Condition: used, Year of construction: 2005, KOLBUS Perfect Binding Line KM 473 year 2005 The KOLBUS KM 473 perfect binder in combination with the ZU 841 gathering machine is a variant that meets short-term market development with quality, speed and versatility. The innovative technology and high flexibility make it possible to switch on the fly between different large print runs and special products. Overview: ZU 841.A gathering machine KM 473 perfect binder SOLEMA transport- and drying line SOLEMA DRYING STATION 25 cooling tower SOLEMA 20 splitting saw (year 1998) HD 142.P high capacity three knife trimmer RIMA XRS 130 compensating stacker Configuration: ZU 841.B gathering machine - handfeeding - 12 stations basic frame - 12 standard feeders with automatic section thickness control ATC - set up element - pile delivery with delivery conveyor ZA 841 - intermediate element - transfer into the binder - BECKER Air Center KM 473 perfect binder - copilot system with touchsreeen - 27 clamps - main milling station - 2 spine preparation stations - brushing station - without dust extraction system (machine was connected to a central dust extraction system) - Hotmelt spine gluing unit - Hotmelt side gluing unit - 2 x premelter LH 370 - lining station - rotary cover feeder RA 84.A - 2 pressing stations - lay down device Technical specifications: mechanical speed: up to 8.000 cycles/h size range max.: 320 x 390 x 70 mm size range max.: 190 x 460 x 70 mm size range min.: 100 x 105 x 3 mm SOLEMA transport and drying line - length approx. 45 m - incl. emergency delivery SOLEMA DRYING STATION 25 drying tower SOLEMA 20 splitting saw (year 1998) - right hand infeed - 1 saw blade - belt delivery with turning conveyor HD 142.P high capacity three knife trimmer Cshx Dvysv Rnfwjgsrb - right hand infeed - copilot with touch-screen - counter stacker - standard cutting tables - knife setting gauge Special equipment: - 2 sets of knives Technical specifications: mechanical speed: up to 3.900 cuts/h size range trimmed max.: 305 x 420 x 80 mm size range trimmed min.: 100 x 100 x 2 mm size range untrimmed max.: 310 x 430 x 80 mm stack height: max. 80 mm RIMA / KOLBUS XRS 130 compensating stacker - delivery to left and right Note: The SOLEMA book block feeder shown on the pictures is not included in the price!

Condition: excellent (used), Year of construction: 2017, MATICA S3400 - VERY GOOD PRICE - Card Printer & Embossing Machine Including computer and software For restaurants, hotels, fitness studios, and clubs For credit cards, access cards, ID cards, and loyalty cards Monochrome or two-color printing (YMCKO or monochrome) Resolution 300 x 300 dpi Duplex unit for double-sided printing Embossing unit Operation via color display Option for encoding magnetic stripes or chips Very good condition Fewer than 300 cards printed Cohx Dvjul Sqvjygorb

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, product width (max.): 350 mm, product height (min.): 210 mm, product height (max.): 500 mm, product width (min.): 148 mm, paper weight (min.): 60 g/m², paper weight (max.): 350 g/m², No reserve price - guaranteed sale at the highest bid! OVERVIEW - VAC-60a Gathering Tower - VAC-60c Gathering Tower Crjhx Dvyswcf D Hsgob - HOF-30 Stacker Drop Table Stitchliner 5500 Saddle Stitcher - ACF-30 Gathering and Folding Unit - SPF-30 Saddle Stitcher - HTS-30 Three-Side Trimmer TECHNICAL DETAILS Gathering Towers Model: VAC-60a / VAC-60c Technology: Touch & Work Type: Vacuum and Air Blower Gathering Tower Number of Stations: 6 Error Prevention: Misfeed, Double Feed, and Jam Detection Job Memory: 9 Memory Locations for Repeat Jobs Programs: Double Cycle (Non-Stop Operation), Interposer (1- and 2-Up), Booklet Program, Block Program, Selective Gathering Expandability: Up to 6 towers (36 stations) Format Range: Max. 148 - 500 × 120 - 350 mm Paper weight: 40 - 350 g/m² Loading capacity per station: 130 mm Production speed: up to 9,500 sets/h Power supply: 230 V; 50/60 Hz – 1.86 kW Dimensions (W × D × H): 842 × 652 × 1,961 mm Collating Towers Model: Horizon VAC-60Hc Function: Double-sided collating Use: Towers can be used separately Weight per tower: 310 kg Stack lowering table Model: Horizon HOF-30 Function: Non-stop operation despite misfeed and double feed detection Gathering system Model: Horizon Stitchliner 5500 Components: ACF-30 + SPF-30 + HTS-30 (Collating & Folding + Saddle Stitcher + Three-Side Trimmer) Format setting: Fully automatic Format templates: DIN formats and standard fold types Job memory: 200 memory locations for repeat jobs Stitching system Stitching options: Saddle stitch, block stitch, Corner stitching Stapling heads: 2 (optionally expandable to 4) Ring eyelet stitching: possible with ring eyelet stitching heads Staple spacing: 60 - 150 mm Stapling thickness: max. 5 mm (3 mm with ring eyelet) Processing Infeed format: 210 - 500 × 148 - 350 mm Paper weight: 60 - 350 g/m² Processing thickness: 8 - 200 pages Speed: max. 5,500 cycles/h Trimming Untrimmed format: 140 - 350 × 103 - 250 mm Trimmed format: 120 - 312 × 95 - 230 mm Space requirements and weight Installation area: min. 5,709 × 3,240 mm Stitchliner weight: 2,120 kg Power supply: 400 V / 50 Hz Part of the video shows a Horizon ST40, which was replaced with a HOF 30.

