ø 100 mm Refrigerant: R404A 1kg R23 Power supply: 400V 3Ph 50Hz Max. Current consumption: 32A Condition: gebraucht / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Zwick / Roell Type: Mflow Area of application With increasing test volumes, the need for a higher degree of automation also increases (compared to the Cflow). The Mflow is a modularly expandable device, with which you can determine the melt mass and melt volume flow rate. The basic version of the Mflow extrusion plastometer is designed for MFR tests according to method A and can be upgraded for MVR tests according to method B. Tests according to the following standards are possible: - Methods A and B according to ISO 1133 - Methods A, B and C according to ASTM D 1238 - ASTM D 3364 - JIS K 7210 As an option, you can equip the Mflow with the pneumatic weight lift with and without cleaning function, for example. without cleaning function or weight staking. The Mflow can be operated both stand-alone via a modern touch display, as well as with the ZwickRoell testing software on a PC. Technical data Test load: 0.325 - 21.6 kg Compressed air, lubricated, dry: 6 - 10 bar Dimensions Cgelq A Azjtq Em Togjt Height: 510 mm Width: 360 mm Depth: 419 mm Weight: approx. approx.: 43 kg Test temperature: +50°C - +450°C Display: Capacitive touch display Resolution of the temperature display: < 0.1 K Number of storable parameter sets: >100 Temperature accuracy in the range 0 - 75 mm above the nozzle in the temperature range 50°C - 450°C: < 0,3 K Time measurement Error limit (method A): ± 0.02 (with automatic cut-off device) Error limit (method B): ± 0.01 Displacement measurement Error limit (method B): ±0.02 mm (ISO 1133) / ±0.4 % of 6.25 mm (ASTM D 1238) Resolution: < 0.005 Multi-device operation on one PC: Available working memory, min.: 1.54 GB Clock frequency: 3 GHz Connectable Mflow extrusion plastometers per PC: 6 Mains connection: 220 - 240 V, 1L/PE/N Power consumption: 2.6 A Mains frequency: 50/60 Hz SW version: V4.2 Year of manufacture: 2021 Condition: used / second-hand Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We can answer further questions for you on the phone.

Condition: excellent (used), RS. simulators Type: ST2K320/45 K Water-cooled shock test system Temperatures in the upper test chamber Temperature range: + 40 °C to + 180 °C Time deviation: ± 0.8 K according to DIN 50011 with empty test chamber Temperatures in the lower test chamber Temperature range: - 40 °C to +100 °C Time deviation: ± 0.8 K according to DIN 50011 with empty test chamber Humidity in the upper test room Climatic temperature range: + 40 °C to +90 °C Humidity range: 20 % to 98 % (± 2 to 5 %) relative humidity Humidity: 25% to 75% relative humidity Working climate range: Temperature: + 12 °C to + 30 °C Humidity: 25 % to 75 % relative humidity Dimensions: Width 900 mm Height 2000 mm Depth 2300 mm Test room dimensions: Width 470 mm Depth 700 mm Height 440 mm Electrical power supply: Total power: 13 KVA Current consumption: 25 A Voltage: 3x400V/N/PE / 50Hz Refrigerant: R404A/2.5 kg Chamber: approx. 950 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Cgolq Ajtrf Ulj Azgst

Condition: excellent (used), Sonix Type: Echo VS Acoustic scanning microscope enables the inspection of packaging. Celq Aotz Rkms Azgsgt Features: To detect the smallest and most subtle defects in state-of-the-art packaged microelectronics applications, ECHO VS includes standard features such as heated water for optimal acoustic coupling, flexible TAMI for efficient acquisition of the most useful data, Waveform Averaging for improved signal-to-noise ratio, ICEBERG for improved image quality and MFCI for improved image quality in the most demanding applications. ECHO VS is the ultimate ultrasonic NDT device for molded flip chips, CSP, MCM, stacked die, MUF and other advanced packaging technologies. Detects air defects as small as 0.01 microns and spatially resolves defects down to 5 microns. Image enhancement suite with