Condition: used, Year of construction: 2000, approx. 34 million prints Format:36 x 52 cm Varn Kompac dampening Plus version Straight machine Fpebvdkov Ax R Isutog available April 2025

Condition: used, Year of construction: 2024, KOLBUS Cloth Cutter KS 601 year 2024 Slitting and cross cutting machine for roll material. Suitable for the processing of calico, linen, leatherette, wax cloth, gauze, shirting, PVC and other similar coated materials. Configuration: - main drive with servo drive - operating desk for standard and inching operation including speed adjustment - moveable material mounting shafts Fpjbvsvnrl Nodkutog Special equipment: - cross cutting module and split cutting module with 10 circular knives - deposit delivery Technical specifications: mechanical speed: up to 50 cuts/min material width max.: 1.600 mm cutting width max.: 1.524 mm cutting width min.: 50 mm length of cut max.: 1.100 mm length of cut min.: 100 mm

Condition: used, connected load frequency 230 V Perforating/creasing machine Fpsbvdjwfxlcokutjg Grafiscor Year of manufacture unknown Working width up to approx. 42 cm - Underfloor suction feeder - Alignment section with ball bar - Delivery The machine was assembled by the previous owner from various devices/parts as a self-construction.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 76,609 h, Functionality: fully functional, machine/vehicle number: 85215, resolution (max.): 600 dpi, input current: 30 A, input voltage: 400 V, The machine features a machine-controlled (Siemens) roll-to-roll extension. The roll unwinder has a capacity of approximately 2000 linear meters. The rewinder features a scissor-cut slitter with six blades for separating the webs or cutting the hole edges. Fpsbjv Izxxsvdkutjg The entire system is open for inspection and is in immaculate condition. The machine was fully serviced until February 2025. There is no maintenance or repair backlog. Various spare and wear parts, as well as toner, are still available and included in the offer.

Condition: used, 2-spindle paper drilling machine Nagel Citiborma 280b good working condition Fpsbvdkorudbfoutjg short-term available

Condition: used, Year of construction: 1997, approx. 107 million prints 37 ×52 cm (14×20″) CPC-104 CP-Tronic Alcolor Autoplate Streamfeeder Autom. Ink roller-, blanket and impressioncylinder wash-up device Perfecting 2/2, Low-pile delivery Plusversion Fjboui U I Eevdkutepg Powder sprayer Available: at short term

Condition: used, Gathering Machine Laconda B4 Fjbotvrpljvdkutjpg 25 stations with double sheet and missing sheet control good working condition short-term available

Year of construction: 2006, Condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination Fobvdkujh Nrh Uetspg 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Condition: used, Year of construction: 2009, Duplo DC-445 Du-Creaser grooving machine good condition Fpjbvoqw Eknedkutjg available at short notice

Condition: used, Year of construction: 2010, approx. 176 million prints 53 x 74 cm (20×29″) PressCenter AxisControl Alcolor Autoplate extended delivery Autom. Ink roller washing device, automatic blanket washing device, automatic counter-pressure washing device high pile delivery Fpebvep Ugwtodkuteg separate coating unit with chamber doctor blade system IR dryer, AirStar, inking unit temperature control perfecting 2/3 antistatic device scale feeder powder device, available at short-notice

Condition: used, Year of construction: 1995, Gathering machine Horizon HAC15 Tower a/b/m 4x15 stations 1 gathering tower HAC 15a 1 gathering tower HAC 15b 2 gathering towers HAC 15m 15 stations each friction feeder with 40mm loading height each delivery / stacking table Stielow ST-20 Technical data: Fpjbvdkentdw Tsutjg Paper size max. 31,8 x 7mm paper size min. 14,8 x 21mm missing/double sheet control paper weights 40 - 200 g/sqm Output approx. 4800 cycles/h

Condition: used, Year of construction: 2002, 1,96 Mio. cuts approx. Fpjbvdevn I E Sjkutjg good working condition availalbe March/April 2025

Condition: used, Year of construction: 2000, 75 Mio. imprints approx. 370×520 mm (14×20″) CP-Tronic Alcolor with Technotranscooling, Autoplate Streamfeeder, Fpsbjv D Izfsvdkutog Autom. ink roller washer, Autom. blanket washer, Autom. impressioncylinder washer, Low-pile delivery Powder sprayer Available: at short term

