Year of construction: 2005, condition: used, Rotary die-cutter Curioni Plus 240x165 vacuum introduction 3 colors Polishing machine Castaldini year 2005 equipped with soundproof cabin Pgsdpfex Hgf Tjx Akcok

Condition: good (used), Year of construction: 2000, Brand: Cevenini ED400 Year of manufacture: 2000 Technical data: Max. log width: 1600 mm Max. roll diameter: 400 mm Min. slitting width: 3 mm Indexing tolerance: +/- 0.1 mm Accessories: - 1 knife - 1 spraying unit - 1 shaft D 76 mm Pjdoy A S Rmjpfx Akcsgk - 1 knife sharpening device - 1 set of original documentation The machine was completely overhauled 5 years ago. New Siemens control system with visualization.

Condition: used, functionality: fully functional, overall weight: 4,500 kg, Drossert die-cutting press, working area 72 x 102 cm, 1 frame, various operating modes, single cycle, continuous operation, programmable with timer, safety mats. Psdpfx Akoyu H Ivjcegk

Condition: reconditioned (used), Year of construction: 1968, functionality: fully functional, machine/vehicle number: 7923278, type of input current: three-phase, total width: 2,440 mm, total length: 3,320 mm, total height: 2,130 mm, overall weight: 8,200 kg, input frequency: 50 Hz, input current: 30 A, nominal power: 7.5 kW (10.20 HP), rotational speed (max.): 4,600 rpm, rotational speed (min.): 1,500 rpm, space requirement width: 2,440 mm, 72x102 cm die cutter for thin paper and light carton up to 600 gsm. Exceptionally stable and very silent fast cylinder press. Floor anchoring is not necessary. Pgedpsx Hzm Sofx Akcsk

Condition: good (used), Year of construction: 1987, functionality: fully functional, Shaftless unwinding with the following parameters Max. jumbo roll width: 1400 mm Min. jumbo roll width: 480 mm Max. jumbo roll diameter: 1600 mm Clamping head diameter: 150 mm and 300 mm Psdsxlizfjpfx Akcjgk Min. speed: 300 m/min The control system can be renewed by us upon request.

Condition: excellent (used), Year of construction: 2002, Maximum jumbo roll width 1300 mm Jumbo roll diameter max 1000 mm (1200 mm without splice table) Winding diameter max 600 mm Operating speed 300 m/min Cutting width possible from 20 mm Year of manufacture 2002 Accessories: - 1 unwind tension shaft D 76 mm - 2 friction winding shafts D 76 mm - 10 upper and lower knives - 1 edge guiding system - 1 cutting table - 1 extraction system for edge trims Pgsdpfxjxyihnj Akcok - silicone-coated guide rollers, suitable for adhesive tapes - with documentation

Condition: excellent (used), Year of construction: 2001, Jumbo roll diameter paper max. 1600 mm Jumbo roll width min. 560 mm Jumbo roll width max. 1400 mm Jumbo roll diameter PE, PET max. 1000 mm Core chucks diameter 76 mm, 100 mm, 150 mm, and 300 mm Speed depending on material: 200 to 300 m/min. The laminating machine Bielloni Castello Julia 2 SL is able to process single-component polyurethane (PU) adhesives with 100% solids content (solvent-free). The adhesive is applied using a sleeve system. Dispersion adhesives cannot be processed. The system does not include a drying unit. The PU adhesive is applied to the carton web with heated rollers (approx. 70–90 °C). Bonding between carton and film is achieved by pressure and subsequent self-curing. Podpfx Aoxlkckekcogk Paper grammage: 120 to 600 g/m², laminated with PET: min. 8 microns to max. 75 microns PE: min. 20 microns to max. 75 microns

Condition: used, 2025 generalüberholt Buchdruckzylinder / 2025 complete overhauld Letter Press Cylinder DIE Cutter Heidelberg SBB Buchdruckzylinder / Letter Press Cylinder DIE Cutter Heidelberg SBB Pjdpeyuw S Esfx Akcjgk >>2025 generalüberholt / 2025 complete overhauld

Condition: excellent (used), Year of construction: 2003, operating hours: 40,000 h, functionality: fully functional, cutting width (max.): 115 mm, color channels: 5, Good working condition, only cutter Pgodpfx Akjhtncuscek

Condition: used, Used Premier Labellers model P150 tamper evident labeller. Can do front and back tamper evident seals/labels to cartons and boxes. Approximate capacity 150PCS/min. Pgodpfx Asymazyskcok

Condition: excellent (used), Year of construction: 1976, Iberica LM55 year 1976 format 100×70 B1 Pedpfx Akeyzgr Njcegk

Condition: used, Year of construction: 2004, functionality: fully functional, Heidelberg KD 78 KTLL folding machine – Year 2004. Overhauled with new extra grip rollers on the parallel fold, pneumatic window buckle, SAK 78 delivery. Pedpfx Aeyzptpskcogk