Condition: reconditioned (used), Now in stock at Glendale we have this refurbished Matrix 370P Metallic Automatic Pneumatic Laminator, inclusive of the MultiGraf Omni-Flow Sheet Feeder, Express Foiling Kit and Silent Compressor. This automatic pneumatic laminator is in excellent condition – it’s the newest version and includes a brand new upgraded grey heated roller. The Omni-Flow feeder allowing full automation of the laminating and foiling process. It is the ideal solution for short to medium run lamination requirements. The Matrix 370P Metallic is extremely cost-effective and allows faster-finish turnaround times. Developed for lamination and applying digital foil and special effects, to both textured and non-textured stocks, the Matrix Metallic range is the solution you’ve been looking for to get the best quality consistent digital foiling finishes across a variety of stocks. Designed for adding digital foil to prints, the most noticeable difference between the Matrix Metallic and Matrix ranges is the rollers. The texture of the roller on the Metallic is designed to get deep into the pitfalls of most coated and uncoated stocks, giving you the most consistent finish across the many different types of paper and card. The Matrix 370P Metallic pneumatic pressure rollers help to deliver superior lamination and with certain substrates, an increase up to 50% faster than the standard model. The pneumatic pressure roller also allows the use of standard OPP film on many digital printed images. This, in turn, reduces the cost of lamination by around 55%. This Matrix 370P pneumatic laminator has an easy to control swingout control panel, the steel lamination roller and the anti-curl device for laminating thinner stock. This pneumatic laminator incorporates semi-automatic feeding and automatic sheet separation. It is the ideal solution for short to medium run lamination requirements. The Matrix 370P Metallic is extremely cost-effective and allows faster-finish turnaround times. Included with the laminator is the Omni-Flow automatic sheet feeder, making the whole lamination and foiling process automated. The Omni-Flow has a load capacity of 100mm. The Omni-Flow will feed digital and litho printed stock into the laminator at working speeds of up to 10 metres per minute. The Omni-Flow will process sheet lengths up to 650mm or 1075mm, with the extension included, allowing extra-long sheets to be laminator when required. Crohx Dvov Urb Rsygsb The ever-popular foiling unit is included in this model. This allows digital foiling, holographic, glitter lamination and Spot UV-style effect to be produced. The foil unit makes this laminator multifunctional and offers added value to your print and design costs. Also included is the silent compressor, the compressor controls the pneumatic roller pressure allowing the laminator to work in a quiet office or industrial print room without any sound interference. Manufacturer Vivid Model Matrix 370P Metallic with Omni-Flow Feeder Condition Refurbished Stock Number 114928 Automatic Sheet Feeder Yes Anti-Curl Bar Yes Pneumatic Presser Rollers Yes Silent Compressor Yes Max Speed 10 metres/minute Max Laminating Film Width 340mm Max Sheet Length 650mm or 1075mm with Table Extension Warm Up Time 10 minutes Temperature Range 0-140° Dimensions W800mm x L1800mm x H1400mm without feeder. W800 x L2300mm x H1400mm with feeder. Power Supply 220/240V 50/60Hz

Condition: good (used), machine/vehicle number: 160612, Heidelberg roll feeder, machine number 160612, in good condition, available immediately. If you are interested, we would be happy to inform you about other machines in our facility. You are welcome to view the machine in our facility by appointment. Cshx Dvjvvifioygorb