Condition: used, Rhin-O-Tuff Wire-O-Punch PAL-14 PIKS-A-LIFT Paper Picker Modul Die-Cutter HD7700 Fpjbvjtvhvnodkutjg Lay-Down Unit Tools: 3:1 round 3:1 square 2:1 square

Condition: used, Year of construction: 2002, Roundpilefeeder RD.2-78 Fsbvjud U D Isdkutopg 1 station TD-78 6 pockets 2. station TD-66 4 pockets Delivery SBP-M 86.D Glueing device Rear -and front-mounted slitter shafts Gate-fold unit Available: at short term

Condition: used, Year of construction: 1988, Stahl Folder T 49-4 4 buckles Fsbvdkuoruu Hzotspg 1 blade

Condition: used, Year of construction: 2004, 84,5 Mio prints approx. Format: 370×520 mm (14×20″) ClassicCenter Alcolor Autoplate Technotrans cooling Streamfeeder Autom. blanket wash-up device Low-pile delivery Fpebvdov Idddjkutsg Powder sprayer Available: at short term

Condition: used, Year of construction: 2007, Laminating machine Foliant Gemini 400 S Fpsbovt T Ipjvdkutog Technical data: Working width: 380 mm Sheets (B3) per hour: 1200 / 1800 (400 GA) Format max. 38 x 58 cm Format min. 32 x 25 cm Machine dimensions: 700 x 1170 x 800 mm

Condition: used, Year of construction: 1998, Stahl Folder TI 52-4 Fi Format: 52 x 84 cm FI52 - Flat pile feeder Fpebvjv S Azpodkutjg available at short notice

Condition: used, Year of construction: 2011, only approx. 91,500 cuts Maximum cutting width: 76 cm Maximum paper length: 76 cm Dimensions: Length 1900 mm, width 1400 mm, height 1450 mm Weight: 1000 kg Cutting speed: 42 cuts per minute comes from a school Top condition - like new Fsbvdkuov Tztajtjpg

Condition: used, Electric table punch for plastic effect binding Triggered by foot pedal, 220V connection Incl. manual binding device Working width: 320 mm Manufacturer: probably Renz- unfortunately no type plate available anymore Can be inspected on site in production Fpebev Sbl Hjvdkutsg available at short notice

Condition: used, Year of construction: 2025, Polar N115 Accessories: Resopal air tables 100 x 100 cm, left and right Knife changing tool 2 HSS knives Fpebsv I Tzfjvdkutsg on-board tooling

Condition: used, Year of construction: 2005, TB sprint 304 QSM stitch-fold-trim unit Format open max.: 35 x 50 cm Format open min.: 6.5 x 15.5 cm smallest booklet: 6.5 cm spine length x 4 cm with head-foot trim: 10.5 cm spine length x 4 cm largest brochure: 35 cm spine length x 25 cm Fpobvdeh I Ahxjkutjg with head-foot trimming: 34.6 cm spine length x 4 cm Up to 3100 cycles/h, depending on format and paper Front cutting device with upper/lower blade for cutting to 4 cm and sections larger than 1.5 cm, infinitely variable motorised format adjustment of the front cut with additional handwheel for fine adjustment, head and foot trimming of 3 - 20 mm each for approx. 120 pages of standard 80 g/m² paper 4 stiching heads

Condition: used, Year of construction: 2007, Format: max. 540x1000mm; min. 100x148mm Paper weight: 40-250g/sqm Loading capacity: 55mm Febsup Ut Ujvdkutjpg Output: max. 45,000 cycles/h compatible with: Horizon AFC-544AKT, Horizon AFC-546AKT Horizon AFC-564AKT, Horizon AFC-566AKT Horizon AFC-566F, Horizon AFC-566FKT Weight: 518kg good working condition available at short notice

Condition: used, Year of construction: 2016, Total prints: 3,768,802 Color: 3,316,984 B/W: 451,818 Machine can still be viewed in production and prints excellent quality Available at short notice Fpobvdkowcfd Heutsg