heated water, waveform simulation and other innovations for industry-leading image quality in advanced packaging applications Image optimization for improved image quality in complex molded flip chips (MUF) and packages with polyimide layers Waveform averaging for improved signal-to-noise ratio Wide range of converters from very low to ultra-high frequency Stacked Die Imaging (SDI) (optional) Molded Flip Chip Imaging (MFCI) Voltage / power consumption: 100-120/220-240 VAC 1PH/N/PE, 50/60 Hz 10 A Condition: gebraucht / used Scope of delivery: (see picture) (Subject to changes and errors in the technical data and specifications!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), VLM Type: V.745.672.120 Model CC 1000-FL HL Corrosion test chamber for salt spray tests Specifications: Test chamber volume: approx. 1000 L Test chamber dimensions (ΒχΤχΗ1/Η2): 1400x800x800/1020 mm Door opening dimensions (WxH): 1300x680 mm External housing dimensions втн: 2162 x 995 x 2080 mm Operating temperature range: 5°C > room temperature to +80°C High-load version for loads up to 350 kg Process control: Beckhoff PLC, color touch screen display display, 50 memory locations for test procedures, 50 Memory locations for test segments, ramps: Cgolq Aot Igc Ss Azgot Humidity-temperature over the entire working range, Ether connection Electrical connection: 400 V, 50 Hz, 5700 W Tap water: min. 2.5 bar Tap connection 3/4" External thread for connecting an ion exchanger cartridge Compressed air: 7-8 bar Waste water: Siphon / 30 mm ID hose nozzle Exhaust air: pipe end OD 75 mm Operating systems: Salt spray Condensation water (CWC) Ventilation Room air Warm air Controlled humidity

Condition: excellent (used), Vötsch Type: LTU 60/60 Heraeus Vötsch dryer for coating materials Maximum concentration of flammable substances of 40 % of the lower explosion limit (LEL) Highest temperature of the heating surface above 750 °C Device description: Technical data: Interior (usable space) 0.216 m3 Internal dimensions: Width 600 mm Height 600 mm Depth 600 mm External dimensions: Total width 796 mm Height 1725 mm Depth 850 mm Cgslq A Azjun Rrqsgjt Loading / load capacity Total roller conveyor 55 kg Loading height above installation floor 820 mm Weight (net) kg 275 Minimum exhaust air volume flow 96 m3/h Purge time 5-fold air change 90 sec. Increased recirculation air volume flow 33 m3/h Total vapor space 0.414 m3 Sound pressure level (according to DIN 45635) < 70 dB(A) Switch-off temperature Temperature limiter (TB) fixed setting 300 °C Temperature selector limiter (TWB) adjustable above nominal temperature 20 Temperature safety class (according to EN 60519-2) Temperature limiter (TB) 1 Temperature selector limiter (TWB) 2 Nominal temperature 200 °C Electrical data Rated voltage / frequency 400V, 3/(N)PE, AC 50/60 Hz Rated current 12.0 A Nominal power 6.0 kW Connected load 7.0 kW Weight: 275kg Condition: second-hand / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Vötsch Type: VT 7021 Air-cooled temperature test chamber Operating terminal Color touch panel Microprocessor monitoring and control MINCON/32 independent adjustable temperature limiter tmin / tmax adjustable software temperature limiter min./max. RS 232 serial interface Schuko socket potential-free contact for test material switch-off Air-cooled refrigeration unit 1 lockable door, single-handed operation Calibration of 2 temperature values Mobile version 1x feed-through, NW 80 mm 2x feed-through, NW 125 mm Test chamber volume 210 liters Temperature range -70°C to +180°C Temperature deviation in time ± 0.2 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 1.5 K Cgeljuuf Rnoq A Azgjt Temperature change rate heating 2.5 K/min Temperature change rate cooling 2.5 K/min Max. heat compensation 800 W Test chamber dimensions: Width 560 mm Depth 570 mm Height 630 mm External dimensions: Width 850 mm Depth 1250 mm Height 1640 mm Electrical connection: 1/NPE AC 230 V ± 10% 50Hz Rated power approx. 