Condition: used, Year of construction: 2008, material width: 330 mm, Printing Width: 330 mm Maximum Unwind Diameter: 1000 mm Maximum Rewind Diameter: 1000 mm 6 x UV (GEW)Units Chiller Rolls Cohx Dvowcd Tyjygerb Delam-Relam Cold foil Lamination Corona Treatment Web camera - BST Doble rotary die cutting station, 1 Gap Master Sheet cutting possible

Condition: refurbished (used), Year of construction: 2017, color channels: 7, number of print heads: 14, resolution (max.): 1,000 dpi, Vutek H2000 Pro UV HYbrid Printer Color 6 C+ White (lacquer) Resolution 1000dpi Speed up to 90 m2/h2 Print width 205 cm Roll 205cm Media/Handling • Handles rigid and sheeted media up to 80 in (2 m) wide and up to 2 in (5.08 cm) thick • Optional roll-to-roll production with the installation of unwinders and rewinders Crjhx Dvyswb Drgogjb Status fully refurbished Productivity • Best Quality Mode (1,000 dpi, heavy smoothing): 4 - 4 ft x 8 ft (1.2 m x 2.4 m) boards per hour or 225 ft2 (21 m2) per hour • POP Quality Mode (600 dpi, light smoothing): 14 - 4 ft x 8 ft (1.2 m x 2.4 m) boards per hour or 710 ft2 (66 m2) per hour • Up to Speed (600 dpi, no smoothing): 20 - 4 ft x 8 ft ( environmental considerations • Compressed air: 95-145 psi maximum at 4 cf/m—dry air only (not included) • Fully enclosed design for operator safety and environmental considerations • Temperature: 68°F to 86°F (20°C to 30°C) • Humidity: 30% to 80% (noncondensing) • Machine weight: 4550 lbs (2063.8 kg) • Height: 65 in (165.1 cm) • Width: 201 in (511 cm) • Depth: 66 in (168 cm) without tables • Electrical: 3-phase, 60 amps 200-230 volt supply

Condition: used, Year of construction: 2005, Mitsubishi Diamond 3000 S -5 is a printing machine manufactured by Mitsubishi in 2005, with a format of 720 x 1020 mm and a print count of 300 million. Currently in production in Turkey, it features IPC II Intelligent Press Control, high-speed separators, a refrigeration and recirculation system, Grafix Digitronic powder device, SAPC semi-automatic plate changers, non-stop feeders, cylinder washing device, automatic plate cylinder cocking, automatic blanket washing device, and Mitsubishi Delta dampening system. The delivery terms are FCA. Format: 720 x 1020 mm Equipment: Plate Cylinder Cocking blanket wash up device: autom. SAPC semi automatic plate changer Grafix Digitronic powder device wash device for impression cylinders Mitsubishi Delta Dampening Crjhx Dsvfxnxovygeb Refrigeration & Recirculation System Non-Stop Feeder IPC II Intelligent Press Control high speed separator

Condition: excellent (used), Year of construction: 2003, material width: 430 mm, 8-color UV flexo printing machine with lifting crane Web width 430mm Print width 420mm Unwinding 1000 mm Printing length from 8" to 24" Web run BST web edge control Web cleaning Teknek, both sides Printing units 8x Drying 8x IST UV drying (one unit defective) On rail 1x Delam-Relam, 1x turning cross Web monitoring E+L scan Punching 3x punching modules 1x double module, of which punching unit 1 is equipped with Gab-Mater 1x single module, before winding Winding 700 mm max. outer diameter Materials 15my film up to 350g/m2 cardboard Drive with vertical shaft, no servo without chiller Cjhjqa A Imjx Dvygjrb with lots of accessories

Condition: good (used), Year of construction: 2015, operating hours: 327,575 h, Functionality: fully functional, machine/vehicle number: EX, For sale is a used M&R Sportsman EX screen printing carousel 10/8 including accessories. The following items are included: 1) M&R Sportsman screen printing carousel 10/8 2) M&R Red Chilli bottle dryer Crjhxjwb Tbqs Dvygsb 3) M&R I-Kiss (for pre-ironing textiles) 4) 10x printing and flood squeegees 5) 2x squeegee claims for ink guidance The screen printing carousel has only produced approximately 330,000 prints to date and is for sale due to restructuring. The carousel is in perfect working order and can be tested on-site. No shipping; only pickup with your own disassembly is possible. A forklift can be provided on-site.

