Plate Bending Machine - 4 Rolls

AK-BEND AHS 30/13

Condition: used, Year of construction: 1973, pressure 200 t chamfer lenght 3600 mm distance between columns 2650 mm dayligth 500 mm throat 300 mm stroke 250 mm working feed 10,5 mm/sec return speed 100 mm/sec ram stroke speed 150 mm/sec Cedpfx Aot I D U Eenworb table height 900 mm oil volume 500 l total power requirement 37 kW weight of the machine ca. 17800 kg dimensions of the machine ca. 3710 x 1800 x 3390 mm Equipment: - Controlled axes Y1 + Y2 - Manual X-axis with digital position display - Set of upper and lower tools - 2x stop fingers - 2x front support arms - Hand and foot controls - Side + rear safety guard - Operating instructions

Condition: good (used), Year of construction: 1993, machine/vehicle number: 9340020, Offer 26035 Technical Data - Three powered rollers, each roller hydraulically adjustable - Suitable for prebending and cone rolling, side arms can be swung out - Operation from a swiveling control panel with digital actual value displays - Max. working width: 3050 mm - Max. plate thickness at 400 N/mm² yield strength without prebending: 20 mm - Prebending at minimum bending diameter 5 x top roller diameter: 16 mm - Top roller diameter: 340 mm - Side roller diameter: 250 mm - Bottom roller diameter: 300 mm - Drive: 400 V / 9.5 kW - Working speed adjustable - Space requirement: approx. W 6200 x H 1650 x D 1650 mm - Machine weight: approx. 16,000 kg - Total weight (machine + support column + support arm): 19,500 kg - Includes: extended roller ends for mounting profile rollers, Crodpfxeyq E S Es Anwob - conical bending device - lateral support arm hydraulically adjustable - upper support column hydraulically adjustable

Condition: good (used), Year of construction: 1995, roller (top) diameter: 330 mm, sheet thickness (max.): 23 mm, Manufacturer: IMCAR Type: SIHR Year of manufacture: 1995 Extended end for profile bending rolls (Pipe & T-Angle) Central lubrication Digital readout position side rolls Fully hydraulic machine Hydraulic drop end Hardened rolls Specifications Metric US Standard Roll width: 3100 mm Sheet thickness at 3 x top roll Ø: 18 mm Sheet thickness at 5 x top roll Ø: 23 mm Sheet thickness for initial bending: 20 mm Top roll Ø: 330 mm Side roll Ø: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min. Crodpewpku Dsfx Anwjb Number of driven rolls: 2 Power: 15 kW Dimensions (estimated) Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11900 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend you check all critical details.

Condition: excellent (used), Year of construction: 2008, Technical data: Working width: 3100 mm Bending capacity: 16.0 mm Pre-bending: 12.0 mm Top roll diameter: 310 mm Center roll diameter: 320 mm Side roll diameter: 240 mm Conical bending device via tilting of both side rolls Hardened rolls Mobile control panel with digital display Motor power: 15 kW CE marking Dimensions (L x W x H): approx. 5100 x 2100 x 1800 mm Weight: approx. 12.5 t Codpfx Anoytr Rmoworb The seller is not liable for typographical or data transmission errors. The machine's appearance, technical condition, and wear are consistent with its age; used machines are sold without any warranty.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 380 mm, roller (top) diameter: 430 mm, side roll diameter: 300 mm, roller diameter: 480 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 1,420 mm, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, overall weight: 20,000 kg, total length: 5,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 20 kW (27.19 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, model capacity 3000x35 mm Digital readout Hydraulic 4 roll plate bending machine, used year 2017 plate thickness rolling 35 mm pre-bend 30 mm minimum rolling diameter ID 480 mm plate max width on the rollers 3100 mm top roll size 430 mm Power on hydraulic unit 20kW Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted Cjdpeyu Nr Defx Anwsrb Digital position readout Hydraulic rotation central rolls driven parallelism lifetime with torsion bar Pre-pinch load adjustable for pre-bending Drop-end top roll front open for unloading Re-rolling system for welded shells calibration. Safety and emergency stop Manuals and schematics – CE declaration of quality machine dimension 5500x2000x2100 mm weight 20ton --- Additional accessories installed with the machine See layout drawing in enclosed nr.1 central support hydraulic 4 ton capacity to support large shell dia up to 4,5 meters id nr.1 side support hydraulic left side 4 ton doble arm nr. 1 side support hydraulic right side 4 ton double arm

