Condition: used, Year of construction: 1997, approx. 107 million prints 37 ×52 cm (14×20″) CPC-104 CP-Tronic Alcolor Autoplate Streamfeeder Fpsln Ueui U I Eo U Eieg Autom. Ink roller-, blanket and impressioncylinder wash-up device Perfecting 2/2, Low-pile delivery Plusversion Powder sprayer Available: at short term

Condition: used, Year of construction: 2024, KOLBUS Cloth Cutter KS 601 year 2024 Slitting and cross cutting machine for roll material. Suitable for the processing of calico, linen, leatherette, wax cloth, gauze, shirting, PVC and other similar coated materials. Configuration: - main drive with servo drive - operating desk for standard and inching operation including speed adjustment - moveable material mounting shafts Special equipment: - cross cutting module and split cutting module with 10 circular knives - deposit delivery Technical specifications: mechanical speed: up to 50 cuts/min material width max.: 1.600 mm cutting width max.: 1.524 mm Feln U Uevnrl Ne Eispg cutting width min.: 50 mm length of cut max.: 1.100 mm length of cut min.: 100 mm

Condition: used, connected load frequency 230 V Perforating/creasing machine Grafiscor Year of manufacture unknown Working width up to approx. 42 cm - Underfloor suction feeder - Alignment section with ball bar - Delivery Fpoln Uswfxlcs U Eiog The machine was assembled by the previous owner from various devices/parts as a self-construction.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 76,609 h, Functionality: fully functional, machine/vehicle number: 85215, resolution (max.): 600 dpi, input current: 30 A, input voltage: 400 V, The machine features a machine-controlled (Siemens) roll-to-roll extension. The roll unwinder has a capacity of approximately 2000 linear meters. The rewinder features a scissor-cut slitter with six blades for separating the webs or cutting the hole edges. Feln U U Eov Izxxeispg The entire system is open for inspection and is in immaculate condition. The machine was fully serviced until February 2025. There is no maintenance or repair backlog. Various spare and wear parts, as well as toner, are still available and included in the offer.

Condition: excellent (used), Year of construction: 2020, operating hours: 13,051 h, Functionality: fully functional, input voltage: 240 V, Markforged ONYX Pro, Gen2. Able to print continuous fibres into nylon parts. The Onyx pro mainly printed with Nylon and fibreglass. This printer has recently had Mark Two Print head fit allowing you print Carbon and Kevlar. I have been able to use 3DXTech Obsidian, Fibreethree and Fiberon PA-CF20 Nylon with great success. Equal in print quality when printing with mark forged ONYX but at A quarter the price when using Fiberon. I have had the machine the since new, May 2020. It is exceptional machine and produces great strong parts. Our was printing carabiners for safety lanyards. And these carabiners were able to withstand 350+ kg using only fibreglass. So if you want to produce strong end use parts this is a great machine. Any questions please do ask. Comes the original Dry Box to store the Nylon while Printing Folnewg Ey As U U Eiepg Ships in Non-Original Box

Condition: reconditioned (used), Year of construction: 1999, Functionality: fully functional, BM5134- Subject to confirmation and remaining unsold -> Year of manufacture 1999 (also other models available) -> medium format up to 75 x 105 cm, pile height 130 cm -> with protective housing / safety fence This Transomat was used for unloading a high-speed cutter ,standing on the right. The Polar Transomat automatically places split and unsplit layers on pallets while simultaneously continuing to cut - reducing production costs by 25-70% depending on the cutting programme. Thanks to the patented, movable pallet tip, the Polar Transomat achieves a particularly high level of edge accuracy. Increase in productivity: destacking simultaneously with cutting Improved quality: stacks with particularly accurate edges can be Fpoln U U Eswh Rvreijg further processed directly and faster.

Condition: used, Year of construction: 1995, Gathering machine Horizon HAC15 Tower a/b/m 4x15 stations 1 gathering tower HAC 15a 1 gathering tower HAC 15b 2 gathering towers HAC 15m 15 stations each friction feeder with 40mm loading height each delivery / stacking table Stielow ST-20 Technical data: Paper size max. 31,8 x 7mm paper size min. 14,8 x 21mm missing/double sheet control paper weights 40 - 200 g/sqm Output approx. 4800 cycles/h Fjlnjntdw Tj U U Eiepg

Condition: excellent (used), BM5139 High Qaulity paper drilling machine. Fpoljv Idfnjn U U Eiog Professional production equipment standing model electric operated - foot pedal triggered heavy duty construction For paper, plastic, textiles, leather - two speed drilling. With automatic lift - two button or foot pedal operated. You are welcome to test this machine with us. We can arrange transport/packaging and loading onto truck or in container. Ask for our price - but your offers are also welcomed.