Condition: good (used), machine/vehicle number: 60324, Heidelberg GTS platen press, machine number 60324, in good condition, available immediately. If you are interested, we would be happy to inform you about other machines in our facility. You are welcome to view the machine in our facility by appointment. Cehxstukv Ss Dvygorb

Year of construction: 2016, Condition: used, Print Width: Up to 340 mm Maximum Print Speed: Up to 200 m/min Material Unwinder - Front loading - Transport device with tape tension measurement - Max roll diameter: 1000 mm - Pneumatic spindle - Controlled unwind tension via adjustable dancer - Adjustable unwind tension - End of roll detection - Joining table - Ultrasonic edge control - Mobile touch screen control panel - Centralized machine infrastructure control Corona Treatment - 1.5 kW generator - Pre-treatment head - Includes exhaust fume outlets Multi-process base unit - Robust construction with granite base - Accommodates two process stations - Two base platforms for flexo printing or die-cutting groups - Manual diagonal register adjustment for each station - Includes paper path extension in the last station for varnishing - Interface for connecting cooling water and compressed air - Includes decentralized control Flexo Printing Unit - Flexo printing unit with aluminum sleeve cylinder - Refrigerated counter-print cylinder - Direct servo drive for print and counter-print cylinders Crehxswcc A Hj Dvygjb Rotary Screen Printing Unit - Dual servo drive for format length adjustment and correction Upper Rails for Multi-Process Unit - Upper rail without control interface, compatible with laminating devices and waste rewinders. UV Drying System (9 positions) - Continuous power control relative to machine speed Die-cutting unit Rotary Die-Cutting with Front Loading (with cutting depth adjustment) Waste Rewinder Plus

Condition: good (used), Year of construction: 2019, color channels: 6, number of print heads: 6, Ocean Arizona 1260 GT Color 6 C CMYK 2 White Crjhx Dvowb Df Tjygsb Format 2.5m*1.25. Roll 2.2m Resolution 6pl-1440 dpi Variodot

Condition: used, Year of construction: 2010, Best price offered! Cshx Dowfqm Sovygorb

Year of construction: 2007, Condition: ready for operation (used), Herzog & Heymann internal gluing system ILS-011, built in 2007 Cshxevyaq Re Dvygerb Internal gluing system/alignment line as good as new

Condition: excellent (used), The digital printer provides the highest print quality thanks to the LED UV curing system and eight 6th generation Ricoh printheads with CMYK +2x WHITE + 2x VARNISH configuration. The machine allows you to print at a speed of 30 m2/hour on items, i.e.: -> ceramics; -> PVC boards -> corrugated cardboard or plastic. The maximum printing width on an item is 2500 mm. The plotter is equipped with RIP ONYX Software, Panasonic servomotor and TAIWAN HIWIN linear motor. Specifications of the YC2500HR large format printer - type of carrier: PVC, metal plates, glass, wooden boards, acrylic, ceramics, wallpaper, corrugated cardboard, plastic - RIP software: ONYX Software - printheads: Ricoh 6th generation - number of printheads: 8 Cehx Dvomrqy Ueygjrb - head configuration: CMYK + 2x WHITE + 2x VARNISH - maximum printing width: 2500 mm - printing resolution: 300*900 dpi, 600*600 dpi, 600*900 dpi, 600*1200 dpi - printing speed: 30 m2/hour - type of ink: UV ink - curing system: LED UV - saving format: TIFF, JPEG, Postscript, EPS, PDF - X-axis drive: TAIWAN HIWIN linear motor - servomotor: PANASONIC - YC2500HR printer guide: JANPAN THK - encoder: Metal Renishaw UK - USB interface: 2.0/3.0 - input voltage: single phase: 220V ± 10% (50/60 Hz, AC)

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 50 h, Functionality: fully functional, year of last overhaul: 2023, type of input current: AC, overall weight: 260 kg, Equipment: auto duplex, clamp, documentation/manual, double-sided, Dear sir or madam, we hereby offer our fully functional showroom machine. Powerful multifunction printer with dual function: FUJI ApeosPro C750 Overview: Copy/print function: colour/monochrome 81 ppm (A4), 80 ppm (8.5x11")*1 Scan function: colour/monochrome 270 ppm*2 High-resolution printing: 2,400 × 2,400 dpi Paper weight: 52 to 350 g/m² Crehertn E Esx Dvygob Paper size: 100 mm ×148 mm to 330 mm ×1,300 mm Supports oblong paper formats *1: Applies to model C810. For C750 it is 75 ppm and for C650 65 ppm. *2: 1 pass, double-sided scanning.