1.8 kW Rated current 12 A Refrigerant: R404A and R23 Weight: 355 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), LDS Type: V895-440 HBT900C with amplifier SPA50K Technical data: Fitting Dimensions: 440 mm Sinusoidal force vector 55.6 kN (peak) Rausch force vector 55.6 kN (effective) Half sine force vector 166.8 kN (peak) Frequency range 0 to 2100 Hz Sinusoidal acceleration max. 981 m/s² Noise Acceleration max. 490 m/s² Speed max. 1.6 m/s Deflection ± 63.5 mm Oscillator mass 55 kg Max. load 700 kg Amplifier dimensions : WxHxD mm : 537mm x 1905mm x 895mm Weight 622 kg Cgolq A Asuy H I Tezgst Sliding table: Work surface: 900 mm * 900 mm Thickness of the top : 50 mm Weight of the top: 80.4 kg Max load : 7250kg Effective frequency range 5-2000 Hz Condition : gebraucht / used Total weight (table + shaker): approx. 7000 kg Shaker + table dimensions: LxHxW approx. 2700 x 1500 x 1800 mm Scope of delivery: (see pictures) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), White Type: WK-1000/40/5 Weiss climatic test chamber with Weiss air-cooled condenser S!MCON / 32 control unit Test chamber capacity: approx. 990 liters Test chamber dimensions: Height 950 mm, width 1100 mm, depth 950 mm, External dimensions: Height 1995 mm, width 1390 mm, depth 1855 mm, Data for operation: Test room lighting Halogen bulb 24V, 50W Nominal voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated power 23 KW Rated current: 33 A Data for temperature tests: Temperature range: -40 to +180 °C Temperature deviation in time in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature change rate Heating: 6.1 K/min Cooling: 6.7 K/min Heat compensation max. 5000 W Data for climate tests Temperature range: +10 to +95 °C Humidity range: 10 to 98 % r.h. Temperature deviation in time in the center of the usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Humidity fluctuation over time in the center of the usable space: ± 1 to ± 3 % r.h. Dimensions incl. feet Width x depth x height: 1190 x 1120 x 1093 mm Refrigerant: R404 A 5.2 kg Weight: approx. 840 kg Condition: used Cgslqsu Ap Smj A Azget Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, Heraeus Vötsch Type: VT 4021 Heraeus Vötsch temperature test chamber air-cooled Celqsu Hf Hhs A Azgjgt Housing dimensions: Width 850 mm Depth 1250 mm Height 1640 mm Interior: Width 560 mm Depth 570 mm Height 630 mm Temperature range -40°C to + 180°C Temperature deviation in time ±0.2 to ±0.5 K Spatial temperature deviation ±0.5 to ±1.5 K Temperature change rate cooling 3.1 K/min Temperature change rate heating 2.5 K/min Nominal voltage: 1/N/PE AC 230V±10% 50Hz Rated power: 1.5 kW Rated current: 7 A 2X side feed-through 90 mm Refrigerant: R-404A Weight approx. 325 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), RMS Type: SW 3509 + amplifier TGD 6000-000.00 and fan Test Manager SWR 900 Power amplifier: TGD 6000 Vibration exciter: SW 3709 High-pressure fan HVM 80-100 GL 270 RMS electrodynamic vibration test system: Technical data system: Performance data Max. Vector force sine 7.5 kN Max. Vector force noise 6.75 kN Max. Vector force shock 13.1 kN Frequency range 0 - 3000 Hz Mass of the vibrating system (Dyn.) 9 kg Main resonance (unloaded) 2.5 kHz Max. Amplitude (sine) 18 mm (noise, shock) 26 mm Colsu Tud Hjq A Azgsgt Max. speed (sine) 1.5 m/s (noise, shock) 2.5 m/s Max. Acceleration sine vibrating system unloaded 833 m/s² Additional load 10 kg 394 m/s² Additional load 30 kg 192 m/s² Additional load 50 kg 127 m/s² Max. Acceleration noise Additional load 30 kg 173 m/s² Max. Acceleration shock vibrating system unloaded 1450 m/s² Additional load 30 kg 335 m/s² Stray field Stray field without counter field coil On the table surface 20 mT 120mm above the table surface 7 mT Stray field with counter field coil On the table surface 10 mT 120mm above the table surface 2 mT Vibration isolator Operating range vertical/ horizontal Resonant frequency 2.7 Hz Operating air pressure 5 bar Pneumatic weight compensation Max. Weight compensation 