Condition: good (used), Year of construction: 2008, overall weight: 8,700 kg, Brand: Korpleg Model: Premier PHB 3130 Serial No.: 22380608 Year: 2008 Axes: 2 (Y, X) Control: Delem DA-41 (Bending sequence programming, tool loading, manual mode, etc.) Crjdpswlngcsfx Anwjb Power: 130 tons Bending length: 3200 mm Span between uprights: 2650 mm Gooseneck: 320 mm Backgauge: 600 mm Motor: 7.5 kW Weight: 8,700 kg

Condition: excellent (used), Gas burner Weishaupt G5/1D 12x Existing Year: 1991 till 2004 Cjdpfx Aei Dh Ikjnworb Power 830Kw Мы говорим по русски! Viewing please only after telephone agreement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible

Condition: ready for operation (used), You are bidding here on a folding machine (press brake) from the well-known German manufacturer Biegemaster. Device features: - Bending length: slightly over 6 meters - Sheet thickness: 1 mm for steel, approx. 1.5 mm for aluminum - Adjustable angle (see photo) - Emergency stop - Sheet support - Hand and foot operation (professionally retrofitted) Crodpjykbu Nsfx Anwjb - Rotary shear - Advantage of this design: already folded sheets can also be edged again from the side - Free loading possible - You will receive an invoice according to §25a UStG - I can arrange forwarding agents if requested Free loading as shown in the pictures. Inspection and testing are possible by appointment over the phone. Payment in cash upon collection – if you need anything else, please give me a quick call – thank you. Collection should take place within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway) Item number

Condition: good (used), Year of construction: 2008, pressing force: 160 t, stroke length: 290 mm, overall weight: 11,000 kg, working width: 4,100 mm, distance between side stands: 3,550 mm, Brand: Dener Model: DMP 160/40 Year: 2008 Bending length: 4,100 mm Force: 160 tons 2 axes (Y, X) *Torsion bar machine, Y axis Crjdewi Sktopfx Anwsb X stop: 650 mm Cylinder stroke: 290 mm Distance between uprights: 3,550 mm NC control: Dener HT062 Neck: 450 mm Motor power: 15 HP Weight: 11,000 kg

Condition: used, functionality: fully functional, Year of construction: 2008, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 1,100 mm, side roll diameter: 980 mm, roller diameter: 1,430 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 4,160 mm, sheet thickness (max.): 200 mm, sheet thickness steel (max.): 200 mm, overall weight: 225,000 kg, total length: 9,000 mm, total width: 5,580 mm, total height: 6,100 mm, power: 220 kW (299.12 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG3200 3 roll capacity 3100x200 mm year of make 2008 Capacity : Plate width mm. 3000 Rolling thickness mm. 200 Pre-bend thickness mm. 160 -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Planetary design with pre-pinch fully hydraulic Rolls surface length mm. 3100 Top roll mm. 1100 Side rolls mm. 980 Electric power on hydraulic unit Hp 220 + Hp 180 Voltage 400 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. Credpfx Anjyvgaueweb -Centralized operator panel with directional joysticks electric. -Digital position readout of the bending rolls. -Oil cooler automatic unit heat exchanger. -Emergency and safety installations, certified CE -User manuals and instruction books in English -Dimension 9000 x 5580 x H 6100 mm -Weight approx. 225 Ton.