Condition: ready for operation (used), Year of construction: 1991, A W+D envelope manufacturing line is available. Blank length range: 265mm-653mm, blank width range: 214mm-726mm, max. production output: 450/min, paper weight range: 80g/m²-150g/m², max. paper roll diameter: 1500mm, max. paper roll width: 686mm, window reel width range: 30mm-490mm, window material section length range: 55mm-280mm. Documentation available. An on-site inspection is possible. Pgedpfx Asyyy Nlokcok

Condition: ready for operation (used), Year of construction: 1979, An envelope manufacturing system W+D for special formats, photo pouches, mailings and multiple foldings without gumming is available. Paper weight range: 70g/m²-270g/m², min. bottom flap pre-creasing: 10mm, max. side flap pre-creasing: 50mm, max. paper width: 620mm, max. paper length range: 150mm-470mm, bottom flap folding range: 25mm-45mm, min. format with 38mm fold: 115mm/100mm, max. format with 20mm fold: 280mm/380mm, min. closing flap: 50mm. Documentation available. An on-site inspection is possible. Pgedpfx Aoyyy Nfokcok

Year of construction: 1992, condition: ready for operation (used), A hydraulic industrial system Schneider for paper and cardboard processing is available. Power: 28kW, oil filling: 400l, operating pressure: 100bar-240bar, max. table load: 300kg, max. product dimensions X/Y: 2000mm/3200mm, weight: approx. 7900kg. An on-site inspection is possible. Pjdpfx Aoyyy I Ujkcsgk

Condition: used, Elektrische Exzenterpresse / Electric Eccentric Press Komex Eccentric Die Cutting Machine Pjdoyt H Ndepfx Akcsgk Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: excellent (used), Year of construction: 2024, functionality: fully functional, working width: 2,500 mm, 1.1 Used Göpfert SRE Maxi 250 1.2 Brand: Göpfert 1.3 Model: SRE Maxi 250 1.4 Year: 2004 Podpjyyuxuefx Akcogk 1.5 Country of origin: Germany 1.6 Z- tools (4) Tools for handholes, etc. 1.7 1 color flexo printing unit (2800mm width, 6 repeats) 1.8 Max. Sheet size: 2500x6500mm 1.9 Max. Printing size 2500x2500mm 1.10 Min. Printing size 360x1000mm 1.11 Conveyer length 6000mm

Condition: ready for operation (used), Year of construction: 1994, A Stiegler side weld bag-making machine in need of repair is available. Working width: 1000mm, film material: PE/PP, feed range: 80mm-600mm, max. clearance: 900mm, film width range: 200mm-1380mm, film thickness range: 0.025mm-0.085mm, output: 160cycles/min, max. C-fold triangle: 1380mm. Including bottom gusset device, hot stamping units, thermal transfer units, ribbon unwinding unit, unwinding station and various accessories. The control system of the line must be renewed. Documentation available. An on-site inspection is possible. Pgedpfjyx H H Uex Akcok

Condition: used, Year of construction: 2014, Material: PET aluminum-metallized film Material thickness: 9–50 μm Web width: 500–2000 mm Roll width: 2100 mm Web diameter (unwind): max. φ1150 mm Web weight (unwind): max. 1500 kg Product winding diameter: • φ600 mm (3” friction shaft) • φ750 mm (6” air shaft) Winding shaft load: max. 500 kg/shaft (center-supported) Core dimensions: • Web core: 3” (φ76.2–76.5 mm), 6” (φ152.4– 153 mm) • Product core width: 100–1050 mm Slit width: 200–1950 mm (up to 5 slits) Machine speed: max. 400 m/min Typical operating speed: 200–250 m/min Unwinding tension: • 50–500 N (φ650 mm or less) 1. Unwinding Section • Shaftless single-axis fixed unwind • Direction: upward or downward • Automatic tension control with feedback detector • Dancer roll included • Core clamping: rotary mechanical chuck • Core sizes: 3” standard, 6” via adapter • Web alignment: manual ±5 mm, automatic ±100 mm 2. Main Drive Rollers • Multiple rollers with specified diameters and surface finishes Podpfxjx Ez Ums Akcogk • Nip and touch rollers with pneumatic pressure control 3. Slitting Mechanism • Upper/lower NC shear cutter • Number of blade units: 6 upper + 6 lower • Slit width adjustment via touch panel • Accuracy: ±0.1–0.2 mm • Dust suction: upper blade nozzles + lower blade suction • Optional razor cutter (manual adjustment) 4. Mini Winder Placement: below slitter Units: 2 (left / right) Drive: AC servo motor Tension: dancer roll control Traverse width: 300 mm Winding diameter: φ500 mm 5. Winding Section • Duplex center drive • 3” air friction shaft + 6” air shaft • Automatic tension control linked to winding diameter • Touch roll with pressure control • Core positioning via collar bar 6. Product Discharge • Hydraulic lift tray • Motorized slide-out with tilt mechanism Electrical & control: Line motor: 7.5 kW AC servo Winding motor: 11 kW AC induction Unwinding motor: 11 kW AC servo Static eliminators: 5 units (Keyence SJ-HA) Control panels: main panel, winding panel, unwind panel, mini winder panel, auxiliary panel PLC: Fuji Electric Utilities, dimensions & environment: Power supply: AC 200 V, 60 Hz, 3-phase Power consumption: 70 kVA Air supply: 0.5 MPa, 500 L/min (dry air) Machine weight: approx. 12 tons Paint color: urethane coating (E-31872) Installation environment: cleanroom Class 10,000 Floor load capacity requirement: ≥ 2 ton/m²