250 kg Operating air pressure 2.3 bar Cooling Vibration exciter air min. Cooling air volume 9 m/min Max. exhaust air temperature (based on room temperature 35°C) 80°C Power booster air Heat dissipation to room air 1.5 kw Emission: Sound pressure level 1m - distance at a height of 1.6m 105 dBA Electromagnetic field SW 3709 typ. 1.5 mT ( 50Hz) typ. 0.5 mT (100Hz) Electromagnetic field TGD 3000 typ. 150 HT (50Hz) Dimensions / Weights Table diameter / insert thread 224mm / M8 Vibration exciter with integrated isolators 970 × 695 x 950 mm (W x D x H) Weight: 1200 kg Power amplifier 550 x 700 x 2075 mm (W x D x H) Weight: 270 kg Cooling fan 839 x 582 x 900 mm (W x D x H) Weight: 80 kg Connection values: Mains voltage +6/-10% 3 x 400V, 50Hz Connected load 18 KVA Power consumption (sweep mode sine wave) 12 kW Total weight approx. 2000 kg Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Here we offer a Jouan C02 incubator CO2 incubator. The CO2 incubator is used to grow cell cultures. The following conditions are required for this: a sterile atmosphere a constant temperature a CO2-enriched atmosphere high humidity Dimensions and weight: Temperature range: room temperature + 5 ° C to 50 ° C CO2 detector: Infrared Size: 90 x 73 x 60cm Internal dimensions: 66 x 48 x 45 cm Outer material: steel Interior material: Stainless steel Inner door: Safety glass CO2 Incubator Jouan IG 150 Water jacket volume 85 liters maximum Volume 154 liters Maximum number of trays (3 supplied) Colq A Azsccb N Uogegt Usable area per tray 0.16 m2 Usable maximum incubation area: 1.28 m2 minimum spacing height 66 mm empty weight approx. 80 kg Weight when filled with water approx. 170 kg Weight with packaging approx. 100 kg Power connection required: 230 V, 50 or 60 Hz. Power consumption max. 800 VA, normal consumption at 37 °C: 220 watts Fuses therm. Magnetic switch, set to 5 A at 220 V Phases earthed. Color of connections brown = phase, blue = neutral, yellow/green = earth Working range: Ambient temperature 15 - 30°C CO2 inlet pressure 300 mbar - 3 bar Interior temperature range from 5°C above room temperature to 45°C Working range with CO2 gas 0.0 % to 20.0 0/0 Article weight: 80.00 kg Type IG 150 Scope of delivery: (see picture) 2 weeks commissioning guarantee The device comes from stock. We deliver with express shipping (DHL, UPS, TNT) We will be happy to answer any further questions you may have on the phone.

Condition: good (used), Here we offer you an S & A test chamber for parametric testing. S & A test chamber for parametric testing Temperature range: 55°C to +150°C Stability: ± 0.1 ° C including the effects of mains voltage, ambient temperature and ageing. temperature and ageing Cooling medium: Water-cooled mechanical cooling Chamber can be controlled remotely via IEEE bus or RS232C interface Weight approx. 250 kg Colqjcnic Sj A Azgsgt Type: 4220A Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a Despatch lab oven. Despatch Laboratory Ovens + 8 "WAFER LCC: Maximum temperature 260 ° C Lockable circuit breakers turn on the control panel for easy maintenance Protocol 3 control with large LCD display, built-in data logging capabilities and USB port for easy oven setup and data export Edelstellenne room with interior seams welded continuously on the insulation side to protect the working space from pollution Programmable door locking prevents the operator from opening the oven door while the cycle is running The door lock switch turns off the heating when the door is open The rolled air flow consists of 100% HEPA (High Efficiency Particulate Air) and is filtered to ISO Class 5 (Class 100) throughout the process cycle The Magnehelic Manometer monitors the pressure drop of the HEPA filter so you know when to replace the filter Electric door unlocking for ergonomic operation UL & C-UL Listed Control Panel Open Modbus communication connection (RS485) for remote monitoring and recording Celq Aod Nfq Is Azgogt Chamber measure L 350 mm Chamber measure B 350 mm Chamber Measure H 350 mm Maximum temperature 260°C Digital screen Yes Electric connection 230 V Total size L 830 mm Total dimensions B 910 mm Total Measure H 560 mm Type: LCC1-16NV-3 Condition: used/used Delivery: (See picture) (Changes and errors in technical D