Condition: excellent (used), Year of construction: 2012, Ref:10937 . 2012 Onglematic PC / KH electric round corner machine. Cjhx Dvyov Uqp Tegerb • In full working order and in excellent condition • Bench top unit with electric foot pedal operation • Supplied with 1 round corner cutting die • Including instruction manual

Condition: new, BEST PRICE OFFER!!! Wholesale KODAK spare parts and consumables for Digimaster, NexPress, Versamark and miscellaneous. Vast majority of spare parts and consumables are new and sealed. Please consult the available quantities and codes as attached in pdf format. Potential clients must notice that the sale is bulk, not retail. Cehxot Ertqo Dvygjrb

Condition: ready for operation (used), Year of construction: 1980, Herzog & Heymann micro-folding machine KL112, built in 1980/1985 Shed feeder 176 1st station KL112 with 6 pockets Cohxovyapyj Dvygerb 2nd station KL112 with 4 pockets Standing floor delivery 177

Condition: good (used), Year of construction: 2010, Ref: 10940 . 2010 CMC Q-Cover One Semi Auto casemaker that turns-in one side at a time and folds the corners automatically. The cover is then passed into the nip-roller, output on collector table. Equipped with: Cjhxsv Uqpmo Dvygerb Huge variety of materials for high-quality cases and covers Lining operations on the same unit Stainless hot & cold gluing unit Automatic viscosity circuit and fast flushing system Case gauge for spine and pages Innovative corner tucking devices Vacuum-suction feeding belts for faster operation Easy-operation touchscreen Adjustable case-collection hopper Accessories: Large size kit for box production etc Specification: Min size: 15mm x 15mm Max. size turned edge: 46 x 78mm Max. size edge-to-edge: 50 x 80mm Minimum Height of Case 105 mm Maximum Open Flat Case 760 x 460 mm Paper thickness 100g/m2 – 170g/m2 Board thickness: 1.5mm - 3mm

Condition: ready for operation (used), Year of construction: 1993, Herzog & Heymann mini-folding machine KL112 – 0914, built in 1993 Flat pile feeder 176-0561 1st station KL112 with 6 pockets Transfer table 2nd station KL112 – 0875 with 4 pockets Standing floor delivery 177-0639 Crjhx Devyap Tsvygsb

Condition: good (used), Year of construction: 2010, Ref: 10939 . 2010 CMC Q-Cover Four Semi Auto casemaker that can turn in all four sides in one pass. Equipped with: Huge variety of materials for high-quality cases and covers High output, more than 300 pcs/h possible Lining operations on the same unit Computer-driven water injection and washing system Crohx Dvsv Uqnisygeb Stainless hot & cold gluing unit Automatic viscosity circuit and fast flushing system Case gauge for spine and pages Innovative corner tucking devices Vacuum-suction feeding belts for faster operation Easy-operation touchscreen Four-side turning-in in one pass Adjustable case-collection hopper Specification Min size: 15mm x 15mm Max. size turned edge: 46 x 78mm Max. size edge-to-edge: 50 x 80mm Minimum Height of Case 105 mm Maximum Open Flat Case 760 x 460 mm Paper thickness 100g/m2 – 170g/m2 Board thickness: 1.5mm - 3mm Weight: 730kg Dimensions 200 x 280 x 125cm

Condition: ready for operation (used), Year of construction: 1999, Herzog & Heymann micro-folding machine KL112 – 1250, built in 1999 Flat pile feeder, shingled 176-646 Crohovyaqdjx Dvygjb 1st station with 6 pockets Cold glue device HHS C210 with one glue head 6 segmented folding rollers 2nd station M7.40 with 4 pockets Standing floor delivery 177-876 Transfer table

Condition: good (used), Year of construction: 2012, Ref: 10938 . 2012 CMC Q-Case + Q-Press Casing-in machine for books, agendas, photo albums, photo books. Equipped with: Manual book block feeding Cover support and guide Automatic casing in 'Q- Finish' Integrated hydraulic press and joint forming machine Automatic book input and output High hydraulic pressure Heated plates and blades, with separate timers Adjustable pressure and temperature Features: No change over time Simple, precise and fast Does not require skilled personnel Automatically adapts to different thickness and size Book is perfectly finished in one pass Specification: Cjhx Dov Uqmrsvygjrb Minimum size: 100mm x 120mm Maximum size: 500mm x 420mm Book thickness: 2 - 80mm Weight: 380kg Dimensions: 90 x 80 x 150cm