Condition: used, Year of construction: 2022, Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Pjdpfx Akoyx Uy Ascjgk Materials to be slit: • Paper-based / liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder control for lifting parent rolls from the floor. • Two motors driving the unwinding roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3”) cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6”) cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway allowing web threading at floor level while keeping full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cut performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with a dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • A separator roller driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on materials). • Pressure is adjustable and synchronized with winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a transverse knife with linear motion and a backing plate for securing the web onto new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a centralized system or container (not included). Rewinding section: • Motorized turret (two-position) supporting two rewinding shafts. • Rewinding shaft drive by an oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, equipped with full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips with individual bladders.

Condition: used, Year of construction: 1999, • Shaftless unwinder A • Shaftless unwinder B • Coating unit (adhesive application system) • Laminating unit • Winder (rewinding unit) • Film tension control system (including dancing rollers and load cells) • Automatic web guide unit • Rubber-coated impression roller • Decentrable rollers • Electrical, pneumatic, and control systems ADHESIVE SYSTEM • Solventless adhesive application system • Adhesive feed system Pedpfx Aoyx Dk Rjkcegk • Metering rollers • Transfer rollers for glue application • Rubber-coated coating/impression roller • Integrated glue mixer (included in scope) • Minimum supply: at least 3 transfer rollers included PROCESSING CAPABILITIES • Designed for lamination of flexible films • Compatible with solventless adhesives • Continuous coating and laminating process • Rewinding of laminated material onto final reel • Adjustable coating quantity via metering rollers • Adjustable lamination pressure CONTROL AND SYSTEMS • Electric system with control cabinet • Pneumatic system • Film tension control via load cells and dancing rollers • Web guiding system for alignment • Vapour suction system • Rollers conditioning system • Optional corona treatment system TECHNICAL FEATURES • Professional industrial laminating machine • Continuous operation design • Multi-section configuration: unwinding, coating, laminating, rewinding • Designed for stable operation under controlled environmental conditions • CE compliant (European Machinery Directive) MATERIAL HANDLING • Dual unwinding system for two substrates • Precision tension control during processing • Rewinding system for finished laminate • Compatibility with different film materials (as per process requirements)

Condition: used, Year of construction: 1985, used die-cutting press, year of manufacture 1985, size 82x112, equipped with pneumatic clutch Pgsdpfsyx Hpvox Akcsk

Year of construction: 2004, condition: ready for operation (used), A defective flatbed die-cutting machine IMG Klett is available. Chase inner dimensions X/Y: 1630mm/1210mm, max. cutting dimensions X/Y: 1600mm/1180mm, min. sheet dimensions X/Y: 650mm/450mm, max. sheet dimensions X/Y: 1200mm/1620mm, min. sheet thickness: 1mm, max. corrugated board thickness: 8mm, max. plastic corrugated material thickness: 8mm, gripper margin waste area: 9mm-15mm, max. cutting force: 400t, motor power: 22kW. Machine dimensions X/Y/Z: approx. 7550mm/5200mm/2450mm, weight: approx. 32000kg. Documentation available. An on-site inspection is possible. Pgsdpfxjyxq Ucs Akcok

Condition: used, Format: 560 x 770 mm Pgjdpsyxqupefx Akcjk

Condition: ready for operation (used), machine/vehicle number: 154.1004.094, Professional Neolt Electro Foam Trim Plus 310 horizontal cutting machine for foam board, PVC, cardboard and similar materials. This is a high-quality Italian industrial cutter with a maximum working width of 310 cm, suitable for sign making, printing industry and production environments. Main features: • Manufacturer: Neolt (Italy) • Model: Electro Foam Trim Plus 310 • Working width: 310 cm Pjdpfx Akeywpcpjcsgk • Electric cutting system • High precision cutting • Suitable for foam board, PVC, cardboard and similar materials Included accessories • Multiple blade holders: 5 mm, 10 mm, 20 mm and 30 mm • Spare blades included • Original manual • Electrical spare parts (circuit boards etc.)• Additional accessories and components Condition: Machine is in good working condition and fully functional. Cutting accuracy is very good. The main unit is clean and well maintained. Support tables show normal signs of use. Additional information: • Maximum cutting thickness up to 30 mm (depending on blade holder) • Currently equipped with 10 mm blade holder • Mounted on wheels for easy movement • Support tables included Logistics Machine available for immediate pickup. Located in Finland. Loading assistance available. Extra Video available showing cutting operation! Complete set with accessories and spare parts – ready for professional use! Keywords: foam board cutter Neolt cutter electric cutter horizontal cutter foam trim sign making equipment large format cutter