Condition: excellent (used), Vötsch Type: VC 4200/S Climate test chamber 2500 liters water-cooled Temperature test: Temperature range -40°C to + 180°C Temperature deviation in time: ± 0.3 to ± 1.0 Spatial temperature deviation: ± 1.0 to ± 2.0 Temperature gradient 2 to 4 Heating speed: 2.0 K/min Cooling rate: 3.0 K/min Climatic tests: Temperature range: +10 °C to +90 °C Temperature deviation over time: ± 0.1 to ± 0.5 Temperature deviation over time: ± 1 to ± 1.5 Temperature gradient 2 to 3 Humidity range: 10% to 98% r.h. Humidity deviation over time: + 1 to 3 % r.h. Dew point range +5 to +89°C Test room dimensions: Width approx. 2000 mm x depth 1150 mm x height 1150 mm Cgolq A Aju Au Utjzgot External dimensions: Width approx. 3500 mm x depth 1450 mm x height 2100 mm Nominal voltage 3/N/PE AC 400 V ±10%50Hz Rated power 13 kW Nominal current 21 A Refrigerant R-452A Weight approx. 1350 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Heraeus temperature chamber Here we offer a temperature chamber. Water-cooled Outside: W x D x H (mm) 1100 x 2200 x 2320 Inside: W x D x H (mm) 800 x 800 x 790 Test chamber volume 500 L Characteristic values for temperature tests: Temp. range -70°C to +180°C Heating speed: 3 K/min Cooling speed: 2 K/min Electrical power: Rated power 15 kW Rated current 26 A 400 V +6/-10% 3/N 50Hz Weights: 675 kg Type: HT/S 7050 R404 A and R23 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. refilling with legally compliant refrigerant 3. after successful inspection, the chambers are subjected to a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone. Cgelq A Aou Efm Sozgjt

Condition: excellent (used), Vötsch Type: VT³ 4150 Vötsch temperature test chamber Air-cooled Rated voltage: 3/N/PE AC, 400 V ±10 %, 50 Hz Rated power: 11.5 kW Rated current: 22.0 A Rate of change: Cooling approx. 3.5 K/min. Rate of change: Heating approx. 4 K/min. Temperature test Temperature range -40°C to + 180°C Display plan External dimensions: W x D x H approx. 1390 x 2380 x 1995 mm Test chamber dimensions: W x D x H approx. 1100 x 1475 x 950 mm Weight approx. 1020 kg / 1540 liters Refrigerant R 404A The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components Colq A Azsu Nh Rbegjgt 2. if necessary, refilling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), CTS Climatic test chamber T-70/600 water-cooled Temperature range: -70°C to +180°C Rated voltage: 400V 3/N PE 50 Hz Rated power: 6.7 kW Rated current: 10.2 A Compressor: TFH2480Z/TFH2511Z Refrigerant R23/R404A Control system: -Microprocessor-controlled control and monitoring system Simple, user-friendly terminal built into the door. -Digital temperature setpoint and actual value display Simple variation via +/- button -Digital input for temperature in °C -PLC compatible -Up to 100 test programs possible -RS 232 interface -2 free switching channels for on-site test material control Insert grid: Stainless steel, contact surface 820 x 710 mm Load per grid max. 35 kg Total load with max. grid configuration 100 kg Cooling unit: Water-cooled, low-noise, fully hermetic Infinitely variable power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R404A/R23 Temperature tests: Temperature range -70 °C to+ 180 °C Temperature deviation ±0.1 to 10.3 K in time Rate of temperature change according to DIN 50 011, part 12 measured in the center of the test room Heating 2.5 K/min Cooling 2 K/min Heat radiation max. 1500 W at +20°C The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test material, without irradiation and without additional equipment. Dimensions: Test volume 600 liters Test chamber dimensions 850 x 830 x 850 mm (W x Dx H) External dimensions 1050 x 1850 x 1900 mm (W x DxH) Operating data: Electrical connection 400 V +6/-10 %, 3/N, 50 Hz Rated power 6.7 kW Rated current: 10.2 A Protection class IP 22 Condensate drain unpressurized R 1/2" internal thread Sound pressure level < 62 dB(A) Weight approx. 