Condition: used, Year of construction: 1988, Stahl Folder T 49-4 4 buckles Fslnsruu Hzo U U Eijpg 1 blade

Condition: used, Year of construction: 2009, Duplo DC-445 Du-Creaser grooving machine good condition Fpeln U Uoqw Eknj Eisg available at short notice

Condition: used, Year of construction: 2010, approx. 176 million prints 53 x 74 cm (20×29″) PressCenter AxisControl Alcolor Autoplate extended delivery Autom. Ink roller washing device, automatic blanket washing device, automatic counter-pressure washing device high pile delivery separate coating unit with chamber doctor blade system IR dryer, AirStar, inking unit temperature control perfecting 2/3 Fslsp Ugwtjn U U Eijpg antistatic device scale feeder powder device, available at short-notice

Condition: used, Year of construction: 2002, Roundpilefeeder RD.2-78 1 station TD-78 6 pockets 2. station TD-66 4 pockets Delivery SBP-M 86.D Glueing device Rear -and front-mounted slitter shafts Fjln U U Eoud U D Ieispg Gate-fold unit Available: at short term

Condition: used, Rhin-O-Tuff Wire-O-Punch PAL-14 PIKS-A-LIFT Paper Picker Modul Die-Cutter HD7700 Lay-Down Unit Tools: Fpslnetvhvnj U U Eieg 3:1 round 3:1 square 2:1 square

Year of construction: 2006, Condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Fslnoh Nrh Us U U Eispg Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Condition: used, Year of construction: 2002, 1,96 Mio. cuts approx. good working condition availalbe March/April 2025 Fpjln U U Eovn I E Soieg

Condition: used, Year of construction: 2004, 84,5 Mio prints approx. Format: 370×520 mm (14×20″) ClassicCenter Fjln U U Eev Idddjiepg Alcolor Autoplate Technotrans cooling Streamfeeder Autom. blanket wash-up device Low-pile delivery Powder sprayer Available: at short term

Condition: used, Year of construction: 2000, 75 Mio. imprints approx. 370×520 mm (14×20″) CP-Tronic Alcolor with Technotranscooling, Autoplate Streamfeeder, Autom. ink roller washer, Autom. blanket washer, Autom. impressioncylinder washer, Fjln U Uev D Izfe Eispg Low-pile delivery Powder sprayer Available: at short term

Condition: used, Year of construction: 2007, Laminating machine Foliant Gemini 400 S Technical data: Working width: 380 mm Fpeln U Uevt T Ipo Eijg Sheets (B3) per hour: 1200 / 1800 (400 GA) Format max. 38 x 58 cm Format min. 32 x 25 cm Machine dimensions: 700 x 1170 x 800 mm

Condition: used, Year of construction: 1998, Stahl Folder TI 52-4 Fi Format: 52 x 84 cm Fpsln U U Eev S Azpoijg FI52 - Flat pile feeder available at short notice

Condition: used, Year of construction: 2011, only approx. 91,500 cuts Maximum cutting width: 76 cm Maximum paper length: 76 cm Dimensions: Length 1900 mm, width 1400 mm, height 1450 mm Fpjlsv Tztaen U U Eisg Weight: 1000 kg Cutting speed: 42 cuts per minute comes from a school Top condition - like new

Condition: used, Electric table punch for plastic effect binding Triggered by foot pedal, 220V connection Incl. manual binding device Working width: 320 mm Manufacturer: probably Renz- unfortunately no type plate available anymore Can be inspected on site in production Fpsln Uov Sbl Ho U Eieg available at short notice

Condition: used, Year of construction: 2025, Polar N115 Accessories: Resopal air tables 100 x 100 cm, left and right Fpeln U Ujv I Tzfj Eijg Knife changing tool 2 HSS knives on-board tooling

Condition: used, Year of construction: 2005, TB sprint 304 QSM stitch-fold-trim unit Format open max.: 35 x 50 cm Format open min.: 6.5 x 15.5 cm Fsln Ush I Ahxe U Eispg smallest booklet: 6.5 cm spine length x 4 cm with head-foot trim: 10.5 cm spine length x 4 cm largest brochure: 35 cm spine length x 25 cm with head-foot trimming: 34.6 cm spine length x 4 cm Up to 3100 cycles/h, depending on format and paper Front cutting device with upper/lower blade for cutting to 4 cm and sections larger than 1.5 cm, infinitely variable motorised format adjustment of the front cut with additional handwheel for fine adjustment, head and foot trimming of 3 - 20 mm each for approx. 120 pages of standard 80 g/m² paper 4 stiching heads

Condition: used, Year of construction: 2007, Format: max. 540x1000mm; min. 100x148mm Paper weight: 40-250g/sqm Loading capacity: 55mm Output: max. 45,000 cycles/h compatible with: Horizon AFC-544AKT, Horizon AFC-546AKT Horizon AFC-564AKT, Horizon AFC-566AKT Fjlnoup Ut Us U U Eispg Horizon AFC-566F, Horizon AFC-566FKT Weight: 518kg good working condition available at short notice

Condition: used, Year of construction: 2016, Total prints: 3,768,802 Color: 3,316,984 Fpjln U U Ejwcfd Heisg B/W: 451,818 Machine can still be viewed in production and prints excellent quality Available at short notice