400 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Celq Asvaxq Ne Azgsgt Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: used, CTS Type: TS -70/600-13 Temperature test chamber, water-cooled Type series: TS -70/600-13 Control system: - 32 bit controller - LCD control panel - Digital display of setpoints and actual values - Numerical input of setpoint values - Error messages in plain text - RS 232 interface - Free switching channels for on-site test material control Cgelq Ajvcyaws Azgot Test chamber volume: 600 liters Test chamber dimensions: Height approx. 730 mm, width approx. 850 mm, depth approx. 830 mm External dimensions: Height approx. 2250 mm, width approx. 1300 mm, depth approx. 2475 mm Temperature range: -70 to +180°C Heating speed: 13 K/min at -40°C to +120°C Cooling speed: 13 K/min at 120°C to -40°C Temperature deviation: ± 0.1K temporal, ± 0.5 K spatial Electrical connection 400/3P/N/PE Nominal power: approx. 27.8 kW Nominal current: approx. 44.1 A Compressor: 4TC-8.2Y/4PC-10.2Y Refrigerant: R-404 A / R-23 Weight: 1350 kg The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a Weiss climatic test chamber. Water-cooled Test chamber lighting Halogen bulb 24V, 50W Data for temperature tests: Cslq A Azjq Dpzysgjgt Temperature range: -40°C to +180°C Temporal temperature deviation in the center of the chamber: ± 0.3 to ± 0.8 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature change rate Heating: 10 K/min Cooling: 12.5 K/min Heat compensation at +20°C 8000 W Heat compensation at -20°C 3000 W Data for climate tests Temperature range: +10°C to +95°C Humidity range: 10 to 98 % r.h. Temperature deviation in time in the center of the usable space: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Humidity fluctuation over time in the center of the usable space: ± 1 to ± 3 % RH Test chamber dimensions: Height 950 mm, width 760 mm, depth 650 mm, External dimensions: Height 2025 mm, width 1090 mm, depth 2480 mm, Nominal voltage: 3/N/PE AC 400 V ± 10% 50 Hz Rated current: 24 A Rated power: 16.0 KW Refrigerant: R452A Weight: approx. 900 kg Type: WK-480/40/10 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Here we offer a Weiss temperature chamber. Weiss temperature test chamber With S!MCON / 32 control Water-cooled (refrigerant converted to R-452A) Touch panel" control unit All control and operating commands can be triggered on the "touch panel" control unit by simply touching the function icons. all control and operating commands by simply touching the function icons. Levelling feet To compensate for uneven floors and to ensure adequate ventilation of the machine part, the test chamber is equipped with adjustable feet. Feed-throughs The test chamber is equipped with feed-throughs on the right and left side. Measuring cables and test equipment can be routed through these into the test chamber. Feed-through built into basic equipment R1: NW 125 mm Celq Asrbigfs Azgjgt L1: NW 50 mm Test chamber capacity: approx. 335 liters Test chamber dimensions: Height 750 mm, width 580 mm, depth 765 mm External dimensions: Height 1775 mm, width 870 mm, depth 1600 mm Data for temperature tests: Temperature range: -42 to +180 °C Temperature deviation over time in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1.5 K Temperature change rate Heating: 3.2 K/min Cooling: 4.0 K/min Heat compensation max. 2300 W Data for operation: Test room lighting Halogen bulb 2x 24V, 50W Rated voltage: 3/N / PE AC 400 V ± 10% 50 Hz Rated current: 14 A Rated power 4.1 kW On-site fuse 16 A slow-blow Sound pressure level approx. measured at a distance of 1 m from the front. 1m height 56 dB(A) Refrigerant: R-452A Weight: 515 kg Type: WT3-340/40 The following information is for your safety as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.